ARTRAY ARTCAM-0134AR-WOM Series User manual

November 12, 2020
Ver1.03
USB2.0 CMOS CAMERA SMALL TYPE
ARTCAM-0134AR-WOM Series
INSTRUCTION BOOKLET
1.2M pixels ARTCAM-0134AR-WOM Series
ARTRAY CO., LTD.

Contents
1. Attention………………………………….3
2. Introduction………………………………6
3. Main Features……………………………6
4. The Product………………………………8
5. Connect the Camera…………………….9
6. Specifications…………………………….10
7. External Dimensions…………………….12
8. Spectral Sensitivity Characteristics……...15
9. Characteristic of visible light cut filter.……16
10. Optional Functions……………………….17
11. Recommended PC………………..……..18

- 3 -
1. Attention
■About this manual
1．Before using the camera, please read this manual thoroughly.
2．Please keep this manual reachable and always refer to the contents when needed.
3．Please contact us if the manual is lost or damaged. We will provide a replacement.
4．We cannot guarantee the safety of improper uses of the camera.
5．For your safety, please follow the directions of this manual.
6．All contents are subject to change.
7．Images in this manual may have been simplified to be easier comprehended.
8．Please contact us if you find any unclear points or mistakes in this manual.
9．Quoting, copying or altering some or all parts of the manual without our permission is prohibited.
10．We are not responsible for any lost or damages on your profits due to the use of our products.
11．Please understand that our oversea branches do not provide maintenance or repair services.
■About the Icons
To keep the safety of the user, other people and their properties, please pay attention to the following icons.
Warning
If the user fails to follow the instruction, serious injury or death may occur.
Caution
If the user fails to follow the instruction, physical injury on human or damages on hardware may occur.

- 4 -
■For Safe Use
Warning
●In following circumstances, please stop using the product and turn off the power immediately to prevent the risks of
fires and electric shocks. If the product is defective, please contact us for repair or exchange. For your safety, please do
not disassemble, modify or repair the camera on your own.
Please stop using the product and turn off the power immediately when:
・The product becomes smoky or gets extremely hot on the surface, or makes unusual smells or sounds.
・Foreign material or water gets into the product.
・The product falls and becomes damaged.
●Do not place the product on unstable surfaces. The product may be fallen and people may get hurt.
Caution
●Do not expose the product to steam or fumes to avoid electric shocks and fires.
●Do not leave the product in high temperature places such as inside of vehicles or under direct sunlight.
High temperature may cause damages to the camera, or even cause fires.
●Do not cover the product with cloth or other materials. The product may get extremely hot and the heat may cause
deformations on the parts or even cause fires.
●Please avoid dropping or shocking the product as the product may be damaged.
●Do not touch the cable with a wet hand. Such action may cause electric shocks.
●Please avoid continuously contacting the surface of the camera to your skin when the camera is being used. The
surface temperature of the camera may cause burns.
■Other Notices
●Please do not use the camera under strong lights such as sun light for a long period. Also please do not expose the
camera under strong lights even when the product is not being used because the sensor might be damaged.
Maintenance
●Wipe the dirt on surface with soft cloth or tissue paper. Do not use alcohol, thinner or benzene to avoid damaging the
surface paints.
Electro Magnetic Interference
●The camera may interference with electronic devices such as TV and radio. Please do not place the camera next to
such equipment.

- 5 -
■Export Control
The Government of Japan controls military sensitive goods and technologies including relevant dual-use goods and
technologies.
This product is a Catch-all Control item subject to the Foreign Exchange and Foreign Trade Act and its relevant
legislations. Except for exporting to the 26 white countries designated in the Cabinet Order, export licenses are required
if the products are going to be used for military use or if the end user of the product is related to all kinds of military
activities. If your circumstances cause the need to apply export licenses, please notify us before you place orders. Also,
please notify us in advance if the end users or purposes of use change after the purchase and thus cause the need to
apply export licenses.
*The 26white countries not under the UNSC Arms Embargo:
Argentina, Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic, Denmark, Finland, France, Germany,
Greece, Hungary, Ireland, Italy, Luxemburg, Netherlands, New Zealand, Norway, Poland, Portugal, Spain, Sweden,
Switzerland, United Kingdom, and United States
About the Japanese Security Export Controls, please refer to the webpage for Security Export Control Policy, The
Ministry of Economy, Trade and Industry:
http://www.meti.go.jp/policy/anpo/englishpage.html
■Guarantee
To save the environment, we do not issue warranty in printed format. Instead, all records of the warranty periods,
delivery dates and the customer information are well kept in our system.
For more details, please refer to the sites below:
Hardware Warranty : http://www.artray.us/download/artray_warranty.pdf

