Artec Light Tower User manual

Light Tower
Assembly Instructions
is a registered trademark of Artec Co., Ltd.
in multiple countries including Japan, South Korea,
Canada, and the USA.

02
Light Tower
Contents
Studuino Unit
×1×1
USB Cable Sensor Connecting Cable
(three-wire 15 cm)
×1×8
Half C (light aqua)
×29
Basic Cube (white)
×8
Basic Cube (clear)
×4
Half B (blue)
×3
Battery Box
Buzzer Light sensor
LED (blue)LED (green) LED (white)LED (red)
Sound sensor Touch sensor
×1×1×1×1
×1×1×1×1
Half D (light blue)
×4
Buzzer
Red
Sound
Sensor
Light
Sensor
Green Blue White
Touch
Sensor

Assembly Instruction Labels
Shows an image of the
completely assembled item.
Shows the parts needed
for assembly. Indicates
the number of parts
needed for assembly.
×1
Biped Walking Robot
Indicates when the direction
of a component must be
changed for assembly.
Indicates tips or warning
when building a specific item.
03

POWERPOWER
＋－
04
Connect the cable from the battery box
to the POWER section.
Light Tower
×1
×1
Adding the Battery Box

05
Sensor Connecting Cable
Sensor side Circuit board side
Sound Sensor
1. 2.
Light Tower
×12 ×3
×1×2
×1
Assembling the Base
GrayGray
Black
Black
Make sure the cables
are inserted correctly!
①

06
1. 2.
②
③
Light Tower
GrayGray
Black
Black
Make sure the cables
are inserted correctly!
Light
Sensor

×2
07
④
⑤
Light Tower

08
⑥
Light Tower

09
Light Tower
×3×1
×1×1
Assembling the Touch Sensor
BlackBlack
Gray
Gray
Make sure the cables
are inserted correctly!
Touch
Sensor

10
①
Light Tower
×8
×1
×2
×3×3
×4
×1
×1
×1
Assembling the Center
GrayGray
Black
Black
Green
Make sure the cables
are inserted correctly!
1.
2.

11
GrayGray
Black
Black
Gray
Gray
Black
Black
②
Light Tower
Make sure the cables
are inserted correctly!
Make sure the cables
are inserted correctly!
Red
White

12
GrayGray
Black
Black
Make sure the cables
are inserted correctly!
Buzzer
③
Light Tower

13
④
Light Tower
White
Red
Buzzer

14
①
Light Tower
×6
×2×3
×1×1
×1
×1
Assembling the Top
GrayGray
Black
Black
Blue
Make sure the cables
are inserted correctly!
Make sure the LED is
inserted correctly!

15
②
Light Tower

16
①
②
A4
Connect the cable from the touch sensor to .
A4
Light Tower
Putting the Parts Together
Make sure the cables
are inserted correctly!

17
A3
A2
Blue
White
Light Tower
③
④
Connect the cable from the blue LED to and the cable from the white LED to .
A2 A3
A1 A0
Red
Green
Connect the cable from the green LED to and the cable from the red LED to .
A1 A0
Make sure the cables
are inserted correctly!
Make sure the cables
are inserted correctly!

18
A6
A5A7
Buzzer
Sound
sensor
Light
sensor
Light Tower
⑤
⑥
Connect the cable from the buzzer to , the cable from the light sensor to ,
and the cable from the sound sensor to .
A5 A6
A7
Make sure the cables
are inserted correctly!

19
Light Tower
Reverse
③

Light Tower
20
Replacing the Batteries
① ②
③ ④
⑤
Put the lid of the battery
box back in place.
Insert batteries in the
correct polarity.
Use a screwdriver
(Phillips #1) to open.