Artistic Licence moody cvz1 User manual

Artistic Licence
moody cvz1 Quick Start Guide Version 2-0
moody cvz1
Quick Start Guide
The full User Guide can be downloaded via the QR code

Programming (moody cvz1)
To enter programming mode, press and hold control for 3 seconds.
Step 1
moody’s indicator LED ashes red to acknowledge it has entered
colour programming mode, then shows the colour of the xture.
Step 2 - programme the colour (hue)
a) Wait 5 seconds; moody will start slowly cycling through the colour
palette. When you see the colour you want, briey press the
control.
N.B. During the programming process, the xture will change
colour to show the e󰀨ect of your programming.
b) Alternatively, rotate the control clockwise or counter-clockwise to
move forwards or backwards through the colour palette. When
you see the colour you want, briey press the control.
Operation (moody cvz1)
Overview
ymoody cvz1
- Controls a single RGB xture with CV dimmer output at 12 - 24V
- Output is RGB common anode
- Wheel controls xture colour
From factory, all scene channels are programmed to cyan. At power on, moody will automatically
fade the master level to full over 5 seconds.
If lights are on, briey press the control: moody fades the master level to zero over 5 seconds.
If lights are o󰀨, briey press the control: moody fades the master level to full over 5 seconds.
Rotate control clockwise or counter-clockwise to change the colour of the xture. The LED
indictor shows the master level (always 100%) and colour of the xture.
To set a scene: please see programming instructions below.

moody’s indicator LED ashes white to acknowledge it has entered
white level programming mode, then displays the white level of the
xture.
Step 3 - programme the white level
N.B. In moody cvz1, the white level is really saturation - it controls
the amount of white that is mixed in with the colour and allows
shades to be created.
b) Alternatively, rotate the control clockwise or counter-clockwise
to increase or decrease the white level. When you see the white
level you want, briey press the control.
a) Wait 5 seconds; moody will start slowly cycling through the white
levels. When you see the white level you want, briey press the
control.
moody displays the master level (100%) and colour of the xture. It
is now in normal operating mode.
Step 5 (end)
Programming of the xture is now complete. Press and hold
the control for 3 seconds to exit programming mode. moody
acknowledges by ashing green.
Step 4 - exit programming mode

Due to our policy of continuing product improvement
specications are subject to change without notice
Artistic Licence
The Mould Making Workshop
Soby Mews
Bovey Tracey
TQ13 9JG
United Kingdom
Telephone [phone]
Email: [e-mail]
Web: www.ArtisticLicence.com
[e-mail]