Asus P5SD1-FM2 User manual

ASUS P5SD1-FM2 Manual
http://www.manuallib.com/file/2595652
From ManualLib.com
ManualLib.com collects and classifies the global product
instrunction manuals to help users access anytime and
anywhere, helping users make better use of products.
Home: http://www.manuallib.com/ Chinese: http://www.shuomingshuku.com/
This Manual: http://www.manuallib.com/file/2595652

Motherboard
P5SD1-FM2
This Manual: http://www.manuallib.com/file/2595652

ii
Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTYOFANYKIND,EITHEREXPRESSOR
IMPLIED,INCLUDINGBUTNOTLIMITEDTOTHE IMPLIED WARRANTIES ORCONDITIONSOF
MERCHANTABILITYORFITNESS FOR A PARTICULARPURPOSE.INNOEVENT SHALL ASUS, ITS
DIRECTORS,OFFICERS,EMPLOYEESORAGENTS BELIABLEFORANYINDIRECT,SPECIAL,
INCIDENTAL,OR CONSEQUENTIALDAMAGES(INCLUDINGDAMAGES FORLOSSOF PROFITS,LOSS
OFBUSINESS,LOSS OF USE OR DATA, INTERRUPTION OFBUSINESSANDTHELIKE),EVEN IF ASUS
HASBEEN ADVISEDOFTHEPOSSIBILITY OFSUCHDAMAGES ARISING FROMANYDEFECT OR
ERRORIN THISMANUAL ORPRODUCT.
SPECIFICATIONSAND INFORMATIONCONTAINEDIN THISMANUALAREFURNISHED FOR
INFORMATIONALUSE ONLY, AND ARE SUBJECT TO CHANGEAT ANY TIME WITHOUT NOTICE, AND
SHOULDNOT BE CONSTRUEDASA COMMITMENT BYASUS.ASUS ASSUMES NORESPONSIBILITY
ORLIABILITYFOR ANY ERRORS OR INACCURACIES THAT MAYAPPEARINTHISMANUAL,
INCLUDINGTHE PRODUCTSANDSOFTWAREDESCRIBEDIN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
E1951
First Edition V1
March 2005
This Manual: http://www.manuallib.com/file/2595652

iii
Contents
Notices ........................................................................................................ vi
Safety information.................................................................................... vii
P5SD1-FM2 specifications summary ..................................................... viii
Chapter 1: Hardware information
1.1 Before you proceed ................................................................... 1-2
1.2 Motherboard overview............................................................... 1-3
1.2.1 Placement direction .................................................... 1-3
1.2.2 Screw holes .................................................................. 1-3
1.2.3 Motherboard layout .................................................... 1-4
1.2.4 Layout Contents.......................................................... 1-5
1.3 Central Processing Unit (CPU) .................................................. 1-7
1.3.1 Installing the CPU ........................................................ 1-7
1.3.2 Installing the CPU heatsink and fan ....................... 1-10
1.3.3 Uninstalling the CPU heatsink and fan ................... 1-12
1.4 System memory ...................................................................... 1-14
1.4.1 DIMM sockets location ............................................. 1-14
1.4.2 Memory Configurations ........................................... 1-14
1.4.3 Installing a DIMM ....................................................... 1-17
1.4.4 Removing a DIMM ..................................................... 1-17
1.5 Expansion slots ........................................................................ 1-18
1.5.1 Installing an expansion card .................................... 1-18
1.5.2 Configuring an expansion card ............................... 1-18
1.5.3 Interrupt assignments ............................................. 1-19
1.5.4 PCI slots..................................................................... 1-20
1.5.5 PCI Express x16 slot ................................................ 1-20
1.6 Jumpers .................................................................................... 1-21
1.7 Connectors............................................................................... 1-25
1.7.1 Rear panel connectors ............................................. 1-25
1.7.2 Internal connectors .................................................. 1-27
This Manual: http://www.manuallib.com/file/2595652

