Argus SU-200B User manual

Mounting instructions CPU Cooler SU-200B 88885519
Danger and protection
- Don´t grab into the running fan.
- Don´t block the fan. Blockieren Sie nicht den Lüfter. Achten Sie darauf, dass Kabel nicht den Lüfter behindern.
- Pull out the power cord in case of strange noise or smell.
- Take care that all cable will be fixed permanently.
- Keep the product away from children.
- Keep the product free from dust (Can cause overheating or fire)
- Look for sufficient airflow to avoid overheating or fire.
Maintenance
This product needs no maintenance which requires opening of the fan. Clean the fan from dust to get a optimal cooling efficiency. Unplug the computer
from the main supply when working inside.
Warranty
Inter-Tech grants 12 months warranty by proper use up from the date of purchase. In case of warranty please contact your local dealer or the dealer from
which you bought the product. We will grant no warranty by:
- Missing or damaged warranty seal,
- Negligent behavior,
- Nonobservance of the manual,
- Improper use,
- External violence,
- Acts of god
- Damages caused by manipulation, upgrading, updating or reconstruction of hardware or software
- Damages caused by other harm,
IIn case of data loss Inter-Tech will only be liable at wanton negligence or deliberate intention or, in all other cases, only for the recovery of data from a
continous, daily backup. Inter-Tech does not assume liability for all other matters. Please look also at our complete warranty terms on our website.
Disposal
Please dispose your product by using the special discharge point for electronic waste. Please ask your municipality or disposal company in case of further
questions.
Scope of delivery
Contact
Inter-Tech Elektronik Handels GmbH, Hainhäuser Weg 93, D-30855 Langenhagen, Deutschland. Tel: [phone] - Email: [email protected]
Internet: www.inter-tech.de
Please read the following instructions carefully before installing or using the CPU Cooler. Keep this instructions and forward them when you forward the
CPU Cooler. The nonobservance of this instructions can cause violation or damage. We disclaim liability for damages or violation caused by the non-
observance of this instructions.
Intended use
This product is only for indoor use and mounting inside of computer cases. Don´t store or use it in humid rooms or near of water.
The included socket adapter B is for Intel-Socket 1150/ 1151/ 1155/ 1156/ 1366 mounting. This cooler won´t fit on any other
socket as those mentioned before.
AB C

Preparation for Intel:
Preparation for Intel + AMD
3
Coat the processor with the included
thermal compound.
4
Fix the fan B with brackets C at cooler A.
Mounting Intel: Mounting AMD:
Hook this side of the cooler first
Then hook this side
At last connect the 4pin plug of the cooler with the according socket on your mainboard. Please read also the manual of the
mainboard. The installation is complete now.
1
Adjust all brackets on the back plate D depending
your CPU socket.
1366/ 2011
115x
775
Place the back plate D behind the mainboard and fix it
with screws through the ring H. Some mainboards have the
back plate already installed. In this case you dont need
the back plate D.
2
Ring H
Halterung D
Mounting:
1
Adjust all brackets on the back plate B depending
your CPU socket.
3
Coat the processor with the included
thermal compound.
1366
115x
Place the back plate B behind the mainboard and fix it with the screws mounted at the cooler. Some mainboards have the
back plate already installed. In this case you dont need the back plate B.
2