ASTRALVISION AVSA PRO Series User manual

AVSA PRO
Interactive Touch Screen
User Manual

ii
Contents
About This Document.................................................................................................................v
Safety Instruction......................................................................................................................vi
1 Overview.................................................................................................................................1
1.1 Parts .............................................................................................................................................................................. 1
1.2 Ports.............................................................................................................................................................................. 3
1.3 Remote Control............................................................................................................................................................. 6
1.4 Temperature Control..................................................................................................................................................... 7
2 Installation Guide ....................................................................................................................8
2.1 Safety Precautions ........................................................................................................................................................ 8
2.2 Installation Precautions .............................................................................................................................................. 10
2.3 Installation .................................................................................................................................................................. 11
2.4 Installing the Internal PC (Optional)............................................................................................................................ 12
3 Getting Started......................................................................................................................14
3.1 Power On .................................................................................................................................................................... 14
3.2 Power Off .................................................................................................................................................................... 15
3.3 Calibration................................................................................................................................................................... 15
4 Operating the Touch Screen ...................................................................................................19
4.1 Start Screen................................................................................................................................................................. 19
4.2 Home .......................................................................................................................................................................... 19
4.3 System Settings ........................................................................................................................................................... 23
4.3.1 Network Settings ..................................................................................................................................................... 23
4.3.2 Language and Input Method Settings...................................................................................................................... 24
4.3.3 Storage..................................................................................................................................................................... 27
4.3.4 Applications ............................................................................................................................................................. 28
4.3.5 Whiteboard/Screenshot .......................................................................................................................................... 28
4.3.6 Smart Eye Protection ............................................................................................................................................... 29
4.3.7 Date and Time Settings ............................................................................................................................................ 29
4.3.8 Power ON/OFF Setting............................................................................................................................................. 31
4.3.9 Wallpaper Setting .................................................................................................................................................... 33
4.3.10 Input/Output Setting ............................................................................................................................................. 34
4.3.11 Security Setting ...................................................................................................................................................... 34
4.3.12 About ..................................................................................................................................................................... 35

iii
4.4 Built-in PC ................................................................................................................................................................... 36
4.5 Source ......................................................................................................................................................................... 36
4.6 Whiteborad ................................................................................................................................................................. 37
4.6.1 Whiteboard Functions ............................................................................................................................................. 39
4.6.2 Page Operations....................................................................................................................................................... 46
4.6.3 Object Detection...................................................................................................................................................... 48
4.7 Screen Sharing ............................................................................................................................................................ 49
4.8 File Management ........................................................................................................................................................ 49
4.8.1 File Viewer Page....................................................................................................................................................... 50
4.8.2 File Preview.............................................................................................................................................................. 50
4.8.3 File Filtering ............................................................................................................................................................. 52
4.8.4 File Search................................................................................................................................................................ 52
4.8.5 File Operation .......................................................................................................................................................... 51
4.8.6 File Name ................................................................................................................................................................. 54
4.9 Apps ............................................................................................................................................................................ 54
4.10 Automatically End Meeting ...................................................................................................................................... 56
5 Quick Setting Menu ...............................................................................................................57
6 Serial Port Control .................................................................................................................59
7 FAQs & Troubleshooting ........................................................................................................64
8 Specifications ........................................................................................................................67
9 More Information..................................................................................................................70

iv
Thank you for choosing the Interactive Touch Screen. Please use this document to get the
most out of your screen.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE 1: This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined
by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the device.
The symbol of the crossed out wheeled bin indicates this product should not be placed in
municipal waste. Instead, you should dispose of waste device by handing it over to a
designated collection point for the recycling of electrical and electronic device.

v
About This Document
This document describes multiple functions, instructions, and notes about the product.
Symbols are used in this document to indicate operations that need particular attention. The
symbols are defined as follows:
Provide additional information to supplement
operation in the main text.
Provide tips for operation.
Indicate a potentially hazardous situation that, if not
avoided, could result in device damage, data loss,
performance deterioration, or unanticipated results.
Indicate a hazard with risk that, if not avoided, could
result in death or injury.
WARNING

