Armstrong 59776 Assembly instructions
59776
Visit our website at: http://www.harborfreight.com
37"-90"
SLIM NO STUD
TV WALL MOUNT
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference. 23e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2022 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 59776
SAFETY INSTALLATION PARTS LIST
Table of Contents
Safety ........................................................................2
Specifications ............................................................3
Installation .................................................................3
Parts List....................................................................7
Warranty ....................................................................8
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
1. Do not exceed listed weight capacity. Be aware of
dynamic loading! Sudden load movement may
briefly create excess load causing product failure.
2. Verify that mounting surface has no hidden
utility lines before drilling or driving screws.
3. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
4. Inspect before installing; do not mount to wall
if parts are missing, loose or damaged.
5. Assemble and install only according to
these instructions. Improper assembly and
installation can create hazards and lead to
personal injury and property damage.
6. Keep installation area clean and well lit.
7. Do not assemble or install when tired or when
under the influence of drugs or medication.
8. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
9. Use as intended only. Use to mount
VESA compliant TV to vertical wall only. Do not
mount overhead or to non-vertical surface.
10. This product is not a toy.
Do not allow children to play with or near this item.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
13. Carefully read TV instructions before
installation. Harbor Freight Tools is not
responsible for damage caused by failure to
follow TV mounting instructions, improper
installation, or improper/loose hardware.
SAVE THESE INSTRUCTIONS.
Page 3For technical questions, please call 1-888-866-5797.Item 59776
SAFETYINSTALLATIONPARTS LIST
Specifications
Weight Capacity 100 lb Drywall - Minimum thickness of 3/8" (9.5mm)
135 lb Concrete Wall - Minimum thickness of 5.5" (140mm)
TV Size Range About 37" to 90" diagonal
VESA Compliance (in mm) 600 x 400 (Max)
Installation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT INJURY:
THIS BRACKET IS INTENDED FOR USE WITH A PRODUCT WEIGHING
NOT MORE THAN 100 POUNDS AND HAVING DIMENSIONS THAT WILL PERMIT IT TO MOUNT
EVENLY ON THIS BRACKET. (SEE INSTRUCTIONS.) USE WITH OTHER PRODUCTS MAY RESULT
IN THE COLLAPSE OF THE MOUNT AND ITS ACCESSORIES CAUSING POSSIBLE INJURY.
Mount Wall Mount
Drywall
WARNING! TO PREVENT SERIOUS INJURY:
Verify that mounting surface has no hidden
utility lines before drilling or driving screws.
1. Set Wall Mount (1) against wall at
desired height. Place Level (18) on top
of Wall Mount, adjust until level.
2. Nail Wall Mount to wall using
twenty Nails (17). Drive Nails at an angle and
through both holes on the Wall Mount. Wall
Mount (1)
Bottom
Hole
Top Hole
Nail (17)
Concrete
1. Set Wall Mount (1) against wall at desired height.
Place Level (18) on top of Wall Mount, adjust
until level. Mark location of mounting holes.
2. Using 3/8″ carbide tip masonry bit (sold separately),
drill four holes 2-3/8″ deep at marked locations.
3. Insert Wall Anchors (15) into holes, making
sure they are flush with wall surface.
Concrete
Wall Anchor (15)
2-3/8"
WARNING! TO PREVENT SERIOUS INJURY:
Wall anchors must be set firmly into concrete.
4. Use four Hex Self Tapping Screws (14)
and four D6 Washers (16) to mount
Wall Mount to wall. Use level to adjust
the Wall Mount until it is completely level
before final tightening of the Screws.
Wall Mount (1)
Hex Self Tapping
Screw (14)
D6 Washer (16)
Wall Anchor (15)
Page 4 For technical questions, please call 1-888-866-5797. Item 59776
SAFETY INSTALLATION PARTS LIST
Mount VESA Panel to TV
WARNING! TO PREVENT SERIOUS INJURY: To reduce risk of electric
shock, unplug TV before threading bolts into TV’s back panel.
NOTICE: Consult TV owner’s manual before attaching this Panel. Harbor Freight Tools is not responsible for
damage caused by failure to follow TV mounting instructions, improper installation, or improper/loose hardware.
1. Cover TV screen with a towel or other soft material
and tilt it against the wall or another solid surface.
Do not lay TV face down.
2. Consult TV Owner’s Manual to
determine TV’s VESA mounting pattern
and hardware requirements.
3. Mounting Hardware:
a. Use mounting hardware that came with the TV, or
b. If the TV did not come with mounting
hardware, select from included Bolts and
Washers (see Parts List on page 7).
WARNING! To prevent serious injury, do not use
hardware that does not match the TV’s hardware,
that is too long or too short, or overtighten
the hardware. Doing so may damage the
TV, create a shock hazard by electrifying the
hardware/mount, and/or cause the TV to fall.
4. Attach VESA Panel directly to back of TV
using appropriate hardware. Use included
Spacers between the Panel and TV as needed
to prevent Bolts from bottoming out.
Bolt
Washer
VESA
Panel
Spacers
(optional)
Page 5For technical questions, please call 1-888-866-5797.Item 59776
SAFETYINSTALLATIONPARTS LIST
TV Angle
WARNING! TO PREVENT SERIOUS INJURY: To reduce risk of electric
shock, unplug TV before threading bolts into TV’s back panel.
1. TV can rest on Wall Mount upright or at
a 5° tilt depending on hardware installed
in the bottom two VESA holes.
2. Cover TV screen with a towel or other soft material
and tilt it against the wall or another solid surface.
Do not lay TV face down.
3. Select the same Bolts, Washers, and Spacers
used to mount the VESA Panel to the TV.
4. For no tilt, use selected mounting hardware
to attach No Tilt Spacer (3) to the bottom
VESA holes. See Figure A.
5. For tilt, use selected hardware to
attach Tilt Spacer (4) to the bottom
VESA holes. See Figure B.
Bolt
Washer
No Tilt
Spacer (3)
Spacer
Bottom
VESA Hole
Figure A: No Tilt Configuration
Bolt
Washer
Tilt Spacer (4)
Spacer
Bottom
VESA Hole
Figure B: Tilt Configuration
Table of contents
Other Armstrong TV Mount manuals
