Aruba SFP User manual

SMALL FORM-FACTOR PLUGGABLE
(SFP / SFP+ / SFP28) MODULE
INSTALLATION GUIDE

2
Contents
Introduction ..........................................................................................................................................................3
Laser Compliance ................................................................................................................................................3
Federal Communications Commission Notice .....................................................................................................3
Installing the Transceiver Module ........................................................................................................................4
Removing the Transceiver Module ......................................................................................................................5
Appendix ..............................................................................................................................................................6
Product Overview ................................................................................................................................................................... 6
Bail Latch Color ...................................................................................................................................................................... 6
EdgeOS Default Settings ....................................................................................................................................................... 6
SFP Module Specifications .................................................................................................................................................... 7
EC-SFP-1000BT ..................................................................................................................................................7
SFP+ Module Specifications .................................................................................................................................................. 7
EC-SFP-SR..........................................................................................................................................................7
EC-SFP-LR ..........................................................................................................................................................7
EC-SFP-10G-LR ..................................................................................................................................................7
SFP28 Module Specifications ................................................................................................................................................ 8
EC-SFP28-25G-SR..............................................................................................................................................8
EC-SFP28-25G-LR ..............................................................................................................................................8
Fiber-Optic Cable Specifications ............................................................................................................................................ 9
Ethernet Cable Specifications .............................................................................................................................................. 11

3
Introduction
These installation instructions provide overview and specification information for small form-factor
pluggable (SFP/ SFP+/SFP28) modules, as well as instructions for installing and removing the
modules.
Laser Compliance
The fiber-optic SFP+ / SFP28 modules contain a laser that is classified as a “Class 1 Laser Product” in
accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser
radiation.
WARNING: Use of controls or adjustments or performance of
procedures other than those specified herein or in the laser
product’s installation guide may result in hazardous radiation
exposure. To reduce the risk of exposure to hazardous radiation:
Do not try to open the module enclosure. There are no user-
serviceable components inside.
Do not operate controls, make adjustments, or perform
procedures to the laser device other than those specified herein.
Do not stare into open optical ports.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case users will be
required to correct the interference at their own expense.
Modifications to this product not authorized by Silver Peak Systems could void the FCC approval and
negate your authority to operate the product.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device is certified by TUV and CSA to meet Class 1 eye safety requirements of EN (IEC) 60825
and the electrical safety requirements of EN (IEC) 60950.

4
Installing the Transceiver Module
Small form factor transceiver modules (including SFP, SFP+, and SFP28 modules) plug into the SFP
cage of a Silver Peak chassis. The installation process is identical for SFP, SFP+ and SFP28 modules.
CAUTION: Observe electrostatic discharge (ESD) precautions when handling transceiver
modules. Always wear a wrist strap that connects to an approved grounding source when
installing or handling the modules.
CAUTION: To prevent damage to a transceiver module and to any connected cables,
disconnect all cables before installing or removing a module.
IMPORTANT: SFP, SFP+ and SFP28 modules are hot-pluggable devices. There is no need
to power down the appliance when installing or removing a module.
To install a transceiver module into an SFP cage, perform the following procedure.
IMPORTANT: (SFP+ and SFP28 modules) Do not remove the dust cap from the optical
module until directed to do so in the following procedure. In addition, always keep the dust
caps on the fibe
r
-optic cable connectors until ready to make a connection.
1. Verify that the bail latch is closed.
2. Verifying that the cage notch and hinge are along the same edge, insert the module into the cage
until the module latches into place. The module is fully seated when you hear a click.
3. (SFP+ and SFP28 modules) At one end of the fiber-optic cable, remove the dust caps from the
LC connectors. Save the dust caps for future use.

5
4. (SFP+ and SFP28 modules) Inspect and clean the uncovered fiber-optic end faces of the LC
connectors.
5. (SFP+ and SFP28 modules) Remove the dust cap from the module. Save the dust cap for future
use.
6. (SFP+ and SFP28 modules) Connect the LC connectors of the fiber-optic cable to the module.
Removing the Transceiver Module
To remove a transceiver (SFP, SFP+ or SFP28) module from an SFP cage, perform the following
procedure.
(The removal process is identical for each type of transceiver).
1. (SFP+ and SFP28 modules) Disconnect the LC cable connector from the module.
2. (SFP+ and SFP28 modules) Reinstall the dust cap onto each LC cable connector.
3. Remove the module from the SFP cage.
a. Open the bail latch by rotating it 90 degrees.
b. Grasp the module and carefully remove it from the cage.
4. Close the bail latch.
5. Reinstall the dust cap onto the SFP+ / SFP28 module.

