ARTRAY ARTCAM-130MI Series User manual

-1-
USB2.0 COLOR(BW) CMOS CAMERA
ARTCAM-130MI
INSTRUCTION BOOKLET
ARTRAY CO.,LTD.
1.3M pixels progressive
May 30,2004

-2-
Contents
1. Description 3
2. Main Features 3
3. List of items 3
4. Position of each part 4
5. Functions and Operation 5
6. Dimension 5
7. Specifications 6

-3-
1. Description
2. Main Features
3. List of Items
ARTCAM-130MI is a 1/2" CMOS color(BW) camera developed for industrial use.
Image can be saved directly to your PC with high-speed transfer via USB2.0 interface.
* High sensitivity and high resolution
Max.resolution of 1280Z1024 pixels. Image size can be altered.
* Flange-back adjustment˴˴
˴˴
With Artray's original mechanism, flange-back is adjustable
while real-time image is displayed.
* Electric shutter
˴˴
Shutter speed can be adjusted on software screen.
˴Please commute exposure time with the following formula;
(Shutter value x 1514 - 180) x 0.000041(msec)
* Frame rate
˴˴
Frame rates are different for 8 bits model and 10 bits model.
<8 bits model> <10 bits model>
XGA:15FPS XGA:11FPS
SVGA:40FPS SVGA:30FPS
* Gain
"Gain" can be controlled from the PC.
* Offset
"Offset" can be controlled from the PC.
* B/W sensor camera
ARTCAM-130MI-BW
1)˴Camera 1(equiopped with tripod breaket, but not lens)
2)˴User Instruction 1
3)˴Software CD 1
ޝOptionޞ
1)Filing & 2D measuring system
2)SDK(ARTCAM-SDK)
3)5.0m camera cable

-4-
4. Position of Each Part
4-1 Side panel
4-2 Back panel
Do NOT remove the cover. This may break camera or cause static electricity.
Caution
(1) USB
:USB2.0 interface cable
(2) TRG (BNC)
:External contact trigger
*Connect the external contact point as below.
Flange-back adjustment
screw
(1) (2)
Internal circuit
+3.3V
△
Triger
10KΩ

15mm
26mm
4/1"-20UNC camera fixing screw
50mm
50mm
50mm
58mm
-5-
5. Functions and operation
6.Dimension
5-1 Selection of lens
5-2 Camera connection
The mount of lens is C-mount.
C-mount fixing screw is installed in the camera.
PC monitor
PC
USB2.0 Cable
USB2.0
host adaptor
ARTCAM-130MI
Image output/power connection
12mm
≒2mm
C Mount ring
M2.6-2(depth 5mm)
18mm
Flange dimension

-6-
7. Specifications of camera
Electric characteristics
ARTCAM-130MI
1. Image pick up device
2. Color mothod
3. Max. resoluion
4. Lens size
5. Soan mode
6. Pixel size
7. S/N ratio
8. Sensitivity
9. Electric shutter mode
10. White balance
11. Synchro system
12. Flange back
13. Lens mount
14. Offset
15. Gain
16. Power supply
17. Power condensing
18. Ambient temperature
and humidity
19. Dimension and weight
SPECParameter Comment Remark
NO
1 Power
2 Shutter control
3 Gain control
4 S/N ratio
5 γcharacteristics
6 Power consumption
7 Image interface
1/2"CMOS
Single-panel CMOS color method
1.3M pixel
1/2"format
Progressive
5.2μmx5.2
μm(6.65 x 5.32mm pixel areas)
54dB
1.8V/Lux-sec(550nm)
Manual 1/30-1/1800
Manual/auto, switchable
Internal syschro
Manual adjustment
C mount(Lens is NOT included)
Manual adjustment
Manual adjustment
DC5V（SELV）
2.0W approx
0-35℃(recommended), 80%(non-condensing)
50(W)×50(H)×65(D)mm,230g approx
+5V 0.3A
Manual adjustment
Manual adjustment
54dB
1.0 fixed
<2.0W
USB2, digital output
supplied by USB port
software control
software control

-7-
Image pick up device
SPEC
Parameter Comment Remark
1 Imager
2 Optical size
3 Total resolution
4 Max resolution
5 Pixel size
6 Sensitivity
7 IR cutting filter
MI1300
Equivalent to 1/2"
1312 x 1048
1280x1024
5.2x5.2um
1.8V/Lux-sec(550nm)
color:have
Physical specifications
SPEC
Parameter Comment Remark
1 Lens
2 Max weight
3 Dimension
4 Material of enclosure
C mount
<230g
(with cable)
50×50×65mm
Diecasted aluminium
Operating environment
SPECParameter Comment Remark
NO
-10-50℃
（10-95%RH、non-
condesing）
-35-80℃
（10-95%RH、non-
condesing）
7hours(at60
℃）
EN61000-6-4
EN61000-6-2
Acceleration:29.4M/S
Frequency:5-200Hz
Sweep cycle:10min
Test time:
Ups and down 2h
Left and right 2h
Back and fouth 2h
Tesk OK
1 Operating temperature
2 Storage temperature
3 MTBF
4 EMI
5 EMS
6 Vibration
NO
NO

-8-
ARTRAY CO.,LTD.
Ueno bldg, 1-39-8 Nogata Nakano-ku,
Tokyo Japan 165-0027
Tel:[phone] Fax:[phone]
Email: [e-mail]
URL: http://www.artray.co.jp
<<System requirements>>
*CPU: Pentium4 1.5GHz or higher
Embedded USB2.0 port (PCI/PCMCIA USB2.0 ports are not compliant)
*Memory 512MB or higher
*OS Windows 2000/XP(SP1)
Technical standard
SPECParameter Comment Remark
NO
1˴˴UL approved Materials used in
wiring are compliant
with UL.
Storage temperature
(10-95%RH, non-condensing)
Under Application
2˴˴CE