armen LIVING LCMUBDGRKGB User manual

1/5
Product Assembly Instructions
Item # LCMUBDGRKGB NOT PROVIDED

A: Headboard x 1
H: Bolt / M6*20 x 18
I: Flat Washer / Ø19 x 24
J: Lock Washer / Ø12 x 24
K: Allen wrench x 1
L: Bolt M6*35 x 4
M: Nuts M8 x 4
N: Washer Semicircle x 4
O: Bolt M8*90 x 2
Q: Screw M4*30 x 8
R: Wrench x 1
C: Side Panel x 2
B: Footboard x 1
D: Middle bar x 2 E: Slats x 16 F: Leg x 2
G: Support Leg x 4
P: Threaded Rod M8*70 x 2
2/5

K
H
J
I
K
H
J
I
P
B
F
Step 1 : Turn the Footboard (B) over and place it on the ground where the exterior finish will not be scratched.
Align the screw holes on the Footboard(B) with the screw holes of Legs (F).
Insert flat washers (I) lock washer (J) and bolt (H) into each hole.
Once the screws are in place,tighten the screw until firmly attached with the allen-wrench (K) provided.
Step 2: Insert Threaded Rod(P) into the middle hole of footboard(B), tighten the screw until firmly attached.
KHJI
UNDER
K
H
J
I
A
B
C
C
Step 3 : Align the screw holes on the Side panel(C) with the screw holes of Headboard(A) and Footboard(B).
Insert flat washers (I) lock washer (J) and bolt (H) into each hole.
Once the screws are in place, tighten the screw until firmly attached with the allen-wrench (K) provided.
Step 4: Under footboard(B), insert flat washers (I) lock washer (J) and bolt (H) into each hole and tighten the
screw until firmly attached with the allen-wrench(K) provided.
3/5

UNDER
HEAD
FOOT
HEAD
P
NIJM
R
FOOT
RM
I
J
N
IJ
O
K
N
IJM
R
IJO
K
R
N
I
J
M
K
L
D
G
A
B
C
C
Step 5 : Under position connect Footboard(B) with Side Panel(C). Insert Semicircle Washer(N), Flat Washer(I), Lock Washer(J),
Nut(M) with Threaded Rod(P). Tighten the screw until firmly attached with the wrench(R) provided.
Step 6 : Under position connect Headboard(A) with Side Panel(C). Insert Semicircle Washer(N), Flat Washer(I), Lock Washer(J),
Nut(M) with Flat Washer(I), Lock Washer(J) and Bolt(O). Tighten the screw until firmly attached with the allen-wrench(K) provided.
Step 7 : Align and fix the connect bracket of Middle Bar(D) with connect
bracket on Headboard(A) and Footboard(B) follow direction arrow.
Align the screw holes on the Support Leg(G) with the screw holes of Middle
Bar(D). Insert bolt(L) into each hole and tighten the screw until firmly attached
with the allen-wrench(K) provided
4/5
D
D
G
G

Q
E
Step 8 : Put on slats into the frame. Insert the screws (Q) into each hole.
Once the screws are in place,tighten the screw until firmly attached with the screwdriver.
Finished
5/5