Armin Strom Edge Double Barrel User manual

INSTRUCTIONS FOR USE
EDGE DOUBLE BARREL
CALIBRE ARM16
Thank you for buying an Armin Strom watch.
Developed and manufactured in-house, the
ARM16 calibre of your watch is a self-winding
mechanical movement with a power-reserve
indicator. Its two barrels ensure an exceptional
eight-day power-reserve.
To guarantee the perfect working of your watch for
many years to come, please pay careful attention
to the recommendations for use set out in these
instructions.
HOURS MINUTES
POWER-RESERVE
INDICATOR
SECONDS

WINDING
Your manual mechanical watch must be wound
regularly for it to work properly. To do so, turn
the crown clockwise in position 1 until it locks,
which indicates that the movement is comple-
tely wound. It is important to never put strain on
the crown, since this could damage the mecha-
nism.
When fully wound, your watch has a power-re-
serve of eight days. Your watch must be wound
regularly for it to work properly.
When the power-reserve indicator (in red below)
approaches its lowest point (down), it is time to
wind your watch. Wind your watch completely un-
til the indicator reaches its maximal position (up).
Power-reserve (down)
Wind your watch.
Power-reserve (up)
Your watch is wound.

1 2
SETTING THE TIME
Pull the crown out to position 2. Adjust the
hours and minutes by turning the crown for-
wards or backwards.
Important: Always push the crown back to positi-
on 1 once the settings have been made.

ARMIN STROM AG
Bözingenstrasse 46
CH-2502 Biel/Bienne
Switzerland
Tel. [phone]
Fax [phone]
[email protected]
WWW.ARMINSTROM.COM
Facebook: www.facebook.com/arminstrom
Twitter: www.twitter.com/arminstrom
Instagram: www.instagram.com/arminstrom