armen LIVING T21962A-C User manual

Step 1: Place the metal leg on a safe surface where they can’t be scratched or damaged.
Step 2: Use (4) spacer and (2) bolt (M6*25)/(M8*25) to tighten the upper/bottom connecting tube and metal
leg with the Allen Key. Repeat until all sides are bolted.
Step 3: Place (4)sucker on the metal leg’s hole.
Step 4: Put the table top on the table base, and make sure that it connects with the suckers firmly.
#
Picture
Description
Quantity
1
Metal leg
2
2
Connecting
tube(bottom)
1
3
Connecting
tube(upper)
1
4
Table top
1
5
Spacer
4
6
sucker
4
7
Bolt((M8*25)
4
8
Bolt((M6*25)
4
9
Allen Key(5#)
1
10
Allen Key(4#)
1
PRODUCT ASSEMBLY INSTRUCTIONS
Instructions
Item#: T21962A-C
Step 5: Test the table is firmly on the ground and the
table does not wiggle.
Step 6: Enjoy your new table.
Helpers needed to assemble: 2
Estimate time frame to assemble: 30 minutes

•Step 1: On the top of the plate use (4) spacers and (4) bolt (M6 x 16 ) to tighten the top portion of the plate with the
Allen Key. Repeat until all 4 sides are bolted.
•Step 2: Turn the dining chair legs upside down to tighten the swivel plate underneath.
•Step 3: Once the swivel is secure, we will add the seat under the dining chair to connect the seat to the legs.
#
Picture
Description
Quantity
1
Seat
1
2
legs
1
3
Spacer
4
4
Bolt(M6X16)
4
5
Allen Key
1
Product Assembly Instructions
Item#: DC19394C-B
•Step 4: Flip the dining chair over upright as seen.
•Step 5: Test the dining chair is firmly on the ground and the seat does not wiggle.
•Step 6: Sit and enjoy your new dining chair.
Helpers needed to assemble: 2
Estimate time frame to assemble: 20 minutes