vi
Safety Instruction
For your safety, please read the following instructions before you use the product. Serious injury or property
damage may be caused by improper operations. Do not try to repair the product on your own.
Disconnect the product from power supply immediately if major failures occur.
Major failures include:
Smoke, peculiar smell or abnormal sound is discharged from the product.
No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power supply
immediately and contact professional staff for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
If any liquid or metal is dropped into the product, power off the product and disconnect
power supply, then contact professional staff for solutions.
Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes but not limited to an inclined plane, a shaky stand, desk or
platform, which might cause turnover and damage.
Do not open the cover or change the product on your own.
High voltage components are installed in the product. When you open the cover, high voltage,
electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor for help.
Use the specified power supply.
To prevent the product from being damaged, do not use any types of power cables other
than that provided with the product.
Use a three-wire socket and ensure that it is properly grounded.
Pull out the power plug from the socket if the product is not used for a long period.
Clean the dust and metal on the power plug regularly.
Fire or electric shock may be caused if the product is powered on when you are cleaning.
Pull out the power plug before cleaning it with a dried cloth.
Do not put items on the top of the product.
Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics or liquid
medicine) on the top of the product.
If any water or liquid is spilled on the product, short circuit may occur and cause fire or
electric shock.
WARNING

vii
Do not walk on or hang any items on the product.
Do not install the product in an improper place.
Do not install the product in humid places, such as the bathroom, the shower room, near
windows, or outdoor environments that experience rain, snow or other harsh weather. Avoid
installation near hot spring vapor. The preceding environments may cause faults in the
product or electric shock under extreme conditions.
Do not put exposed fire source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
Do not touch the product during a lighting storm to avoid electric shock.
Install or place components that supply high enough voltage to cause personal injury out of
the reach of children.
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
Do not install the product near a heat source, such as a radiator, a heat reservoir, a stove or
other heating products.
Do not expose the product to direct sunlight, which may cause high temperatures and
subsequent faults in the product.
For transport:
Pack the product for transport or maintenance by using the cartons and cushioning material
provided with the product.
Vertically move the product during transport. The screen or other components are easily
broken if the product is moved by an improper way.
Before you move the product, disconnect all external connections and separate all toppling
preventing products. Move the product carefully to prevent it from being hit or squeezed,
especially the screen, which may cause injury if broken.
Do not cover or block up any vents on the product.
Any overheated components may cause fire, damage the product, and shorten the service
life.
Do not lay the product down where the venting surface will be covered.
Do not install the product on a carpet or cloth.
Do not use a cloth such as table cloth to cover the product.
WARNING
CAUTION

viii
Keep away from the product when you use a radio.
The product complies with the international EMI standard to pervent radio interference.
However, interference may still exist and causes noise in the radio. If noise occurs in the radio,
try the following solutions.
Adjust the direction of the radio antenna to avoid the interference from the product.
Keep the radio away from the product.
Screen glass is broken or falls off.
In case of screen glass breakage, keep all personnel 3 meters away from the screen to ensure
safety.
Do not perform any installation or disassembly when the screen glass is broken or falls off.
Use the battery correctly.
Galvanic corrosion, electric leakage, and even fire may be caused by improper battery usage.
It is recommended to use the designated type of battery and install the battery by correct
electrodes (positive and negative).
Do not install and use new battery with a used one.
Take out the battery if the remote control is not used for a long period.
Do not expose the battery to overheated environments such as sunlight and firing.
Dispose of the used battery based on your local regulations.
Do not damage the power cable.
Do not damage, change, twist, bend, or forcibly drag the power cable.
Do not put weights (such as the product itself) on the power cable.
Do not forcibly drag the cable when you pull out the power plug. If the power cable is
damaged, please contact the local distributor to repair or replace it.
The power cable in the accessory box is for this product only. Do not use it on other
products.
Additional advice:
Use the product in an environment with comfortable lighting. It is harmful to your eyes to
watch in a too bright or too dark environment.
Relax your eyes after a period of time for watching.
Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
Adjust the volume to an appropriate level, especially at night.
Use amplifier device as the audio input source with caution. If you must use amplifier device,
the input power should not exceed the maximum of speaker power. Otherwise, the speaker
can become overpowered and damaged.
CAUTION

ix
About USB port.
Front USB 2.0 ports and rear USB 3.0/USB 2.0 ports switch connections based on signal
sources. If the current signal source is reading the data from an external product connecting to
the port, please switch the signal source after reading data is complete. Otherwise, the data or
product may be damaged.
CAUTION

1
1 Overview
1.1 Parts
Front View

2
Rear View
75"/86":
65":
1
Speakers
6
Front Buttons
2
Front Ports
7
Power Supply Plug
3
Front Ports Cover
8
Power Switch
4
Light Sensor
9
Internal PC Port (OPS)
5
Remote Control Receiver
10
Rear Ports

