Aspace 2022 User manual

Care of your Product
Product Safety
Care of your Product
Welcome
Care of your Product
Customer Service 0845 872 2400
About ASPACE
Many of us at ASPACE are parents. Despite occasional urges to pack them off to the
workhouse we know what a pleasure it is to provide one’s children with a lovely space
where they can feel cosy, secure, loved and in charge (well, up to a point!). Our mission
at ASPACE is to allow you to give them that space of their own.
Our furniture is available exclusively from ASPACE and is designed and specified by us
with children in mind. We wish you and them many happy years with it.
PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE
Under Bed Drawer
Code: 2022
Product Care
Thank you for buying this Under Bed Drawer.
Before beginning assembly, please take a few minutes to read these instructions.
Lay the parts out on a clean, soft surface such as a carpeted floor and compare with the
Parts Check List on the next page. Do not throw away any packaging until you are sure
that you have all the parts.
If for any reason you wish to return the product, you must disassemble the components
and use the original packaging.
The product must be assembled by an adult. There are small parts: keep small children
clear of the assembly area.
Some stages of assembly are easier with more than one person.
If you have a problem with this product please call our Customer Service Team, who will
be glad to help.
We can usually provide replacement and / or spare parts promptly; it will help us if you
can identify the specific part using the check list in the next section.
Ÿ
Ÿ
Ÿ
Ÿ
Periodically check all fittings to ensure that none have come loose.
The Under Drawer must be set up on an even and stable surface.
Keep away from direct sources of heat, such as electric, gas or coal fires.
Using this furniture other than for its intended purpose could cause damage to the
structure or serious injury to your child.
Ÿ
Ÿ
Clean your under drawer by wiping with a damp cloth & drying with a soft cloth. Never
clean with abrasives, chemical cleaners or household polishes.
Take care when handling or moving the Drawer. Careless handling can damage
wooden furniture.

Parts Check List
You will need a cross-head
4x Castors
and a slot-head screwdriver
1. Prepare the Front, Back, Sides & Brace. 2. Fit the Sides and Brace.
3. Fit the Base and Back.
1x Base
1x Front
Front
Sides x2
Back
Brace
2x Sides
10x Cam Bolts
10x Cams
6x Dowels
8x Screws
4. Fit the Castors.
Per Drawer
1x Back
1x Brace
You need: 10x Cam Pins Cross-head Screwdriver
Lay the parts on a soft level surface such as a carpeted floor and screw
Cam Pins into the smaller holes on the reverse of the front and back as
shown (A). Fit 10x Cams into the large holes in the Sides and Brace as
shown (B) and fit 6x Dowels into the end edges of both Sides and Brace
as shown (C).
A
AA
AA
AA
A
AA
A
B
BB
B
B
B
B
C
C
C
C
C
You need: A Screwdriver.
Carefully fit the Sides onto the front, ensuring that the
grooves and the Cams are facing inwards. Ensure that
the exposed heads of the now fitted Dowels and Cam
Pins fully engage into their corresponding holes as
shown. Once all is engaged and aligned, tighten each
Cam clockwise to secure the parts together.
You need: A Screwdriver
Carefully fit the Base by sliding it downwards into the grooves on the
inside faces of the sides, also making sure that it is fully engaged into the
groove in the back of the Drawer Front. Once the Base is correctly in
position, fit the back onto the assembly by locating the exposed heads of
the fitted Dowels and Cam Pins into the holes in the sides and Brace.
Once the parts are aligned and engaged correctly, tighten each Cam to
secure the back (don't forget the Cam in the Brace).
You need: 8x Screws, 4x Castors and a Screwdriver
Carefully flip the assembly over and fit the 4x Castors to the bottom
of the Drawer as shown using 2x Screws for each castor as shown.