Asus Pundit P3-PH4 User manual

Pundit P3-PH4
Barebone System
Quick Installation Guide

22
22
2Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Front panel features
PressPress
PressPress
Press
to opento open
to opento open
to open
the frontthe front
the frontthe front
the front panelpanel
panelpanel
panel
covercover
covercover
cover
Rear panel features
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard port
Cover screwCover screw
Cover screwCover screw
Cover screw Cover screwCover screw
Cover screwCover screw
Cover screw
PS/2 mouse portPS/2 mouse port
PS/2 mouse portPS/2 mouse port
PS/2 mouse port
Parallel portParallel port
Parallel portParallel port
Parallel port
Air ventsAir vents
Air ventsAir vents
Air vents
IEEE 1394a portIEEE 1394a port
IEEE 1394a portIEEE 1394a port
IEEE 1394a port
LAN (RJ-45) portLAN (RJ-45) port
LAN (RJ-45) portLAN (RJ-45) port
LAN (RJ-45) port
Voltage selectorVoltage selector
Voltage selectorVoltage selector
Voltage selector
Metal bracket lockMetal bracket lock
Metal bracket lockMetal bracket lock
Metal bracket lock
Power connectorPower connector
Power connectorPower connector
Power connector
VGA portVGA port
VGA portVGA port
VGA port
Serial portSerial port
Serial portSerial port
Serial port USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
8-channel8-channel
8-channel8-channel
8-channel
audio portsaudio ports
audio portsaudio ports
audio ports PCI slot metal bracketsPCI slot metal brackets
PCI slot metal bracketsPCI slot metal brackets
PCI slot metal brackets
Power fan ventsPower fan vents
Power fan ventsPower fan vents
Power fan vents
Power buttonPower button
Power buttonPower button
Power button
CloseClose
CloseClose
Close OpenOpen
OpenOpen
Open
Optical driveOptical drive
Optical driveOptical drive
Optical drive
eject buttoneject button
eject buttoneject button
eject button
Optical driveOptical drive
Optical driveOptical drive
Optical drive
bay coverbay cover
bay coverbay cover
bay cover
HDD LEDHDD LED
HDD LEDHDD LED
HDD LED
Power LEDPower LED
Power LEDPower LED
Power LED
IEEE 1394a portIEEE 1394a port
IEEE 1394a portIEEE 1394a port
IEEE 1394a port
Headphone portHeadphone port
Headphone portHeadphone port
Headphone port
Microphone portMicrophone port
Microphone portMicrophone port
Microphone port
Card reader LEDCard reader LED
Card reader LEDCard reader LED
Card reader LED
Memory StickMemory Stick
Memory StickMemory Stick
Memory Stick
®®
®®
®
//
//
/
Pro™ card slotPro™ card slot
Pro™ card slotPro™ card slot
Pro™ card slot SmartMediaSmartMedia
SmartMediaSmartMedia
SmartMedia
®®
®®
®
card slotcard slot
card slotcard slot
card slot
CompactFlashCompactFlash
CompactFlashCompactFlash
CompactFlash
®®
®®
®
card slotcard slot
card slotcard slot
card slot
Secure Digital™/Secure Digital™/
Secure Digital™/Secure Digital™/
Secure Digital™/
MultimediaCard slotMultimediaCard slot
MultimediaCard slotMultimediaCard slot
MultimediaCard slot
Front panel coverFront panel cover
Front panel coverFront panel cover
Front panel cover
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports

33
33
3
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Internal components
1. 5.25-inch empty optical drive bay
2. Front panel cover
3. Optical drive lock
4. Hard disk drive bays
5. Hard disk drive lock
6. Power supply unit
7. PCI Express x1 slot
8. PCI slots
9. PCI Express x16 slot
10. ASUS motherboard
11. Metal bracket lock
12. LGA775 socket
13. DIMM sockets
Selecting the voltage
The system’s power supply unit has
a 115 V/230 V voltage selector
switch located beside the power
connector. Use this switch to select
the appropriate system input voltage
according to the voltage supply in
your area.
If the voltage supply in your area is
100-127 V, set the switch to 115 V.
If the voltage supply in your area is
200-240 V, set the switch to 230 V.
1010
1010
10
1212
1212
12
11
11
133
33
3
11
11
1
22
22
2
66
66
6
44
44
4
11
11
111
11
1
99
99
9
77
77
7
33
33
3
55
55
5
88
88
8

44
44
4Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
3. Pull the cover.
2. Remove the cover screws.
Removing the cover
1. Locate two cover screws.
4. Lift the cover, then set aside.
Removing the front panel assembly
1. Locate the front
panel assembly
hooks.
2. Pull the hooks
outward to remove.
5. Lift the expansion card lock to
a 90º-100º angle.
6. Lift the chassis support
bracket, then remove.

55
55
5
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Installing a CPU
1. Locate the CPU socket. 2. Unlock the load lever.
Load leverLoad lever
Load leverLoad lever
Load lever
Retention tabRetention tab
Retention tabRetention tab
Retention tab
5. Carefully push the PnP cap
from the load plate window to
remove.
6. Install the CPU, noting the
position of the gold triangle as
shown.
BB
BB
B
AA
AA
A
AA
AA
A
3. Lift the load lever. 4. Lift the load plate.

66
66
6Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
8. Lock the load lever.7. Close the load plate.
Installing the CPU fan and heatsink assembly
1. Place the heatsink on top of
the installed CPU.
2. Drive four screws into the fan
holes to secure the fan to the
motherboard.
3. Connect the CPU fan cable.
Installing a DIMM
1. Locate the DIMM sockets in
the motherboard.
2. Unlock a DIMM socket by
pressing the retaining clips
outward.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket. DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notch
1
2
1

77
77
7
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
1. Remove the metal cover
opposite the slot that you
intend to use.
2. Insert the card connector to
the slot, then press the card
firmly until it fits in place.
Installing an expansion card
Installing an optical drive
1. Drive a screw on the top right
screw hole on both sides of
the drive.
2. Connect the IDE and audio
cable at the back of the drive.
3. Push the drive all the way into
the bay until the drive lock clicks.
4. Connect a 4-pin power plug
from the power supply unit to
the power connector at the
back of the drive.
Installing a SATA hard disk drive
1. Drive two screws with rubber
washers on both sides of the
drive.
2. Connect the SATA signal and
power plug at the back of the
drive.
Power cablePower cable
Power cablePower cable
Power cable
and plugand plug
and plugand plug
and plug
Signal cableSignal cable
Signal cableSignal cable
Signal cable
and plugand plug
and plugand plug
and plug
Rubber washerRubber washer
Rubber washerRubber washer
Rubber washer

88
88
8Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
3. Place the HDD on the tray. 4. When the HDD screws align,
push the drive on the bay.
HDD screw lockHDD screw lock
HDD screw lockHDD screw lock
HDD screw lock
1. Replace the front panel
assembly.
3. Insert the cover hooks to the
holes on the chassis side.
2. Reinstall the metal chassis
support and the expansion
card lock.
Replacing the covers
4. Push the cover to the direction
of the front panel, then
replace the cover screws.