Asante FRIENDLYNET FS4116R User manual

Quick Installation Guide
FriendlyNET 16 and 24-Port
10/100 Workgroup Switches
(Desktop/Rackmount)
FS4116R
FS4124R
Plug and Play Networking Solutions
SWITCHES
ASANTETALK
CONNECTIVITY
••• •••
FriendlyNET
®
M ak ing Networking Simple

workgroup switch. This switch is simply the most affordable,
powerful 10/100 Fast Ethernet solution for connecting
desktops, high-performance servers and workstations.
This switch has the following key features:
Fast
Ethernet standards.
for
half duplex.
negotiation function.
Packing List
Your package contains the following items:
•
•
•
••
•
•
•
001/01TENyldneiré FtnasAnagnisahcruprofuoyknahT
Introduction
M ak ing Networking Simple

LED Indicators
M ak ing Networking Simple

If you are connecting several workstations and a server, you
can build the
network using the switch as shown below.
A Simple Network Topology
FriendlyNET 10/100
Workgroup Switch
10/100/1000 Mbps
10/100 Mbps
10/100/1000 Mbps
10 Mbps
M ak ing Networking Simple
Connecting to Network Devices

Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Interface: FS4116R - 16 RJ-45 ports with Auto-MDI/MDI-X
FS4124R - 24 RJ-45 ports with Auto-MDI/MDI-X
Switch
Architecture: Store and Forward
MAC FS4116R: 4K
Address: FS4124R: 4K
Buffer FS4116R: 1.5M
Memory: FS4124R: 1.5M
Nway Auto-
Negotitation: All ports
Full-Duplex/
Half-Duplex: All ports
LEDs: Power, Link/Activity, FDX/COL
Power: 100~240V AC, full range internal power supply
Physical 10.5in x 6.8in x 1.8in (W x D x H)
Dimensions: 267mm x 175 mm x 44 mm (W x D x H)
Weights: FS4116R: 1.2kg/2.65lb
FS4124R: 1.3kg/2.87lb
Operating
Temperature: 0°C to 40°C (32°F to 104°F)
Storage
Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 20% ~ 85% relative humidity, non-condensing
EMC Certification: FCC Class A, CE
Visit Asante online at www.asante.com
M ak ing Networking Simple
Product Specifications

M ak ing Networking Simple
FCC Compliance Statement
This hardware device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and
found to comply with the limits
for a Class A computing device in accordance with the specifications in Subpart B of Part
15 of FCC rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation.
If you suspect this equipment is causing interference, turn your unit on and off while your
radio or TV is showing interference. If the interference
disappears when you turn the unit off
and reappears when you turn the unit on, something in the unit is causing interference. You
can try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna;
2. Increase the separation between the equipment and the receiver;
3. Connect the equipment to an outlet on a circuit different from that to which the receiver
receiver is connected;
4. Consult the place of purchase or an experienced radio/television
technician for additional
suggestions.
Any changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
Safety Advisory
1. This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available, consult your dealer or
local power company.
2. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
3. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
4. Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to service
personnel.