Article LENIA SKU14429 User manual

Assembly Instructions
LENIA
Sideboard
VERSION 1.2

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
LENIA Sideboard Page 2 of 5
20 min
3
PARTS INVENTORY
ID DESCRIPTION QTY
LEFT LEG 1
RIGHT LEG 1
CROSSBAR 1
SHELF 2
FELT PAD 4
COMPRESSION FITTING
ANCHOR 2
ALLEN KEY 1
M8 ×8MM SCREW 2
M8 ×15MM BOLT 8
SHELF PIN 8
TIME # OF PEOPLE DIFFICULTY
REQUIRED TOOL
ANTI-TIP
Installation Required

Page 3 of 5
2
1
× 4× 4
LENIA Sideboard
× 2

Page 4 of 5
4
3
LENIA Sideboard
× 8
Crossbar is situated at the
front side of the sideboard.
!
× 2

Page 5 of 5
5B
5A
LENIA Sideboard
× 4
× 4
Insert shelf pins (J) on left side
and secure shelves (D) on pins.
Next insert shelf pins (J) on right
side and secure shelves (D) on pins.
!
!

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 × 17MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
CABINET Anti-Tip Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2

Page 2 of 3
12
3
Attach pair of brackets to top
corners of the back of the unit.
Mark on wall where second pair
of brackets should be placed.
× 4
× 4× 4 × 4
× 2
CABINET Anti-Tip Installation
Drill holes in wall using
8mm / 5/16"drill bit.

Page 3 of 3
4A
4B
Align brackets on unit
with brackets on wall.
CABINET Anti-Tip Installation
Pull strap down until it snap-locks.
× 2 × 2

SOFT CLOSING DOORS –LENIA / NERA
ADJUSTMENT INSTRUCTIONS
If the door is crooked, adjust hinge(s) up or down:
During shipping, the doors of your cabinet may have
shifted slightly. This can easily be corrected by tightening
a few screws. Always start by adjusting the top hinge on
the aected door.
REQUIRED TOOL
FIX A CROOKED DOOR
!

If the door needs adjustment forward or backward:
If the door needs adjustment side to side:
SIDEWAYS ADJUSTMENT
DEPTH ADJUSTMENT
!
If you’re having diculty, our friendly Customer Care team is
always here to help. Call us at 1.888.746.3455 during business
hours, email [email protected] or chat live at article.com.
!