ARGtek ARG-1211 User manual

ARGtek ARG-1211 1500mW DD-WRT AP Router
Quick Installation Guide

The AP Router is delivered with the following factory default parameters on the Ethernet LAN interfaces.
Default IP Address: 10.10.10.254
Default IP subnet mask: 255.255.255.0
Web login User Name: admin
Web login Password: admin
I. Connect Antenna, plug the power adapter, and locate the Ethernet cable to the 1211’s LAN port
(1~4)
And the end port connect to PC or Notebook.
Waiting for like 10~20 to power on.
LAN Port : Four local Ethernet ports for connecting the local computers
WAN port for connecting to a cable or ADSL modem
Reset Button -Factory default reset button
DC Power Intput –Connect Power Adapter

II. Setting to DHCP
III. Go Default IP: 10.10.10.254, input admin, admin for the user name and password
IV. Enter User WEB interface –Select language
*Only ARGtek Title is the original product, others are faked*

V. ARG-1211 provides four operation modes: (Gateway、Bridge、WISP、AP Client)
With 7 Applications:
1. Gateway
AP mode(enable Router function)
2. Bridge (disable Router function)
2-1. Bridge AP
AP mode(disable Router function)
2-2. Bridge Client
Client mode(disable Router function)
2-3. Bridge WDS
Wireless Distribution System Bridge
2-4. Bridge WDS + Repeater
WDS and repeater(AP)
3. WISP
Client mode(enable Router function)
4. AP Client(Universal Repeater)
WISP and repeater(AP)
1.Gateway (AP Router) ： (enable Router function)
This feature is often used when connect PPPoE broadband operators offer, DHCP (dynamic) or Static (fixed)
IP and use port forwarding (NAT) and routing functions
2-1. Bridge AP : AP mode (disable Router function)

2-2. Bridge Client: Client mode (disable Router function)
This function use in the receiving Wi-Fi signals do forwarding and routing functionality and allows users to
access the network cable wired Internet
2-3. Bridge WDS: Wireless Distribution System Bridge
This function is used between two or multi- points in each ARG-1211 using WDS Transfer Protocol
(Image transfer is often used in this mode)
2-4. Bridge WDS + Repeater: WDS and repeater (AP)
This function is used between two or multi- points in each ARG-1211 using WDS transfer protocol wireless
bridge through ARG-1211 at various points forwards wireless signal allows users around to have wireless
access.

3. WISP: Client mode (enable Router function)
This function is used in the receiving Wi-Fi signals do forwarding and routing functions and allows users to
access the network cable wired Internet
4. AP Client : WISP and repeater (AP)
This function is used in the receiving Wi-Fi signals do forwarding and routing functions and allows users to
access the network cable wired Internet and wireless signal forwarding allows users wireless Internet
access

**For DD-WRT Interface*
Our ARG-1211 works with the DD-WRT 3rd party software, for more details you can check
Our YouTube Channel.
https://www.youtube.com/user/ARGtek100
Note: You can check the User Manual of ARG-121 for 7 applications Web Interface
configuration. *Download it from our website at www.argtek.com*

Remark:
1. How to export the Configuration file?
*For this function, you can export the configuration file, so you don't need to make the setting from the
start again for the 2nd one/ or others ARG-1211*
Go To Administrator Settings ManagementExport Settings Export
2. How to import the Configuration file?
*For this function, you can save the configuration file to the 2nd one/ or others ARG-1211*
Go To Administrator Settings ManagementImport Settings Select file *the file you download from
the 1st above Import

Enjoy your wireless environment with our high power AP –Power King –X Triple
For more queries, please write email to : [e-mail] Or
Visit : www.argtek.com
https://www.youtube.com/user/ARGtek100
https://www.facebook.com/pages/ARGtek-Communication-Inc-Ltd/137452079672104