Article CANDRA 16784 User manual

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
CANDRA Sideboard
Anti-Tip Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
VERSION 1.3

Page 2 of 3
12
3
Attach pair of brackets to top corners
of the back of the unit. Note there are
no existing pilot holes on the product.
Mark on wall where second pair
of brackets should be placed.
× 4
× 4× 4 × 4
× 2
Drill holes in wall using
8mm / 5/16"drill bit.
CANDRA Sideboard
Anti-Tip Installation

Page 3 of 3
4A
4B
Align brackets on unit
with brackets on wall.
Pull strap down until it snap-locks.
× 2 × 2
CANDRA Sideboard
Anti-Tip Installation