Artnix ANX-16120 User manual

1
W
ARNING
This symbol is intended to alert the user to the presence of unprotected
“Dangerous voltage" within the product's enclosure that may be strong
enough to cause a risk of electric shock.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
NOTE: This equipment has been tested and found to comply with the limits for a class
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Disposal of Old Electical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office , your household waste disposal service or the shop where you
purchased the product.

2
PRECAUTION
• Make sure to switch the power off before you install the DVR.
• There is the danger of an electric shock if the DVR is opened by an unqualified service
engineer or installer.
• Avoid using the DVR outside of the reference temperature and humidity indicated in the
specification.
• Avoid exposing the DVR to violent movement or vibration.
• Do not use or store the DVR in direct sunlight or near to any source of heat.
• Do not place any object into the holes used for air circulation.
• Before connecting the power cord, please select the correct voltage for local use. You may
switch between 230VAC and 115VAC.
• Always use the DVR in a well ventilated location to prevent overheating.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• When the system is overheated, the below warning message will be displayed
at the monitor.
“ SYSTEM IS OVERHEATED, TURN THE POWER OFF AND CHECK COOLING FAN”
In this case, do the power off right away and check the cooling fan working.
• The HDD is recommended to use enhanced IDE Hard Disc Drive type made by
Samsung Electronics, Western Digital, Hitachi and IBM.
EXTERNAL HDD BAY (If specified as an accessory)
• Always attach the joining cable lead between the DVR and the HDD Bay for correct system
management. (Refer to the section describing the installation procedure for the EXTERNAL
HDD BAY)
• While the EXTERNAL HDD BAY is in operation never disconnect the power or connecting
cable. Before opening the top cover, you must turn off the power by the switch on the front
panel of the DVR. And then disconnect the power cord and other cables. Failure to follow
this procedure will result in lost data or malfunction of the system.
• When replacing any HDD always make certain that the replacement part is fitted in the same
place and with the same connections as the original.
All the safety and operating instructions must be read before the unit is operated.

3
CONTENTS
1. FEATURE LIST ----------------------------------------------------------------------------------
2. PACKING DETAIL ------------------------------------------------------------------------------------------
3. LOCATION AND CONTROL -----------------------------------------------------------------
3.1 FRONT PANEL CONTROLS -------------------------------------------------------------------------------
3.2 REAR PANEL CONNECTORS -----------------------------------------------------------------------------
4. INSTALLATION ---------------------------------------------------------------------------------------------
4.1 TOTAL CONNECTION LAY-OUT -------------------------------------------------------------------------
4.2 INDIVIDUAL CONNECTION --------------------------------------------------------------------------------
4.2.1 RACK MOUNT -----------------------------------------------------------------------------------
4.2.2 CAMERA ------------------------------------------------------------------------------------------
4.2.3 AUDIO ---------------------------------------------------------------------------------------------
4.2.4 MONITOR -----------------------------------------------------------------------------------------------
4.2.5 POWER --------------------------------------------------------------------------------------------
4.2.6 EXTERNAL HDD BAY--------------------------------------------------------------------------
4.2.7 USB 2.0 Port -----------------------------------------------------------------------------------
5. OPERATION --------------------------------------------------------------------------------------
5.1 FACTORY DEFAULT ----------------------------------------------------------------------------
5.2 FRONT PANEL CONTROLS ------------------------------------------------------------------------
5.2.1 POWER ON / OFF ---------------------------------------------------------------------
5.2.2 SCREEN DISPLAY ------------------------------------------------------------------------------
5.2.3 RECORD ---------------------------------------------------------------------------------------
5.2.4 SEARCH & PLAYBACK ------------------------------------------------------------------
5.2.5 SEARCH BUTTON INFORMATION ---------------------------------------------------------
5.2.6 JOG SHUTTLE INFORMATION --------------------------------------------------------------
5.2.7DIGITAL ZOOM------------------------------------------------------------------------------------
5.2.8 SCREEN SELECT(LV/PB)------------- ---------------------------------------------------------
5.2.9 SPOT MONITOR-----------------------------------------------------------------------------------
5.2.10 COPY ----------------------------------------------------------------------------------------------
5.2.11 DVR STATUS ------------------------------------------------------------------------------------
5.2.12 PTZ CONTROL------------------------------------------------------------------------------------
5.2.13 FUNCTION BUTTON ---------------------------------------------------------------------------
5.2.14 PIP CONTROL -------------------------------------------------------------------------------
5.2 REMOTE CONTROLLER------------------------------------------------------------------------
5.3 MOUSE CONTROL -------------------------------------------------------------------------------
6. SETUP MENU ------------------------------------------------------------------------------------------------------
6.1 QUICK SETUP -----------------------------------------------------------------------------------------------
6.2 SCREEN ------------------------------------------------------------------------------------------------------
6.3 RECORD ---------------------------------------------------------------------------------------------------
6.4 EVENT ---------------------------------------------------------------------------------------------------------
6.5 SYSTEM ------------------------------------------------------------------------------------------------------
6.6 LINK -------------------------------------------------------------------------------------------------------------
6.7 SEARCH ------------------------------------------------------------------------------------------------------
6.8 COPY -------------------------------------------------------------------------------------------------------------
6.9 EXIT -------------------------------------------------------------------------------------------------------------
5
7
8
8
9
10
10
11
11
11
12
13
13
14
15
16
16
19
19
19
21
21
25
27
27
28
28
29
33
33
35
35
36
37
37
37
39
47
55
59
67
70
70
71

