Arkon SM588 User manual

SM588
| Flexible Gooseneck Seat Bolt or Floor Mount for Smartphones and 7” Tablets
With a socket wrench, loosen the passenger seat track bolt, insert
the seat track bolt bracket, and retighten the seat track bolt.
Step 1.
Screw the mount bracket to the mount. Depending on your vehicle,
you may need to change the orientation of the bracket.
Attach the Floor / Console Bracket with screws.
Step 1.
Step 2.
Adjust the steel shaft by bending with both hands to the
desired location of the male dual T head.
Step 1.
Passenger Seat Bolt Mounting
Alternative Floor or Console Mounting
For a more permanent mount, connect the Floor / Console Mount Bracket
to the oor or console. This will require drilling into your vehicle’s
interior surface.
Pedestal Head Adjustments
Continued on other side...
For a simple mount that can be easily moved to another vehicle, install
using the passenger seat track bolt.
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
The Mobile Mounting Specialists™
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2011 Arkon Resources, Inc.
!Drilling into the dash, oor, or console will permanently damage
the vehicle. Use caution and consult a mobile install professional
to avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
11
2
2
3
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
Do not place mount in or near an air bag deployment zone or where it
will obstruct view of the road.
!
Package Contents:
(1) GN088 - 20” Flexible aluminum gooseneck oor or console mount
Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4)Screws
(1) SM050-2 - Slim-Grip™ holder for Smartphones and 7” tablets
(1) SP-SM050-LF - Extra Long Support Legs (2 Pack) for larger phones and
tablets
SM588
Flexible Gooseneck
Floor or Console Mount
Mount Bracket
Floor Bracket
SM588
Flexible Gooseneck
Floor or Console Mount
A
A
A
A
B
B
Install the Support Legs to the Holder
Step 1. Insert the holder support legs (A) by sliding them into the
support leg grooves (B) on the top and bottom of the holder.
SP-SM050-LF
Extra Long
Support Legs
(2 Pack)

Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
The Mobile Mounting Specialists™
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2011 Arkon Resources, Inc.
SM588
| Flexible Gooseneck Seat Bolt or Floor Mount for Smartphones and 7” Tablets
(iPhone device
not included)
F
E
Secure holder with your hand for support, as spring-loaded
mechanism requires signicant force to operate. Hold your
phone and insert into universal holder by pushing down on the
bottom spring-loaded support legs with moderate amount of
pressure (E). Slide the top of the device under the top support
legs (F) until it ts snuggly in the holder.
Insert Phone or Tablet into Holder
Step 1.
Adjusting Holder to Fit Phone
G
G
If necessary, adjust the support legs (G) on top and bottom by
sliding them laterally to avoid any buttons or ports that may be
on your phone or tablet.
Step 1.
Fitting for Larger Phones
A
AB
Step 1. For larger phones such as the Motorola Droid X and tablets,
install the two included extra long support legs Insert the
extra long support legs (A) by sliding them into the support
leg grooves (B) on the top and bottom of the holder.
Attach the Holder to the Gooseneck
Step 1. Attach the smartphone and tablet holder to the oor / console
mount by inserting the dual T-tabs on the mount to the dual
T-slots on the holder.