Argos London Clock 239/7106 User manual

Thank you for your purchase of this radio controlled alarm clock. Please note that this clock may take up to 24
hours to receive a signal. Please read these instructions carefully and keep the manual for future reference.
INSTALLATION
1. Place your clock face down on a flat and soft surface.
2. Remove the battery cover at the back of the clock.
3. Insert 2 x new AAA batteries into the battery compartment by observing the correct “+” and “-“ polarity.
4. Replace the battery cover.
FUNCTIONS
RADIO CONTROL FUNCTION
Your new clock is designed to set the time automatically in the United Kingdom only, via a transmitted radio
signal.
As with all wireless devices, the ability to receive the signal may be affected by, but not limited to, the following
circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings

Near railways, high voltage cables etc
Near motorways, airports etc
Near construction site
Inside concrete buildings
Near electrical appliances
Near computers and TVs
Inside moving vehicles
Near metallic structures
Place your clock at a location with optimal signal, ie close to a window and away from metal surfaces or
electrical appliances. If the clock does not pick up signal within 24 hours, try the clock in a different location.
AUTOMATIC TIME SETTING
1. Once you have inserted the batteries, the alarm clock will beep and will show default settings (12:00 as
the time and 1/1 as the date and month). The radio control icon ( ) will begin to flash, which indicates
that the clock is receiving signal.
2. Please see the below indications for help with understanding if the time has been set successfully.
If there is a weak or no signal - the icon will flash
If the clock is receiving a strong signal –the icon will flash
If the clock has successful reception - the icon will become static
If the clock has failed reception –the icon will disappear
3. Your clock will start automatic reception everyday at 1:00, 2:00 and 3:00. If it fails to receive the time
signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails again, it
will start automatic reception at 1:00 again the next day.
MANUAL RECEPTION: Press and hold the C/F/ button on the back of the clock for 3 seconds to start manual
reception. To stop manual reception, press and hold the C/F/ button on the back of the clock for 3 seconds.
Please note that when your clock is receiving the radio controlled signal, all buttons expect the “Snooze.Light”
button on the top of the clock will not function.
TO SET THE TIME, 12/24HR TIME AND CALENDAR
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. The setting will occur in the following sequence: Hour→ Minute→ 12HR/24HR→ Year→ Month→ Date→
Snooze Duration.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit begins to
flash. Use the or C/F/ buttons on the back of the clock to select the correct hour. (Press and hold
the or C/F/ buttons to accelerate setting). The hour only needs to be set if no radio control signal
can be received. Press the “SET” button on the back of the clock to confirm.
3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct minute. (Press and hold the or C/F/ buttons to accelerate setting). The minute only needs
to be set if no radio control signal can be received. Press the “SET” button on the back of the clock to
confirm.
4. The time digits will now flash 12Hr. Use the or C/F/ buttons on the back of the clock to select 12Hr
or 24Hr. If you select 12Hr format, “P” will appear to the left of the time digits to indicate the afternoon
time. There is no AM icon to indicate the time before noon. Once you have chosen 12Hr or 24Hr, press
the “SET” button on the back of the clock to confirm.
5. The year will now flash. Use the or C/F/ buttons on the back of the clock to select the correct
year. (Press and hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the
back of the clock to confirm.