6
Appendix
Product Overview
Silver Peak small form-factor pluggable (SFP, SFP+, and SFP28) transceiver modules are hot-
pluggable and field-replaceable. You can use the SFP modules for connecting to other devices.
Only use Silver Peak SFP / SFP+ / SFP28 modules in your Silver Peak chassis. Each module has an
internal serial EEPROM that is encoded with security information. This encoding provides a way for the
Silver Peak chassis to identify and validate that the module meets the requirements for the device.
The following Silver Peak SFP, SFP+ and SFP28 modules are available:
Aruba
P/N
SilverPeak
P/NMinimum
JM535A500405‐001EC‐SFP‐SR:conformsto1000Base‐SXand10GBase‐SRfiber‐opticGigabitEthernetstandards
JM534A500406‐001EC‐SFP‐LR:conformsto1000Base‐LXand10GBase‐LRfiber‐opticGigabitEthernetstandards
JM533A500590‐001EC‐SFP28‐25G‐SR:conformsto25GBase‐SRand10GBase‐SRfiber‐opticGigabitEthernet
standards
JM532A500591‐001EC‐SFP28‐25G‐LR:conformsto25GBase‐LRand10GBase‐LRfiber‐opticGigabitEthernet
standards
R9Y49A500666‐001EC‐SFP‐1000BT:conformsto10/100/1000Base‐TCopperGigabitEthernetstandards
R9Z71A500678‐001EC‐SFP‐10G‐LR:conformsto10GBase‐LRfiber‐opticGigabitEthernetstandards
Bail Latch Color
TransceiverTypeBailLatch
Color
EC‐SFP‐SRBeige
EC‐SFP‐LRBlue
EC‐SFP28‐25G‐SRBlack
EC‐SFP28‐25G‐LRBlue
EC‐SFP‐1000BTYellow
EC‐SFP‐10G‐LRBlue
EdgeOS Default Settings
TransceiverType
EC‐SFP‐SR10G
EC‐SFP‐LR10G
EC‐SFP28‐25G‐SR25G
EC‐SFP28‐25G‐LR25G
EC‐SFP‐1000BT1G
EC‐SFP‐10G‐LR10G

7
SFP Module Specifications
EC-SFP-1000BT
ParameterTypical
LineFrequency125MHz
TxOutputImpedance100Ohm
RxInputImpedance100Ohm
TxInputImpedance50Ohm
RxInputImpedance50Ohm
SFP+ Module Specifications
EC-SFP-SR
ParameterMinimumMaximum
OpticalOutputPower(1G)–9.5dBm–1dBm
OpticalReceiveSensitivity(1G) –17dBm
MaximumInputPower(1G)+0.5dBm
OpticalOutputPower(10G)–5dBm–1dBm
OpticalReceiveSensitivity(10G) –11.1dBm
MaximumInputPower(10G)+0.5dBm
EC-SFP-LR
ParameterMinimumMaximum
OpticalOutputPower(1G)–11dBm –3dBm
OpticalReceiveSensitivity(1G) –19dBm
MaximumInputPower(1G) –3dBm
OpticalOutputPower(10G)–8.2dBm+0.5dBm
OpticalReceiveSensitivity(10G) –12.6dBm
MaximumInputPower(10G)–14.2dBm+0.5dBm
EC-SFP-10G-LR
ParameterMinimumMaximum
OpticalOutputPower(10G)–8.2dBm +0.5dBm
OpticalReceiveSensitivity(10G) –12.6dBm
MaximumInputPower(10G) –14.2dBm+0.5dBm

8
SFP28 Module Specifications
EC-SFP28-25G-SR
ParameterMinimumMaximum
OpticalOutputPower(10G)–8.4dBm+2.4dBm
OpticalOutputPower(25G)–8.4dBm+2.4dBm
OpticalReceiveSensitivity(10G) –10.1dBm
MaximumInputPower(25G)–10.3dBm+3.0dBm
EC-SFP28-25G-LR
ParameterMinimumMaximum
OpticalOutputPower(10G)–8.2dBm+0.5dBm
OpticalReceiveSensitivity(10G) –12.6dBm
MaximumInputPower(10G)–14.2dBm+2.0dBm
OpticalOutputPower(25G)–7.0dBm+2.0dBm
OpticalReceiveSensitivity(25G) –11.3dBm
MaximumInputPower(25G)–13.3dBm+2.0dBm

