Distributor of Artesyn Embedded Technologies: Excellent Integrated System Limited
Datasheet of NLP110C - COVER FOR NLP110 SERIES PS
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 1
2 YEAR WARRANTY
NLP110 Series
Cover accessory kit
•Mount-on cover
•Easy to install
•No additional screws needed
•Complies with UL and VDE safety standards *
•Mounting bracket kit also available
The NLP110 series is available with a mount-on cover accessory kit to facilitate
flexible customer installation. The mount-on cover installation is independent of
the power supply mounting position thus offering various mounting options to
the customer and comes complete with mounting and grounding screws plus
an insulator. The cover is installed directly to the power supply PCB allowing
the power supply to be mounted either on the NLP110 mounting bracket or on
the customer’s system chassis. The mounting bracket and cover kit are sold as
separate items to retain their inherent flexibility. Details of the mounting bracket
assembly kit are available on our website. The NLP110 mount-on cover is
flexible, easy to install and is suitable for applications that require power supply
installation options with minimum mechanical work for the system designer.
SNAP-ON COVER KIT
Mounting Screw
(#6-32x3/16, P/N 6050111-0000, 4)
COVER (P/N 7610105-0000)
NLP110 POWER SUPPLY
INSULATOR (P/N 6210097-00)
CUSTOMER CHASSIS
MOUNTING FEATURE
(STANDOFF, #6-32 THREAD)
ALL DIMENSIONS IN INCHES (MM)
6.83 (173.48)
3.36 (85.34)
1.40 (35.56)
Customer Ground Screw
(#6-32x3/16, P/N 6050111-0000)
Data Sheet © Artesyn Technologies
®
2002
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: NLP110C.PDF Rev: 06 Mar 2000
MODEL NUMBER: NLP110C
Materials
1Cover
1Insulator
4Mounting screws #6-32 x 3/16 inch
1Installation instructions
Assembly Notes
1Before assembly, ensure unit was turned off for at least 10 minutes.
2Ensure that the insulator is correctly fitted in the customer chassis under
the PCB to maintain safety creepage and clearances.
3Position the power supply onto the customer chassis aligning the PCB
assembly mounting holes with the 4 stand-offs on the chassis. Orientation
of PCB assembly relative to the chassis must be as shown in the drawing
opposite.
4Put the cover on the PCB with orientation as shown in the drawing
opposite.
5Secure both the cover and the power supply with 4 screws through the
holes as shown on the drawing opposite.
6‘Earth’* grounding can be:
(a) Through system chassis when system chasiss connected to the ‘earth’.
(b) Through power supply cover. Connect ‘earth’to cover as shown on
drawing opposite.
7When a cover or other sheetmetal option is added, it is the user’s
responsibility to ensure that the requirements of the relevant safety agency,
or agencies, are complied with.
* When installed follow the ‘installation instructions’.
Powered by TCPDF (www.tcpdf.org)
Powered by TCPDF (www.tcpdf.org) 2 / 2
2 / 2