4
CONTENTS
7. EXTERNAL TERMINAL INFORMATION -------------------------------------------------
7.1~2 RS-422/485 / T.ADJ-------------------------------------------------------------------------------------
7.3~4 RELAYOUT / ALARM ------------------------------------------------------------------------------------
7.5~6 VGA / SERIAL -----------------------------------------------------------------------------------------
7.7~8 ETHERNET/USB / REMOTE ----------------------------------------------------------------------
8. SPECIFICATIONS --------------------------------------------------------------------------
9. 256 CAMERA INTEGRATION SYSTEM --------------------------------------------------
10. HDD INSTALLATION ------------------------------------------------------------------------
10.1 INTERNAL HDD INSTALLATION ------------------------------------------------------------------
10.2 DVD±RW (or CD-RW)INSTALLATION --------------------------------------------------------------
JUMPER SETTING INFORMATION --------------------------------------------------------
11. NETWORK CLIENT VIEWER MANUAL----------------------------------------------
11.1 INSTALLATION OF NETWORK VIEWER SOFTWARE -------------------------------------------
11.1.1 SYSTEM REQUIREMENT ---------------------------------------------------------------------
11.1.2 NETWORK ENVIRONMENT ------------------------------------------------------------------
11.1.3 INSTALLATION -----------------------------------------------------------------------------------
11.2 CONNECTING TO DVR ---------------------------------------------------------------------------------
11.2.1 ADD A NEW SITE INFORMATION --------------------------------------------------------
11.2.2 CHANGE THE SITE INFORMATION ------------------------------------------------------
11.2.3 DELETE THE SITE INFORMATION -------------------------------------------------------
11.2.4 CONNECT TO A DVR ----------------------------------------------------------------------
11.3 DVR SEARCH ---------------------------------------------------------------------------------------------
11.4 HDD SEARCH ----------------------------- ----------------------------------------------------------------
11.5 FILE SEARCH -----------------------------------------------------------------------------------------------
11.6 ARRANGE THE SCREEN ------------------------------------------------------------------------------
11.7 OPTION ---------------------------------------------------------------------------------------------------------
11.8 CONTROL---------------------------------------------------------------------------------------------------
11.9 KEY INFORMATION -----------------------------------------------------------------------------------
72
72
73
74
75
76
79
80
80
83
85
86
86
86
86
86
86
87
87
87
87
88
88
89
89
90
91
97

5
FEATURES
Chapter 1 Features
Operation
Playback, recording, backup and transmission simultaneously
Real time single or multi-screen display
7Pan & Tilt, 2X/4X digital zoom and PIP display
Easy operation by Jog shuttle, IR remote controller, external keypad controller and
USB 2.0 Mouse
Hidden camera option (covert)
User-friendly setup menu and operation
Playback
Multi-screen playback (Full, Quad, 9/16 split)
Search by date, time and camera
Preview window on event search mode
Playback mode(frame/ field) setup automatically
Recording
Select of the recording quality grade for each channel
Individual camera frame rate can be set by user
The recording speed of max.120 images per second (NTSC)
Manual, schedule and event recording
Pre & Post-alarm recording
Select of the recording image size for each channel
4 channels audio recording
Select of the event mode for each channel
ANX-16480 : The recording speed of max.480 images per second (NTSC)
8 channels audio recording
Network
Live and playback viewing
Remote control on a networked PC with the exclusive client viewer
(The viewer software is supplied for free.)
Flexible connections - 10/ 100 Mbps Ethernet/ ADSL
Up to 16 network users access simultaneously
Audio transmission between DVR and Client
Dynamic IP is available

6
FEATURES
External storage
Automatic backup to selected backup HDD (Event backup/ Mirroring)
Own external storage device to extend the HDD capacity
You can install 10 HDDs in 1 external HDD Bay and connect up to 4 Bay with this DVR.
(250GB X 40HDDs = 10TB, 500GB X 40HDD = 20TB, 1TB X 40HDD = 40TB)
Audio
4 channels audio recording in real time
ANX-16480 : 8 channels audio recording in real time
Audio channel select for each channel
Copy
USB 2.0 external HDD
USB 2.0 memory stick
CD-RW/ DVD±RW (option)
General
Software downloading facility via network and USB memory stick
Auto detection of PAL / NTSC
Built-in hardware Watchdog
Automatic time adjustment through Network
VGA output for PC monitor
Optional CDRW or DVD±RW
Loop-through connections
Support of multiple Languages
Graphic User Interface for the MENU screen
Digital Spot to support OSD and not to roll off

