Arcus LRM-LR User manual
INSTRUCTION
FOR USE
LRM-LR Adaptor
GA195GB-12.21
Phone
General
+49 (0) 89 / 436 04-0
Seat of the Company
Truderinger Str. 199
D-81673 Munich
Internet
www.ARCUS-Schiffmann.com
Fax
Sales Department
+49 (0) 89 / 436 04 73
Fax
General
+49 (0) 89 / 431 68 88
Technical data Construction
Type no. 610 409
Phase line only
Type no. 610 406
Earth and phase line
LRM-LR Adaptor
Threshold voltage: max. 5 V
Frequency: 50 Hz
Connections: LRM (plug)
LR (socket)
Standard: EN 61243-5
Environmental temperature: -30 °C up to +60 °C
Weight: 20 g
Type no. 610 411
1x Type no. 610 406
1x Type no. 610 409
Please find instruction for professional
phase angle measurement in the
instruction for use of ARCUSPHASE.
Periodic interface testing and voltage test:
Connect the LRM-LR Adaptor with earth-
and phase line (Type no. 610 406) to the
red measurement line L1 of ARCUS-
PHASE. For further professional periodic
interface testing and voltage test, please
consult the instruction for use of ARCUS-
PHASE.
Cleaning
For cleaning use a watered cloth. Mind
that the LRM-LR Adaptor is totally dry!
Latest after 6 years
(periodic testing)
Periodic testing to EN 61243-5, is to be
carried out latest after 6 years. Last
periodic testing is shown on the label of
the LRM-LR Adaptor.
Waste disposal
Observe local regulations for disposal of
LRM-LR Adaptor and packing.
ARCUS Schiffmann will not be reliable for
unsuitable disposal.
For queries concerning used materials
please contact ARCUS Schiffmann.
Product liability and guarantee
This instruction for use was written with
greatest care and examined before
publishing.
Basis for guarantee is the proven
observation of this instruction for use
for storage, assembly, operation,
maintenance and care.
Valid are the GENERAL CONDITIONS
FOR THE SUPPLY OF PRODUCTS AND
SERVICES OF THE ELCTRICAL AND
ELECTRONICS INDUSTRY.
Application
This LRM-LR Adaptor was developed
specially as accessory for ARCUSPHASE.
It is an electric and mechanic adaption
from LRM- to LR-voltage detection
systems. Before usage of this LRM-LR
Adaptor, please read the instruction for
use of ARCUSPHASE. In case parts are
damaged and operational reliability is
limited, or labels are illegible, withdraw the
LRM-LR Adaptor from further use!
Measurement of phase angle:
Connect the LRM-LR Adaptor with earth-
and phase line (Type no. 610 406) to the
red measurement line L1 of ARCUS-
PHASE, and the LRM-LR Adaptor with
phase line (Type no. 610 409) to Lx.
Storage
Store LRM-LR Adaptor in a dry place.
Application (Continued)
Other Arcus Receiver manuals
