armen LIVING LCMUDRGR User manual

1/2
C: Bolt / M8*20
D: Flat Washer / Ø19
F: Allenkey V4
G: Bolt / M6*15
x 8
x 8
x 8
x 1
x 4
H: Insert nut
I: Screw M4*20
J: Screw M4*40
K: Anti - flip A
L: Anti - flip B
x 4
x 4
x 4
x 4
x 2
E: Lock Washer / Ø12
Step 2 :
Align the screw holes of the legs (B) with the screw holes of the bottom Chest(A).
Insert flat washers (D) lock washer (E) and bolt (C) into each hole,
Once the screws are in place,tighten the screw until firmly attached with the
allen-wrench (F) provided.
Step 1 : Turn the chest over (A) and place it on the ground where the exterior finish
will not be scratched.
Align the screw holes of the legs (B) with the screw holes of the cross bar.
Insert bolt (G) into each hole,
Once the screws are in place, tighten the screw until firmly attached with the
allen-wrench (F) provided.
Product Assembly Instructions
Item # LCMUDRGR NOT PROVIDED
A: Chest x 1 B: Leg x 2
A
B
F
C
E
D
F
G
Step 3: Align the screw holes of handle with holes on face of drawer, insert bolt are
in place, tighten the screw until firmly attached with the screwdriver.

3
2
1
2/2
K
I
H
K
J
L
L: Anti - flip B x 2
H: Plastic anchor
I: Screw M4*20
J: Screw M4*40
K: Anti - flip A
x 4
x 4
x 4
x 4
Step 3 : Making drill holes on the wall and insert plastic anchor (H) at this hole.
Fixing anti - flip A (K) by 2 screw M4*40 (J) with screwdriver.
Once the screws are in place,tighten the screw until firmly attached.
Fixing anti - flip A (K) on back chest (A) by 2 screw M4*20 (I) with screwdriver.
Step 4 : Align the anti - flip A (K) on the wall with the anti - flip A (K) on the chest
Use the anti - flip B (L) through 2 anti - flip A to fix.
Finished
Wall
Wall
Wall