- 6 -
2. Introduction
ARTCAM-0134AR-WOM Series is CMOS cameras for industrial use.
This series adopt USB2.0 interface, so the data can be delivered to PC directly without a capture board.
Cameras are equipped with on board memory which avoid data missing during transfer.
We provide a variety including cased cameras, board cameras which can be easily incorporated to other equipment,
and so on.
3. Main Features
・USB2.0 Interface
Our cameras adopt USB2.0 interface, so the data can be delivered to PC directly and no capture board is needed.
・Small and Light
Our cameras are small and light, thus can be easily installed according to your desires.
Also, the board type camera with small type board lens is easy to be incorporated with other machines.
・Varieties to Your Needs
We provide a variety including cased cameras, board type cameras, C-Mount board type cameras.
Also, we provide color, monochrome and NIR models to meet customers’ needs.
・ROI (Region Of Interest)
One major benefit of CMOS sensor is the ROI function which enables readout of designated partial images with a
faster transmission speed.
Total
vertical
pixels
Total horizontal pixels
(0,0)
(Horizontal
origination,
Vertical
origination)
Horizontal pixels
Vertical
pixels
Valid area

- 7 -
・Mirror function
You can flip images vertically and horizontally by process of a sensor.
・Bounded Viewer Software
We provide the Viewer Software - ART-Viewer (Windows 7/8/8.1/10).
With this software, users can easily preview, save images and change camera settings.
・2D Measurement & Filing Software(Optional)
Useful 2D measuring functions are available with the optional 2D Measuring & Filing Software - ART-MEASURE.
・Software Development Kit
For customer who prefers to create their own image processing software or use our camera with other applications, we
provide SDK upon requests.

- 8 -
4. The Product
1) Camera
2) USB Cable Type A-B connector cable, 3m approx.
3) Introduction Booklet
4) Viewer software/Device Driver CD
5) Software Development Kit [ARTCCM-SDK]
<Options>
1) C Mount lens
2) 2 Measurement & Filing Software [ART-MEASURE]
3) 5m extension cable with USB2.0 repeater

- 9 -
5. Connect the Camera
5-1 How to connect a camera
5-2 Shutter Speed
Shutter speed can be changed on the standard viewer software ART-Viewer.
The shutter speed is set directly on the sensor register, so please refer to the following formulas for the real exposure
time.
Model Method
0134AR-WOM Series
Range：1~16383(Exposure Time：1/26747~0.61 sec)
Exposure Time＝(1280+108) × Shutter Value × 1/37.125 [μsec]
at 37.125MHz

- 10 -
6. Specifications
6-1 Color Model
ARTCAM-
0134AR-WOM
0134AR-WOM-OP
0134AR-WOM-OP-CM
Sensor Type CMOS Color Image Sensor
Active Pixels 1280(H)×960(V)
Active Imager
Size
4.86(H)×3.66(V)mm
1/3”
Scan Mode Progressive Scan
Pixel Size 3.75(H)×3.75(V)μm
Shutter Type Global Shutter
Color Filter
Array RGB Bayer Pattern
Frame Rate 27.0fps
Shutter Speed 1/26747~0.61s
Interface USB2.0 Bulk Transfer
Synchronization
System Internal Synchronization
Lens Mount
C Mount
(0134AR-WOM, 0134AR-WOM-OP-CM)
Board lens Mount M12 P0.5
(0134AR-WOM-OP)
Power DC5V(Supplied by USB port)
Power
Consumption Under Approx.2W
Ambient
Conditions
Operating Temperature/Humidity：0~35°C/10~80%(Non condensing)
Storage Temperature/Humidity：0~60°C /10~95%(Non condensing)
External
Dimensions
50(W)×47(H)×41.7(D)mm(0134AR-WOM)
43.5(W)×43.5(H)×26.2(D)mm(0134AR-WOM-OP)
50(W)×47(H)×28.6(D)mm(0134AR-WOM-OP-CM)
*Lens, tripod mount not included
Weight
Approx.100g(0134AR-WOM)
Approx.20g(0134AR-WOM-OP)
Approx.60g(0134AR-WOM-OP-CM)
*Lens,tripod mount and cable not included