iv
Contents
Chapter 2: BIOS setup
2.1 Managing and updating your BIOS ........................................... 2-2
2.1.1 Creating a bootable floppy disk ................................ 2-2
2.1.2 ASUS EZ Flash utility................................................... 2-3
2.1.3 AFUDOS utility ............................................................. 2-4
2.1.4 ASUS CrashFree BIOS 2 utility ................................... 2-6
2.2 BIOS setup program ................................................................ 2-10
2.2.3 Navigation keys ........................................................ 2-11
2.2.1 BIOS menu screen .................................................... 2-11
2.2.2 Menu bar.................................................................... 2-11
2.2.4 Menu items................................................................ 2-12
2.2.5 Sub-menu items ....................................................... 2-12
2.2.6 Configuration fields.................................................. 2-12
2.2.7 Pop-up window ......................................................... 2-12
2.2.8 Scroll bar ................................................................... 2-12
2.2.9 General help .............................................................. 2-12
2.3 Main menu ................................................................................ 2-13
2.3.1 System Time ............................................................. 2-13
2.3.2 System Date ............................................................. 2-13
2.3.3 Legacy Diskette A.................................................... 2-13
2.3.4 Primary, Secondary, Third, and Fourth
IDE Master/Slave ...................................................... 2-14
2.3.5 OnBoard PCI S-ATA Controller ................................ 2-15
2.3.6 System Information.................................................. 2-16
2.4 Advanced menu....................................................................... 2-17
2.4.1 CPU Configuration .................................................... 2-18
2.4.2 Chipset....................................................................... 2-19
2.4.3 Onboard Devices Configuration.............................. 2-22
2.4.4 PCIPnP ....................................................................... 2-23
2.4.5 USB Configuration .................................................... 2-25
This Manual: http://www.manuallib.com/file/2595652

v
Contents
2.5 Power menu ............................................................................. 2-26
2.5.1 ACPI Aware O/S........................................................ 2-26
2.5.2 Suspend Mode .......................................................... 2-26
2.5.3 Repost Video on S3 Resume .................................. 2-26
2.5.4 ACPI 2.0 Support...................................................... 2-26
2.5.5 ACPI APIC Support.................................................... 2-26
2.5.6 APM Configuration.................................................... 2-27
2.5.7 Hardware Monitor ..................................................... 2-28
2.6 Boot menu................................................................................ 2-30
2.6.1 Boot Settings Configuration ................................... 2-30
2.6.2 Security ..................................................................... 2-32
2.7 Exit menu.................................................................................. 2-34
This Manual: http://www.manuallib.com/file/2595652

vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
ICES-003.
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
This Manual: http://www.manuallib.com/file/2595652

vii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal cables
are connected. If possible, disconnect all power cables from the existing
system before you add a device.
• Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you
are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read
all the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
This Manual: http://www.manuallib.com/file/2595652

viii
P5SD1-FM2 specifications summary
CPU
Chipset
Front Side Bus
Memory
Expansion slots
Storage
Audio
LAN
USB
IEEE 1394
BIOS features
Special features
Rear panel
(continued on the next page)
LGA775 socket for Intel
®
Pentium
®
4/Celeron processor
Compatible with Intel
®
Performance Universal FMB
Supports Intel
®
Hyper-Threading Technology
Northbridge:SiS 649
Southbridge: SiS 965
800/533 MHz
2 x 184-pin DIMM sockets support unbufferred non-ECC
400/333 MHz DDR SDRAM memory modules
1 x PCI Express x16 slot for discrete graphics card
3 x PCI slots
SiS 965 Southbridge supports:
- 4 x Ultra DMA 100/66/33 hard disk drives
- 4 x Serial ATA hard disk drives with RAID 0, RAID 1,
RAID 0+1 (10), and JBOD configuration
ADI AD1888 SoundMax
®
6-channel CODEC
S/PDIF out interface support
Realtek
®
RTL 8201CL 10/100 Mbps LAN PHY
Supports up to 8 USB 2.0 ports
VT6307 controller supports:
- 2 x IEEE 1394a ports
4 Mb LPC Flash ROM, AMI BIOS, Green, PnP, DMI2.0,
SM BIOS 2.3, WfM2.0, ACPI 2.0a
ASUS Q-Fan 1.5
ASUSEZ Flash
1 x PS/2 mouse port
1 x PS/2 keyboard port
1 x IEEE 1394a port
1 x Parallel port
1 x LAN (RJ-45) port
4 x USB 2.0 ports
1 x Serial port
1 x Coaxial S/PDIF port
6-channel audio ports
This Manual: http://www.manuallib.com/file/2595652