6. The month digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct month. (Press and hold the or C/F/ buttons to accelerate setting). Press the “SET” button
on the back of the clock to confirm.
7. The date digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
correct date. (Press and hold the or C/F/ buttons to accelerate setting). The day will change
automatically according to the date. Press the “SET” button on the back of the clock to confirm.
8. The LCD display will now change to “05”. Use the or C/F/ buttons on the back of the clock to
select the desired snooze duration –please note snooze duration can be selected from 5 to 60 minutes.
(Press and hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the back of
the clock to confirm and return to normal time display.
TO SET ALARM 1
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. With the clock in normal time display, press the “SET” button on the back of the clock once, 6:00 (AM)
and will appear.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. Use
the or C/F/ buttons on the back of the clock to select the desired hour for Alarm 1. (Press and
hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the back of the clock to
confirm.
3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
desired minute for Alarm 1. (Press and hold the or C/F/ buttons to accelerate setting). Press the
“SET” button on the back of the clock to confirm and return to normal time display.
TO SET ALARM 2
Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to
the normal time display mode.
1. With the clock in normal time display, press the “SET” button on the back of the clock twice, 6:00 (AM)
and will appear.
2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. Use
the or C/F/ buttons on the back of the clock to select the desired hour for Alarm 2. (Press and
hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the back of the clock to
confirm.
3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the
desired minute for Alarm 2. (Press and hold the or C/F/ buttons to accelerate setting). Press the
“SET” button on the back of the clock to confirm and return to normal time display.
Please note the duration of the alarm is 2 minutes.
TO TURN ALARM 1 AND 2 ON AND OFF
With the clock in normal time display:
1. Press the “ALM 1.2” button on the back of the clock once to activate Alarm 1. will appear to
indicate Alarm 1 has been activated.
2. Press the “ALM 1.2” button on the back of the clock twice to activate Alarm 2. will appear to
indicate Alarm 2 has been activated.
3. Press the “ALM 1.2” button on the back of the clock three times to activate both Alarm 1 and 2. Both
and will appear to indicate Alarm 1 and Alarm 2 have been activated.
4. Press the “ALM 1.2” button on the back of the clock four times to deactivate both alarms. Both and
will disappear to indicate that both alarms have been deactivated.

TO USE THE BACKLIGHT
At normal time display, press the “SNOOZE/LIGHT” button on the top of the clock. The backlight will activate
and will last for around 5 seconds and then go off.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related alarm icon will flash. Press the “ALM 1.2” button on the back of the
clock once to stop the alarm and reset it to come on the following day. After that both and/or will
remain on the display.
TO ACTIVATE THE SNOOZE FUNCTION
When alarm 1 or 2 is sounding, press the “SNOOZE.LIGHT” button on the top of the clock once to silence the
alarm. The default snooze duration is 5 minutes.
Note: If Alarm 2 activates while Alarm 1 is sounding or is in snooze mode, Alarm 2 will override Alarm 1 and
Alarm 1 will be reset to come on the following day.
TEMPERATURE
1. There is a temperature display function on this clock.
2. When the clock is in normal display, press the C/F/ button on the back of the clock to switch the
temperature between Celsius (°C) and Fahrenheit (°F).
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, press the RESET button on the back of your
clock. Your clock will be reset to default settings and it will start to receive the radio controlled time signal
again. PLEASE NOTE THAT THIS CLOCK MAY TAKE UP TO 24HRS TO RECEIVE RC SIGNAL.
Please note that constant use of the backlight will significantly reduce battery life.
SPECIFICATIONS
Indoor Temperature Range 0°C to +50°C (+32°F to +122°F)
Temperature Resolution 0.1C
Alarm Duration 2 minutes
Min Snooze Duration 5 minutes
Care instructions
Wipe clock with a soft dry cloth only. Stronger agents such as Benzene, thinner or similar materials can
damage the surface of the unit.
Place your clock on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
Protect your furniture when placing your clock on a natural wood and lacquered finish by using a cloth or
protective material between the clock and the furniture.
Alkaline batteries are recommended for optimal usage of this clock. Replace battery every 12 months or
when the clock stops.
If the clock is not to be used for a prolonged period, such as a month or longer, remove the batteries to
prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the
compartment thoroughly and replace the batteries.
Battery safety & disposal
Dispose of batteries and electrical products responsibly at local authority household waste
recycling facility.
DO NOT dispose of batteries in a fire as the batteries may explode or leak.
Never use rechargeable batteries.
Replace all batteries at the same time; NEVER mix new and used batteries, different types
or brands.

Never try to dismantle batteries.
Never short circuit batteries.
Exhausted batteries must be removed from the clock promptly.
Remove batteries from the product before extended storage.
This symbol indicates that this product, and any batteries, should not be disposed of in
normal household waste but taken to appropriate local recycling centres, where available.
Never throw batteries in a fire or attempt to open outer casing.