Article MAYA User manual

Assembly Instructions
MAYA
Sideboard
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Page 2 of 7MAYA Sideboard
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
SIDEBOARD 1
LEG FRAME 2
CROSS BAR 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 1
M6 ×15MM BOLT 18
M6 ×35MM BOLT 4
LOCK WASHER 22
WASHER 22
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required
REQUIRED TOOL

#
#
Page 3 of 7MAYA Sideboard
1
×4
×18
Do not fully tighten bolts until
all bolts are placed properly.
!
80%

#
Page 4 of 7MAYA Sideboard
2
Adjust levelers as needed.
!
Fully tighten bolts.
!
100%

Page 5 of 7MAYA Sideboard
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
During shipping, the doors of your cabinet may have
shifted slightly. This can easily be corrected by tightening
a few screws. Always start by adjusting the top hinge on

#
#
Page 6 of 7MAYA Sideboard
12
3
×2×4
Mark on wall where second pair
of brackets should be placed.
Attach pair of brackets to top
corners of the back of the unit.
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.

#
#
Page 7 of 7MAYA Sideboard
4A
4B
Align brackets on unit
with brackets on wall.
×2×2
Pull strap down until it snap-locks.