9
Fiber-Optic Cable Specifications
EC‐SFP‐SR
WhenOperatedin1000Base‐SXMode

Wavelength:850nanometers
CoreSize
(micron)
Modal
Bandwidth
(MHz/km)
TransmissionDistanceCableTypeConnectorTypeCableColor
62.5160220m(722feet)Multi‐mode,OM1LCfiberOpticsOrange
62.5200275m(902feet)Multi‐mode,OM1LCfiberOpticsOrange
50400500m(1640feet)Multi‐mode,OM2LCfiberOpticsOrange
50500550m(1804feet)Multi‐mode,OM2LCfiberOpticsOrange
502000>550m(1804feet)Multi‐mode,OM3LCfiberOpticsAqua
EC‐SFP‐SR
WhenOperatedin10GBase‐SRMode

Wavelength:850nanometers
CoreSize
(micron)
Modal
Bandwidth
(MHz/km)
TransmissionDistanceCableTypeConnectorTypeCableColor
62.516026m(85feet)Multi‐mode,OM1LCfiberOpticsOrange
62.520033m(108feet)Multi‐mode,OM1LCfiberOpticsOrange
5040066m(217feet)Multi‐mode,OM2LCfiberOpticsOrange
5050082m(269feet)Multi‐mode,OM2LCfiberOpticsOrange
502000300m(984feet)Multi‐mode,OM3LCfiberOpticsAqua
EC‐SFP‐LR
WhenOperatedin1000Base‐LXMode

Wavelength:1310nanometers
CoreSize
(micron)TransmissionDistanceCableTypeConnectorTypeCableColor
95km(3.1miles)Single‐mode,OS2LCfiberOpticsYellow
EC‐SFP‐LR
WhenOperatedin10GBase‐LRMode

Wavelength:1310nanometers
CoreSize
(micron)TransmissionDistanceCableTypeConnectorTypeCableColor
910km(6.21miles)Single‐mode,OS2LCfiberOpticsYellow

10
EC‐SFP‐10G‐LR
WhenOperatedin10GBase‐LRMode

Wavelength:1310nanometers
CoreSize
(micron)TransmissionDistanceCableTypeConnectorTypeCableColor
910km(6.21miles)Single‐mode,OS2LCfiberOpticsYellow
EC‐SFP28‐25G‐SR
WhenOperatedin10GBase‐SRMode

Wavelength:850nanometers
CoreSize
(micron)
Modal
Bandwidth
(MHz/km)
TransmissionDistanceCableTypeConnectorTypeCableColor
504700550m(1804feet)Multi‐mode,OM4LCfiberOpticsAqua
EC‐SFP28‐25G‐SR
WhenOperatedin25GBase‐SRMode

Wavelength:850nanometers
CoreSize
(micron)
Modal
Bandwidth
(MHz/km)
TransmissionDistanceCableTypeConnectorTypeCableColor
504700150m(492feet)Multi‐mode,OM4LCfiberOpticsAqua
EC‐SFP28‐25G‐LR
WhenOperatedin10GBase‐LRMode

Wavelength:1310nanometers
CoreSize(micron)TransmissionDistanceCableTypeConnectorTypeCableColor
910km(6.21miles)Single‐mode,OS2LCfiberOpticsYellow
EC‐SFP28‐25G‐LR
WhenOperatedin25GBase‐LRMode

Wavelength:1310nanometers
CoreSize(micron)TransmissionDistanceCableTypeConnectorTypeCableColor
910km(6.21miles)Single‐mode,OS2LCfiberOpticsYellow

11
Ethernet Cable Specifications
EC‐SFP‐1000BT

TransmissionDistanceCableTypeConnectorType
100m(328feet)Category5UTPRJ‐45

www.arubanetworks.com
6280 America Center Drive, San Jose, CA 95002
1.877.210.7325 (toll-free in USA) | +1.408.935.1850 | www.silver-peak.com/support
Document 201845 Rev. B