ASI EZ FILL 0393-R User manual

Scan for
Information
Technical Data Sheet
Product overview
Allows programming of all individual dispenser units from one hand held remote. Adjusts the soap dispenser setting from one
of four presets. Temporarily shuts o auto dispensation function to perform cleaning or filling. Can reset to factory settings. One
Remote Control per order will be provided at no charge, IF you order the 6 Pack SKU – (Foam and Liquid dispensers have dierent
remotes)
Soap Dispensers EZ Fill
Key Features & speciFications
• Remote for Foam Soap Dispensers
• Included at no charge with a 6 pack
• Available seperately as well
• Controls flow, and turns o unit during maintainence
• Hand Held
American Specialties, Inc. | 441 Saw Mill River Road, Yonkers, NY 10701 | [phone] | www.americanspecialties.com
Model:#0393-R Issued: 11/1/2021 Revised: 3/10/2023
Page: 1 of 2
Revision:R1
3/8"
[10]
1/2"
[13]
1-7/16" [36]
2-3/8"
[60]
2-3/16"
[56]
1"
[25]
3/4" DIA [Ø20]
SOAP VOLUME
ADJUSTMENT LED
AIR VOLUME
ADJUSTMENT
KEY FOB
RESET TO
FACTORY DEFAULT
ON / OFF
TEMPORARY
REMOTE PUMP FILL
ACTIVITION
SuStainability/lEED
EZ FILL™ Remote Control to adjust dispensing settings on FOAM SOAP Dispenser
Toilet AccessoriesCSI:10 28 13
Model #0393-R
MasterFormat Section 10 28 13
330
NOTE:
ALL DIM’S INCH [MM]
ILLUSTRATION FOR REF ONLY AND NTS
SEE SOAP DISPENSER CARE & MAINTENANCE
DOCUMENT ONLINE FOR CLEANING

OperatiOn & Maintenance
technical infOrMatiOn / prOduct prOperties
installatiOn
Warranty
Technical Data Sheet
Model #0393-R
Unit is supplied with batteries and requires no service maintenance. Keep in dry location. Key fob hole allows unit to be
hung on hook or key-ring.
Manufacturer reserves the right to make changes to the design, dimensions or functionality of the product without formal notice.
Remote is compatible with all EZFill™ Foam Soap Dispenser units to adjust programmed dispense amount. Left sector
button, marked “SOAP”, allows selection of dispense volume, identified as “+” and “-”. Right sector button, marked “AIR”,
allows selection of air volume to adjust foam consistency, identified as “+” and “-”. Separate button, marked “RES”, resets
unit to factory default condition. Separate button, marked “FILL”, assists in pump priming after soap refill. Continuous run
mode (1 minute time-out unless “FILL” pressed again to terminate cycle) facilitates delivery of fresh soap to dispenser.
Button press “ON-OFF” suspends operation for 1 minute or until button re-pressed to restore operation. Hold remote
directly in front of sensor to avoid possible interference with adjacent dispenser units, at a distance of 5" ± 1" [127 ± 25] to
button-press initiate any of the commands. Each successful command implementation will be confirmed by LED flashes.
Refer to Owner’s Manual (supplied with unit) for complete description of LED flash codes and features.
One (1)Year from date of invoice
American Specialties, Inc. | 441 Saw Mill River Road, Yonkers, NY 10701 | [phone] | www.americanspecialties.com
Model:
CSI:
#0393-R
10 28 13 Toilet Accessories
Issued: 11/1/2021 Revised: 3/10/2023
Page:
Revision:
N/A
N/A
Property Value
Dimensions
Construction
N/A
Replacement Part
2 of 2
R1
Mounting
Options