ix
1 x Floppy disk drive connector
1 x Power LED connector
2 x IDE connectors
4 x Serial ATA connectors
1 x CPU fan connector
1 x Chassis fan connector
1 x Speaker out connector
2 x USB 2.0 connectors
1 x 24-pin ATX power connector
1 x 4-pin ATX 12 V power connector
1 x Internal audio connector
1 x Front panel audio connector
1 x System panel connector
Device drivers
uATX form factor: 9.6 in x 9.0 in (24.4 cm x 23 cm)
P5SD1-FM2 specifications summary
Internal
connectors
Support CD
contents
Form factor
*Specifications are subject to change without notice.
This Manual: http://www.manuallib.com/file/2595652

x
This Manual: http://www.manuallib.com/file/2595652

1
Hardware
information
This chapter lists the hardware setup
procedures that you have to perform
when installing system components.
It includes description of the jumpers
and connectors on the motherboard.
This Manual: http://www.manuallib.com/file/2595652

1-2 Chapter 1: Hardware information
1.1 Before you proceed
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any
component.
• Use a grounded wrist strap or touch a safely grounded object or a
metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
•Before you install or remove any component, ensure
that the ATX power supply is switched off or the
power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals,
and/or components.
This Manual: http://www.manuallib.com/file/2595652

ASUS P5SD1-FM2 1-3
P5SD1-FM2
®
1.2 Motherboard overview
Before you install the motherboard, study the configuration of your chassis
to ensure that the motherboard fits into it. Refer to the chassis
documentation before installing the motherboard.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
Do not overtighten the screws! Doing so can damage the motherboard.
1.2.1 Placement direction
When installing the motherboard, make sure that you place it into the
chassis in the correct orientation. The edge with external ports goes to the
rear part of the chassis as indicated in the image below.
1.2.2 Screw holes
Place six (6) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Place this side towards
the rear of the chassis
This Manual: http://www.manuallib.com/file/2595652

1-4 Chapter 1: Hardware information
1.2.3 Motherboard layout
P5SD1-FM2
CR2032 3V
Lithium Cell
CMOS Power
Super
I/O
4Mb
BIOS
ATX12V
FLOPPY
KBPWR
USB78USB56
PCI3
SiS
965
DDR DIMM1 (64 bit,184-pin module)
CPU_FAN
PRI_IDE
AD1888
SATA4
VIA
VT6307
PS/2KBMS
T: Mouse
B: Keyboard
LAN_USB34
®
DDR DIMM2 (64 bit,184-pin module)
EATXPWR
CHA_FAN
PCI2
PCI1
PCIEX16
SATA2
Below:Mic In
Center:Line Out
Top:Line In
F_USB12
F_PANEL
AUX
FP_AUDIO
PWDSKP
BIOSREC
SPEAKER
PLED
SEC_IDE
SiS
649
CLRTC
PARALLEL PORT
COM1
SPDIF_O
LGA775
USBPW12
USBPW34
USBPW78
USBPW56 BUZZER
IE1394_2
RTL8201CL
SATA3
SATA1
This Manual: http://www.manuallib.com/file/2595652

ASUS P5SD1-FM2 1-5
1.2.4 Layout Contents
Slots Page
1. DDR DIMM slots 1-14
2. PCI slots 1-20
3. PCI Express slot 1-20
Jumpers Page
1. Clear RTC RAM (CLRTC) 1-21
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) 1-22
3. Keyboard power (3-pin KBPWR) 1-23
4. Clear password (3-pin PWSKP) 1-23
5. BIOS Recovery (3-pin BIOSREC) 1-24
Rear panel connectors Page
1. PS/2 mouse port 1-25
2. Parallel port 1-25
3. LAN (RJ-45) port 1-25
4. Rear Speaker Out port 1-25
5. Side Speaker Out port 1-25
6. Line In port 1-25
7. Line Out port 1-25
8. Microphone port 1-25
9. USB 2.0 ports 3 and 4 1-26
10. Serial port 1-26
11. USB 2.0 ports 1 and 2 1-26
12. PS/2 keyboard port 1-26
This Manual: http://www.manuallib.com/file/2595652

