Aspire BTS118025 User manual

www.aspirecare.com.au
1300 133 120
1
2
Lay seat on a flat surface and mount leg supports across the seat, securing in place with the medium hand wheel bolt 7
in the centre of the seat.
Fasten back supports 3in place across leg supports, screw in place in all 4 x corners (through both tubes) with hand wheel
bolts (large size) 7.
NOTE: This applies to the shower chair only. For shower stools, screw hand wheel bolts in the same 4 x corners, not through
backrest tubes.
ASPIRE HOMECARE
SHOWER STOOL & SHOWER CHAIR
ASSEMBLY INSTRUCTIONS
BTS118025 | BTS119025
ASSEMBLY INSTRUCTIONS
Carton Contains:
1
2
4
5
6
87
33
1. Seat (x1)
2. Leg supports (x2)
3. Backrest and supports (x2)
4. Armrests (x2)
5. Adjustable legs (x4)
6. Small hand wheel bolt (x4)
7. Medium hand wheel bolt (x1)
8. Large hand wheel bolt (x4)
NOTE: Shower stools do not contain backrests
or large hand wheel bolts.

ASUM72.5 130921
www.aspirecare.com.au
1300 133 120
3
4
5
6
Fasten leg extension tubes onto leg supports.
NOTE: 1 x leg extension tube has extra holes on it to handle uneven surfaces, please ensure all 4 x legs are at the same height
prior to use.
Fasten armrests into receivers on either side of the frame, ensuring 4 x locking pins (2 x either side) are locked in place.
Fasten backrest to back supports, fasten in place with 4 x hand wheel bolts (small size).
NOTE: This is only applicable for the Shower Chair, not the Shower Stool.
Check and ensure all handwheel bolts (both small and large) are fastened in place, armrest pins are secured and locked
in place and that all 4 x legs are at the same height, your Aspire Homecare Shower Chair or Stool is now ready for use.
Before use, adjust height
of each leg to your specific
needs, making sure all legs
are at the same height.
When desired height is
reached, lock legs into place
by aligning buttons into
proper holes, per illustration.
LEG HEIGHT ADJUSTMENT
SHOWER STOOLSHOWER CHAIR