Article LENIA User manual

Assembly Instructions
LENIA
6 Drawer Double Dresser
VERSION 1.3

Page 2 of 4
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
LENIA 6 Drawer Double Dresser
20 min
3
PARTS INVENTORY
ID DESCRIPTION QTY
LEFT LEG 1
RIGHT LEG 1
CROSSBAR 1
FELT PAD 4
COMPRESSION FITTING
ANCHOR 2
M8 × 8MM SCREW 2
M8 × 15MM BOLT 8
ALLEN KEY 1
TIME# OFPEOPLE DIFFICULTY
REQUIRED TOOL
ANTI-TIP
Installation Required

Page 3 of 4
2
1
× 4
× 2
× 4
LENIA 6 Drawer Double Dresser

Page 4 of 4
4
3
LENIA 6 Drawer Double Dresser
× 2
× 8
Crossbar is situated at
the front side of the dresser.
!

ANTI-TIPInstallationPage 1of 3
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OFPEOPLE DIFFICULTY
To prevent injury and property damage from unexpected
tipping of furniture, we highly recommend installation of
the anti-tip kit included with this product.
1010 Raymur Ave.
Vancouver, BC V6A 3T2
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
ANTI-TIP RESTRAINT INSTALLATION
WARNING!
PARTS INVENTORY
ID DESCRIPTION QTY
M8 × 51MM PLUG 4
MOUNTINGPLATE 4
NYLON STRAP 2
M4 × 17MM SCREW 4
• Determine where the piece is to be placed
and mark location on the wall for the
mounting bracket screw holes. They should
be placed approximately below the top on
the back piece of furniture.
• Drill the hole and use the appropriate
wall plug that is suitable for your walls
composition.
• Attach the mounting bracket vertically to the
wall using appropriate fastener, through the
holes in the bracket and 2 wall plugs that
are suitable to your walland then tighten
securely.
• Next using the short screws attach the
2nd bracket to the back of the piece of
furniture’s top.
• Lace the nylon strap down through the
brackets. Slide the thin end of the strap
through the receivnhg end on the nylon
strap. Pull to tighten the piece of furniture
snug against the wall.
Attaching furniture to wall
with anti-tip kits:
M6 × 70MM SCREW 4

ANTI-TIP Installation Page of 3
1
× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.
Before drilling check wall for
hidden pipes and cables.
!
If fixing to wood make sure
that is is not chipboard as
screws can easily pull away
from the core structure.
Use an appropriate wall
plug provided you are sure
your wall is sound.
Special toggle wall
plugs are needed.
Seek expert advice.
Wood Brick or Masonry Cavity Wall
× 4
2

Page 3 of 3
ANTI-TIP Installation
CARE INSTRUCTIONS :
1. Hardware may loosen overtime.
Periodically check that all connections
are tight and re-tighten as necessary.
2. Wipe with a soft, dry cloth. To protect
finish, avoid the use of chemicals and
household cleaner.
Pull strap down until it snap-locks.
× 2

LENIA Soft Close Drawer
Adjustment InstructionsPage 1 of 3
FIXED A CROOKED DRAWER
SOFT CLOSING DRAWERS
ADJUSTMENT INSTRUCTIONS
Structural integrity is warranted only if all
fasteners are properly installed & tightened,
and the bed is moved only per instructions.
×2
Adjust levelers on either side of drawer
as needed to straighten drawer.
!

LENIA Soft Close Drawer
Adjustment InstructionsPage 2 of 3
REMOVE DRAWER
1
×2
To unlock.
2

LENIA Soft Close Drawer
Adjustment Instructions Page 3 of 3
INSTALL DRAWER
1
2
×2
To lock.
×2
×2