argon audio SA1 User manual

www.argonaudio.com
SA1 Quick start
We care about the Environment
By refraining from inserting a full printed manual with our Argon Audio
products we save more than 20 tons of paper each year.
See back side of this insert for Quick start guide
Safety
Safety Instructions
•Unplug this product from the wall outlet before cleaning. Do
not use this product near water or moisture. Do not spill
liquids on the product. Clean only with a dry cloth.
•Place the unit on a solid surface.
•Do not put it in a closed bookcase or a cabinet that may keep
air from flowing through its ventilation openings.
•Do not install near any heat sources, such as radiators, heat
registers, stoves or other appliances that produce heat.
•Protect the power cord from being walked on or pinched,
particularly at plugs and the point where they exit from the
product.
•During Lightning storms, unplug the product from the power
source or if unused for long periods of time. This will prevent
lightning and power-line surge damage to the product.
•Do not attempt to service this product yourself. Opening or
removing covers may expose you to dangerous voltages or
other hazards. Please contact the manufacturer to be referred
to an authorized service center near you.
•Do not overload wall outlets, extension cords, or integral
power circuits as this can result in a risk of fire or electric
shock.
•Never push any object through the product openings, as this
can result in fire, electric shock or damage.
•Use proper power sources. Plug the product into a proper
power source, as described in the operating instructions or as
marked on the product.
If there is a Lightning flash with an arrow head
on the product, it’s intended to alert the User
of the presence of un-insulated “dangerous
voltage” within the product, that might be of
sufficient magnitude to constitute a risk of
electric shock to persons.
If there is an Exclamation point on the
product, it’s intended to alert the User that
there is important operating and maintenance
(servicing) information in the User manual.
If there is a double rectangular symbol on the
product, it means that the product is double
insulated. Earth connection is not required.

www.argonaudio.com
SA1 Quick start
Quick start
1. Connect the Power cord into an electric outlet and into
the back of the Amplifier.
2. Connect your speakers to the Amplifier using normal
speaker cable.
3. Connect your source player (tablet, laptop, mobile
phone, CD player, TV) to an input on the amplifier, using
the input connection that fits your source device best.
4. The SA1 has a pre out, enabling you to connect an
active subwoofer or a power amplifier.
Basic Operating
1. Power ON from standby is done either by pressing the
Power button on the SA1 or the Power button on the
Remote.
2. Entering Stand-by is done by either a short press on the
Power button on the SA1 or by pressing the Power
button on the remote
3. Input source is automatically sensed. Once a music
source is playing the SA1 will automatically switch to the
latest chosen input source. You can also manually
choose your input source using the remote control.
4. BT pairing is done by choosing the BT input source on
the SA1. The SA1 will then automatically go into pairing
mode. Use your phone, Laptop or tablet to pair and
connect.
Overview of inputs
①②③④⑤⑥⑦⑧⑨⑩
1. Ground
2. USB power for Chromecast
3. Phono (MM) for turntable only
4. Line in for analogue sources (AUX)
5. Optical 1 (D1), optimized for TV input
6. Optical 2 (D2), optimized for HiFi listening
7. Pre out for pre-amplifier or subwoofer
8. Speaker right
9. Speaker left
10. Power