
When the speakers are installed on the walls, ensure
the wall structure is reliable and that the speakers are
firmly attached.
Install the speaker in a location that can structurally
support the weight of the speaker and its mounting
hardware. otherwise it may result in the unit falling
down and causing personal injury.
Do not use nails, adhesives or other unauthorized
devices long-term use and vibrations may cause it to
fall easily.
Do not touch or bump the woofer and tweeter. If these
are damaged, the sound will be distorted.
Lower the volume of the device and source unit when
changing the input source. (i.e. To tune fm / cd). Turn
off the device and source unit when installing or
removing cables.
PassiveSpeaker X2 Ball-jointBracket X2
- 1 -
PhoenixConnector X2 Screws X8 Screws X8 UserManual
SAFETY INSTRUCTIONS
PACKING LIST