Artison STUDIO BG Series User manual

Artison Studio Soundbar Quick Start Guide | 009-1968-01 45 Perseverance Way, Hyannis, MA 02601
Copyright 2021 Savant Systems, Inc | 211102 1 of 2 www.savant.com/artisonspeakers | 508.683.2500
Artison Studio Soundbars [STUDIOxx-BG] Quick Start Guide
Products Specific Contents
Studio 39 [Studio39-BG]
(1) Soundbar (093-3229-xx)
(1) Standard Grille (093-3228-xx)
Studio 46 [Studio46-BG]
(1) Soundbar (093-3230-xx)
(1) Standard Grille (093-3225-xx)
Studio 55 [Studio55-BG]
(1) Soundbar (093-3231-xx)
(1) Standard Grille (093-3226-xx)
Studio 65 [Studio65-BG]
(1) Soundbar (093-3232-xx)
(1) Standard Grille (093-3227-xx)
Universal Box Contents
(1) Install Kit (075-0256-xx)
(1) Pair of White Gloves (099-0348-xx)
(2) Wall Mounting Bracket (071-1130-xx)
(1) 3mm Allen Wrench (015-0222-xx)
(8) M5x10mm hex screw (039-0440-xx)
(4) 25mm Washer 5mm ID (039-0437-xx)
(2) 50x90 Bracket Extension (071-1112-xx)
(2) 70x90 Bracket Extension (071-1113-xx)
(2) Plastic Feet (073-1030-xx)
(2) Rubber Pads for Feet (073-0014-xx)
(1) Product Regulatory Insert (009-1967-xx)
(1) Quick Start Guide (this document)
Specifications
Environmental
Temperature 32° to 104° F (0° to 40°C)
Humidity 10% to 90% (non-condensing)
Dimensions and Weights
Height 4.67 in (11.87 cm) with grille
Width STUDIO39 with grille 38.0” (96.52cm)
STUDIO46 with grille 45.4” (11.53cm)
STUDIO55 with grille 54.1” (137.41cm)
STUDIO65 with grille 65.5” (166.37cm)
Depth 2.77 in (7.04 cm) with grille
Shipping Weight STUDIO39 16.5 lbs (7.48 kg)
STUDIO46 21.0 lbs (9.53 kg)
STUDIO55 23.5 lbs (10.66 kg)
STUDIO65 31.0 lbs (14.06 kg)
Operating Parameters
Frequency
Response
80 Hz - 40 kHz +/- 3 dB
Sensitivity 89 dB @ 2.83V/1 meter
Regulatory
RoHS Compliant
Optional Accessories (sold separately)
–Soundbar TV Mount Hardware
(MNT-STUDIO-TV-xx)
–Custom Grilles matched to Flat Panel TV’s
Front Panel
STUDIO39-BG
BA
A
Front Tweeters (3) 25 mm Vifa XT Super Audio Tweeters
- STUDIO55/65-BG
(3) 25 mm Vifa DX Super Audio Tweeters
- STUDIO39/46-BG
B
Midrange/
Woofers
(4/6/8) 89 mm Long Throw Carbon Fiber
Midrange/Woofers
Side and Bottom Panel
A
B
AStage Tweeters (2) 19mm Silk Tweeters
BMounting Slide (2) Captive M5 threaded bracket

Artison Studio Soundbar Quick Start Guide | 009-1968-01 45 Perseverance Way, Hyannis, MA 02601
Copyright 2021 Savant Systems, Inc | 211102 2 of 2 www.savant.com/artisonspeakers | 508.683.2500
Installation
Wall Mount
1. Using appropriate fasteners to support the weight of the soundbar,
ax wall mounting brackets to the wall, allowing sucient space
between brackets to ensure stability.
2. If utilizing the included bracket extensions, connect to wall
mounting brackets using M5x10mm screws.
3. Make all wiring connections to soundbar before mounting to
brackets.
4. Align the captive M5 threaded brackets inside soundbar mounting
slide with position of wall mounting brackets.
5. Attach soundbar by threading M5x10mm screws through wall
brackets and into the soundbar’s captive mounting slide brackets.
Plastic Feet
1. Align the captive M5 threaded brackets in the soundbar mounting
slide beneath the center speakers of right and left side channels.
2. Secure plastic feet to the captive brackets using M5x10mm screws.
3. Remove wax paper from the adhesive backing on included rubber
pads and attach one to each of the plastic feet.
Rear Panel
Speaker Wire Terminals - (6) terminals accepts speaker wire with a
minimum of 16 AWG and a maximum of 12 AWG.
Wiring
The Studio Soundbars require a multi channel amplifier. They use
three discrete channels (Left, Center, and Right). Terminals are noted
positive and negative. When using TV mounting hardware the Left
and Right terminals can switch on the Soundbar based on if it’s be
mounted above or below a TV.
1. Strip 3/8” (9 mm) of the casing of the speaker wire.
2. Depress speaker wire terminal.
2
3
3. Insert bare wire.
4. Release speaker wire terminal.
5. Repeat steps 1 to 4 for each connection.