Article ENVELO User manual

Assembly Instructions
ENVELO
Sideboard
VERSION 1.0
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [e-mail] or chat
live at article.com.
ENVELO Sideboard Page 2 of 4
20 min
2
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [e-mail] or chat
live at article.com.
PARTS INVENTORY
ID DESCRIPTION QTY
LEGS 4
LEFT SHELF 1
RIGHT SHELF 1
M6 WASHER 16
M6 LOCK WASHER 16
M6 ×20MM BOLT 16
ALLEN KEY 1
SHELF PIN 8
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required
All manuals and user guides at all-guides.com

#
Page 3 of 4
1
2A
ENVELO Sideboard
Insert shelf pins (H)
at desired height.
!
× 16
× 8
All manuals and user guides at all-guides.com

Page 4 of 4
2B
3
ENVELO Sideboard
Adjust levelers on
legs as needed.
!× 4
All manuals and user guides at all-guides.com

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
CABINET Anti-Tip Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
All manuals and user guides at all-guides.com

Page 2 of 3
12
3
Attach pair of brackets to top
corners of the back of the unit.
Mark on wall where second pair
of brackets should be placed.
× 4
× 4× 4 × 4
× 2
CABINET Anti-Tip Installation
Drill holes in wall using
8mm / 5/16"drill bit.
All manuals and user guides at all-guides.com

Page 3 of 3
4A
4B
Align brackets on unit
with brackets on wall.
CABINET Anti-Tip Installation
Pull strap down until it snap-locks.
× 2 × 2
All manuals and user guides at all-guides.com