7
PACKING DETAIL
Chapter 2 Packing Detail
4. Remote controller (Option)
3. User’s Manual
1. DVR
2. Network Viewer Program CD
5. R-HDD Rack Key 7. Power Cord6 Rack Mount
9. HDD Screw
8. Battery
1. DVR
2. Network Viewer Program CD
3. User’s Manual
4. Remote Controller (Option)
5. R-HDD Rack Key
6. Rack Mount
7. Power Cord
8. Batteries (For Remote Controller)
9. HDD Screws
CONTENTS

8
LOCATION AND CONTROL
Chapter 3 Location and Control
3.1 FRONT PANEL CONTROLS
Control keys Description
○
1POWER Switch to turn the power on / off
○
2R.HDD RACK Removable HDD rack (Option: Built-in CD-RW or DVD±RW)
○
3VIDEO/AUDIO OUTPUT Video and audio output for the monitor
○
4USB port USB 2.0 port to use a USB memory stick, Mouse or USB external devices
○
5Remote Sensor Input sensor for the remote controller
⑥FUNCTION Using this button when you select “USER” in Relay 4
○
7CHANNEL SELECT Buttons to select the camera or input the password
○
8LED Display Display of the status of power(STANDBY), HDD(HDD) and network(RX / TX)
○
9MULTI Multi-channel select button
○
10 SPOT / ESC Button to control spot monitor/ return to the previous menu
○
11 MENU / Button to display the setup menu/ move to the upper direction/ TILT up in PTZ mode
○
12 LV / PB Button to convert the screen into real view mode or into playback mode
○
13 ALARM RESET / Button to release the event signal/ move the left direction/ PAN left in PTZ mode
○
14 AUTO / F / ( - ) Button to begin the auto sequence mode/ decrease the value/ focus in PTZ mode
⑮/ STATUS/ ( HOME ) Button to enter the next step/ display the status/ return to home position in PTZ mode
○
16 PIP / Button to control PIP function/ move to the lower direction/ TILT down in PTZ mode
○
17 D-ZOOM / Button to control the digital zoom/ move to the right direction/ PAN right in PTZ mode
○
18 FREEZE / F / ( + ) Button freeze image/ increase the value/ focus in PTZ mode
○
19 REC( ) Button to begin and stop recording
○
20 SLOW( ) Button to slow down the playback speed
○
21 PB / PAUSE( ) Button to start the playback. If press again, a still picture is displayed during playback.
○
22 FAST( ) Button to speed up the playback speed
○
23 DIRECTION( ) Button to change the direction of playback
○
24 SEARCH(PRESET) Button to display the search menu/ preset in PTZ mode
○
25 PTZ Button to control PTZ camera
○
26 COPY(AF) Button to display the copy menu/ automatically focus in PTZ mode
○
27 JOG SHUTTLE To make easy search in playback and menu setup/ control the playback speed/
control the zoom of PTZ camera
○
1○
7○
10
○
3○ 5○ 6○ 11 ○
12 ○
20 ○
23
○
21 ○ 22○ 19
○
4
○
2○ 8○ 9○ 14
○
13 ○ 15 ○ 16 ○
17 ○
18 ○
24 ○ 25 ○ 26 ○ 27

9
LOCATION AND CONTROL
3.2 REAR PANEL CONNECTORS
Port Name Description
○
1CAMERA IN BNC input ports for cameras
○
2CAMERA OUT BNC output(looping) ports for cameras
○
3SPOT IN BNC input port for spot monitor(Not used in all DVR models)
○
4SPOT OUT BNC output port for spot monitor
○
5AUDIO IN RCA input ports for an audio signal(4CH Line input)
○
6AUDIO OUT RCA output port for an audio signal
○
7VIDEO OUT BNC output port for the main monitor
(Same as the RCA video output of the front panel)
○
8S-VIDEO OUT Output port for the S-video output
○
9VGA OUT Output port for the VGA monitor
This DVR is compatible with TFT LCD monitor in PAL mode.
○
10 SERIAL Connector for debugging. This DVR can be controlled by the other device
through this connector(RS-232C).
○
11 422 / 485 Switch to convert into RS-422 or RS-485
○
12 TERM ON / OFF Switch to use the terminal block connectors of RS-422 or RS-485
○
13 RS-422 / 485 Terminal blocks of RS-422 or RS-485
○
14 T-ADJ Input and output terminal blocks for time synchronization among DVRs
○
15 RELAY OUT 4 relay output terminal blocks
○
16 ALARM IN Input terminal blocks for alarm signals
○
17 USB1 / USB2 USB 2.0 ports to use USB memory stick, Mouse or the external devices
○
18 ETHERNET Port for 10/ 100Mbps Ethernet/ xDSL
○
19 REMOTE Reserved
○
20 POWER IN Socket for a 230/115VAC power cord
○
21 POWER SELECT Switch to select between 230VAC and 115VAC
○
22 GROUND Earth ground port to connect with the external devices
○
4○ 7○ 8○ 10○ 9○
17 ○ 18 ○ 19 ○ 21 ○ 22
○
14 ○ 16○
6○
20
○
12 ○
13○
11 ○
15○
1○ 2○ 3○ 5

10
INSTALLATION
Chapter 4 Installation
4.1 TOTAL CONNECTION LAY-OUT
XDSL MODEM
ETHERNET HUB