Article COTU User manual

Assembly Instructions
COTU
Bar Cabinet
VERSION 1.0

Page 2 of 12
COTU Bar Cabinet
PARTS INVENTORY
ID DESCRIPTION QTY
CABINET 1
CABINET SHELF 2
LEG 1 1
LEG 2 1
BOTTOM SHELF 1
BACK FRAME 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 1
M6 ×45MM BOLT 14
CRESCENT WASHER 10
M6 LOCK 4
M6 WASHER 4
SHELF PIN 8
M4 ×20MM BOLT 2
HANDLE 2
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
30 min
3
TIME # OF PEOPLE DIFFICULTY

#
Page 3 of 12
COTU Bar Cabinet

#
Page 4 of 12
COTU Bar Cabinet
1
×2 ×4

Page 5 of 12
COTU Bar Cabinet
3
2
× 4
× 4

#
#
Page 6 of 12
COTU Bar Cabinet
4
5
×2
×8

#
#
Page 7 of 12
COTU Bar Cabinet
6
7
Adjust levelers as needed.
!

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
ANTI-TIP RESTRAINT INSTALLATION
CABINET Anti-Tip Installation
WARNING!
1010 Raymur Ave.
Vancouver, BC V6A 3T2
Page 8 of 12
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
REQUIRED TOOL
8MM / 5/16" DRILL BIT
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

#
Page 9 of 12
COTU Bar Cabinet
1
2
Drill holes into drywall, in wall
using 8mm 5/16" drill bit.
× 4× 4× 4
Attach pair of brackets to top
corners of the back of the unit.
×4
Mark on wall where second pair
of brackets should be placed.
×2

#
Page 10 of 12
COTU Bar Cabinet
3

CABINET Door Adjustment Page 11 of 12
During shipping, the doors of your cabinet may have
shifted slightly. This can easily be corrected by tightening
a few screws. Always start by adjusting the top hinge on
the aected door.
REQUIRED TOOL
DOOR ADJUSTMENT INSTRUCTIONS
#
1

#
#
Page 12 of 12
COTU Bar Cabinet
#
#
2
3