1-6 Chapter 1: Hardware information
Internal connectors Page
1. Floppy disk drive connector (34-1 pin FLOPPY) 1-27
2. Power LED connector (3-1 pin PLED) 1-27
3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) 1-28
4. Serial ATA connectors (7-pin SATA1 [black], SATA2 [black]) 1-29
5. CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) 1-30
6. Speaker out connector (4-pin SPEAKER) 1-30
7. USB connectors (10-1 pin USB56, USB78) 1-31
8. ATX power connector (24-pin EATXPWR) 1-32
9. ATX 12V power connector (4-pin ATX12V) 1-32
10. Internal audio connector (4-pin AUX) 1-33
11. Front panel audio connector (10-1 pin FP_AUDIO) 1-33
12. System panel connector (10-1 pin F_PANEL) 1-34
- System power LED (Green 2-pin PLED)
- Hard disk activity (Red 2-pin HDLED)
- Power/Soft-off button(Black 2-pin PWRSW)
- Reset switch (Blue 2-pin RESET)
This Manual: http://www.manuallib.com/file/2595652

ASUS P5SD1-FM2 1-7
1.3.1 Installing the CPU
To install a CPU:
1. Locate the CPU socket on the motherboard.
1.3 Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA775 socket designed for
the Intel
®
Pentium
®
4 processor in the 775-land package.
Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.
• Your boxed Intel
®
Pentium
®
4 LGA775 processor package should
come with installation instructions for the CPU, heatsink, and the
retention mechanism. If the instructions in this section do not match
the CPU documentation, follow the latter.
• Upon purchase of the motherboard, make sure that the PnP cap is
on the socket and the socket contacts are not bent. Contact your
retailer immediately if the PnP cap is missing, or if you see any
damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
• Keep the cap after installing the motherboard. ASUS will process
Return Merchandise Authorization (RMA) requests only if the
motherboard comes with the cap on the LGA775 socket.
• The product warranty does not cover damage to the socket
contacts resulting from incorrect CPU installation/removal, or
misplacement/loss/incorrect removal of the PnP cap.
P5SD1-FM2
®
P5SD1-FM2 CPU Socket 775
This Manual: http://www.manuallib.com/file/2595652

1-8 Chapter 1: Hardware information
3. Lift the load lever in the
direction of the arrow to a 135º
angle.
4. Lift the load plate with your
thumb and forefinger to a
100º angle (A), then push
the PnP cap from the load
plate window to remove (B).
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
5. Position the CPU over
the socket, making
sure that the gold
triangle is on the
bottom-left corner of
the socket. The
socket alignment key
should fit into the
CPU notch.
Alignment key
Gold triangle mark
Load plate
A
B
2. Press the load lever with your thumb (A), then move it to the left (B)
until it is released from the retention tab.
Retention tab
Load lever
This side of the
socket box should
face you.
PnP cap
A
B
This Manual: http://www.manuallib.com/file/2595652

ASUS P5SD1-FM2 1-9
Notes on Intel
®
Hyper-Threading Technology
• This motherboard supports Intel
®
Pentium
®
4 CPUs in the 775-land
package with Hyper-Threading Technology.
• Hyper-ThreadingTechnologyis supported under Windows
®
XPand Linux
2.4.x(kernel) and later versions only.Under Linux,use the Hyper-Threading
compiler to compile the code. If you are using any other operating systems,
disablethe Hyper-ThreadingTechnologyitem inthe BIOS to ensure system
stabilityandperformance.
• InstallingWindows
®
XPServicePack2 orlaterversionisrecommended.
• Makesureto enable the Hyper-ThreadingTechnologyitem in BIOS before
installingasupported operating system.
• Formore information on Hyper-ThreadingTechnology, visit www.intel.com/
info/hyperthreading.
To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel
®
Pentium
®
4 CPU that supports Hyper-Threading
Technology.
2. Power up the system and enter the BIOS Setup (see Chapter 2: BIOS
setup). Under the Advanced Menu, make sure that the item
Hyper-Threading Technology is set to Enabled. The item appears only
if you installed a CPU that supports Hyper-Threading Technology.
3. Reboot the computer.
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
6. Close the load plate (A), then
push the load lever (B) until
it snaps into the retention
tab.
A
B
This Manual: http://www.manuallib.com/file/2595652