Article TAIGA User manual

Assembly Instructions
TAIGA
5 Drawer Dresser
VERSION 1.0

TAIGA 5 Drawer Dresser Page 2 of 3
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
LEGS 2
FELT PAD 4
WRENCH 1
M8 ×25MM BOLT 8
LOCK WASHER 8
WASHER 8
TIME # OF PEOPLE DIFFICULTY
REQUIRED TOOL
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
ANTI-TIP
Installation Required

1
2
TAIGA 5 Drawer Dresser Page 3 of 4
× 2
× 8

3
TAIGA 5 Drawer Dresser Page 4 of 4
× 20
× 20
Unscrew all screws
on drawer handles.
!
Flip drawer handles over
and reattach with screws.
!

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Place heaviest items in the lower drawers.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
• Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
ANTI-TIP Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

Page 2 of 3
12
3
Attach pair of brackets to top
corners of the back of the unit.
ANTI-TIP Installation
× 4
Mark on wall where second pair
of brackets should be placed.
× 2
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.

Page 3 of 3
4A
4B
Align brackets on unit
with brackets on wall.
Pull strap down until it snap-locks.
ANTI-TIP Installation
× 2 × 2