Artistic Licence moody cvi1 User manual

Artistic Licence
moody cvi1 Quick Start Guide Version 2-0
moody cvi1
Quick Start Guide
The full User Guide can be downloaded via the QR code

Operation (moody cvi1)
From factory, the scene channel is programmed to full. At power on, moody i will automatically
fade the master level to full over 5 seconds.
If the lights are on, briey press the control: moody fades the master level to zero over 5 seconds.
If lights are o󰀨, briey press the control: moody fades the master level to the previously used
setting over 5 seconds.
Rotate control clockwise to increase master level. Rotate control counter-clockwise to reduce
master level. The LED indictor shows the master level.
To set a scene: please see programming instructions below.
Overview
ymoody cvi1
- Controls a single intensity channel with CV dimmer output at 12 - 24 VDC (5A total)
- Wheel controls intensity
Connections
Outputs are labelled Red, Green and Blue. Connect the negative terminal of your LED lamp to
the Red terminal, and the positive to the terminal marked ‘+ VDC’.

moody displays the master level and is now in normal operating mode.
Step 5 (end)
Programming (moody cvi1)
Rotate clockwise to increase intensity.
Rotate counter-clockwise to decrease intensity.
Step 3 - set the intensity
-+
To enter programming mode, press and hold control for 3 seconds.
Step 1
moody’s indicator LED ashes white to acknowledge it has entered
intensity programming mode, then shows the intensity of the channel.
Step 2
Press and hold control for 3 seconds to exit programming mode. moody
acknowledges by ashing green.
Step 4 - exit programming mode

Due to our policy of continuing product improvement
specications are subject to change without notice
Artistic Licence
The Mould Making Workshop
Soby Mews
Bovey Tracey
TQ13 9JG
United Kingdom
Telephone [phone]
Email: [e-mail]
Web: www.ArtisticLicence.com
[e-mail]