3
1.2 Ports
Front Ports
Front USB 2.0 ports and rear USB 3.0/USB 2.0 ports switch connections based on signal
sources. If the current signal source is reading the data from an external product connecting
to the port, please switch the signal source after reading data is complete. Otherwise, the
data or product may be damaged.
CAUTION

4
Rear Ports

5
Front Buttons
Button
Operation
Function
Short press
Go to the Home page
Short press
Return to the last menu/Exit
Short press
Open the menu
Short press
Decrease the sound volume
Long press for more than
1 second
Decrease the sound volume continuously
Short press
Increase the sound volume
Long press for more than
1 second
Increase the sound volume continuously
Short press
Power on/off
Steady on red: Powered on, not booted
Steady on white: working state
Blinking on red and white: Powering off
(Internet PC installed)

6
1.3 Remote Control
Carefully read the following instructions before using the remote control to avoid possible
faults:
Do not drop or damage the remote control.
Do not spill water or other liquids on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control directly under sunlight or near an overheating heat
source.
Button
Operation
Power On/Off
Mute/Unmute
0-9
Enter Number
Go to the Home Page
Return to Previous/Exit
Up/Down/Left/Right
Confirm/OK
Enter Whiteboard Mode
Take a Screenshot
Enable Sound Only Mode
Freeze the Current Screen, Click Again to Exit
Freeze Function
Adjust the Sound Volume
Adjust the Brightness（10 to 255）
Enter the Source Selection Page
View Currently Running Applications
Open the File Manager

7
Button
Operation
View all Pre-installed Applications
Switch Source to Internal PC
Switch Source to Display Port
HDMI
FRONT
Switch Source to HDMI Front
HDMI 1
Switch Source to HDMI 1
HDMI 2
Switch Source to HDMI 2
VGA
Switch Source to VGA
Autocorrection Screen Display (For VGA
Signal Source)
Open the Browser Application
Toggle Display Backlight Mode
Start/Exit the Screen Lock Function
Open the External Source Menu
Open the System Settings
1.4 Temperature Control
In certain special installation or operation environments, the ventilation condition of the
screen is poor and the heat dissipation efficiency is low. As a result, the internal temperature
may rise. When the internal temperature sensor detects that the temperature has reached
the threshold, the system will go to the shutdown mode to avoid any permanent damages to
the components caused by high temperature. Please check the device and environment, and
turn the power on again.

8
2 Installation Guide
2.1 Safety Precautions
Installation Environment

9
Installation Direction
Installation Height
Recommended installation height from the floor to the bottom of the screen: 700 mm/27.6
in (86"), 730 mm/28.7 in (75"), 860 mm/33.9 in (65")

10
2.2 Installation Precautions
Weight Loading
Weight of the product: 160.9 lb/73.0 kg (86"), 125.7 lb/57.0 kg (75"), 97.0 lb/44.0 kg (65")
When using a mobile stand, ensure that the weight of the product is less than the
loading capacity of the mobile stand.
When using the wall-mount bracket, ensure that the wall can support the weight of the
product. We recommend that the wall surface be reinforced and have a loading capacity
4 times of the weight of the product. Consult a professional installer for wall-mount
installation.
The company does not undertake relevant legal responsibility for any problems caused by improper
operation, if the third party mobile stand, or wall-mount bracket is beyond the scope of the product.
Do not install the product where it might be hit by a door.
Vertical installation
When installing, try to keep the product vertical. The vertical tilt range allowing for wall-
mount installation is ±3 degrees. Excessive tilt angle may cause the screen glass to fall off or
the product to collapse.
For any problem, please contact our support desk. Our company is not responsible for any damage or
losses incurred by users if the users fails to follow the instructions.

11
Ventilation
Ensure adequate ventilation and/or air conditioning environment. We recommend keeping
certain distances from the side of the product to the wall or panels. Proper space for
ventilation is shown in the following figure.
2.3 Installation
The dimensions of the four bracket mounting holes on the back panel are VESA MIS-F
compliant (86" or 75": 800 x 400 mm/31.50 x 15.75 in; 65": 600 x 400 mm/23.62 x 15.75 in).
Use metric M8 screws with a length of 10 mm to 15 mm (0.40 to 0.59 in) to secure the touch
screen with the mounting system. Dimensions of the mounting holes on the back panel are
shown in the following figure.
Consult a professional installer to install the display product.
75"/86":