Asus WL-500GP_V2 User manual

User Manual
WL-500gP V2 Wireless Router
E3209/ October 2007
®

Manufacturer Contact Information
ASUSTeK COMPUTER INC. (Asia-Pacic)
Company address: 15 Li-Te Road, Beitou, Taipei 11259
General (tel): [phone] Web site address: www.asus.com.tw
General (fax): [phone] General email: [email protected]
ASUS COMPUTER INTERNATIONAL (America)
Company address: 44370 Nobel Drive, Fremont, CA 94538, USA
General (fax): [phone] Web site address: usa.asus.com
Technical support
General support: [phone] Support (fax): [phone]
Online support: http://vip.asus.com/eservice/techserv.aspx
ASUS COMPUTER GmbH (Germany & Austria)
Company address: Harkort Str. 25, D-40880 Ratingen, Germany
General (tel): [phone] Web site address: www.asuscom.de
General (fax): [phone] Online contact: www.asuscom.de/sales
Technical support
Components: [phone] Online support: www.asuscom.de/support
Notebook: [phone] Support (fax): [phone]

WL-500gP V2 Wireless Router User Manual
1
Table of contents
1. Package contents.................................................................................3
2. Connecting ADSL modem and wireless router .................................3
1) Cable connection ...............................................................................3
2) Status indicators ................................................................................4
3) Wall mount option ..............................................................................4
3. Getting started......................................................................................5
1) Wired connection ...............................................................................5
2) Wireless Connection..........................................................................5
3) Setting IP address for wired or wireless client ...................................5
4) Conguring the wireless router ..........................................................6
5) Quick setup .......................................................................................7
4. Wireless router features ....................................................................12
1) Choosing an appropriate operation mode .......................................12
2) Setting up wireless encryption ........................................................13
3) Setting up virtual server in your LAN ...............................................14
4) Setting up virtual DMZ in your LAN .................................................15
5) Setting up DDNS .............................................................................15
6) Setting up Bandwidth Management.................................................21
5. Application features ...........................................................................23
1) Sharing USB storage .......................................................................23
2) Setting up FTP site ..........................................................................25
3) Sharing USB printer.........................................................................26
6. Setting up using ASUS utility ................................................................ 30
1) Utility Installation for WL-500gP V2 .................................................30
2) EZSetup...........................................................................................31

WL-500gP V2 Wireless Router User Manual
2
7. Congure WL500gP V2 under Vista OS ...........................................36
8. Troubleshooting .................................................................................48
9. Appendix .............................................................................................50

WL-500gP V2 Wireless Router User Manual
3
2. Connecting ADSL modem and wireless router
1. Package contents
• WL-500gP V2 wireless router x 1
• Power adapter x 1
• Utility CD x 1
• RJ45 cable x 1
• Quick Start Guide x 1
1) Cable connection
1
Modem
Wall telephone outlet
Wall power outlet
Phone
Power
2
Wall power outlet
ASUS Wireless Router
3
Modem
Wall telephone outlet
Wall power outlet
Phone
Power
ASUS Wireless Router
LAN
LAN
Power
Power
WAN

WL-500gP V2 Wireless Router User Manual
4
2) Status indicators
PWR (Power)
Off No power
On System ready
Flashing-slow Firmware upgrade failed
Flashing-quick EZsetup processing
AIR (Wireless Network)
Off No power
On Wireless system ready
Flashing Transmitting or receiving data (wireless)
WAN (Wide Area Network)
Off No power or no physical connection
On Has physical connection to an Ethernet network
Flashing Transmitting or receiving data (through Ethernet cable)
LAN 1-4 (Local Area Network)
Off No power or no physical connection
On Has physical connection to an Ethernet network
Flashing Transmitting or receiving data (through Ethernet cable)
3) Wall mount option
Out of the box, ASUS WL-500gP V2 Wireless
Router is designed to sit on a raised at surface like
a le cabinet or book shelf. The unit may also be
converted for mounting to a wall or ceiling.
Follow these steps to mount the ASUS Wireless
Router to a wall:
1. Look on the underside for the two mounting
hooks.
2. Mark two upper holes in a at surface.
3. Tighten two screws until only 1/4'' is showing.
4. Latch the hooks of the ASUS Wireless Router onto the screws.
Note: Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the
screws or if it is too loose.
PWR
AIR WANLAN

WL-500gP V2 Wireless Router User Manual
5
The ASUS WL-500gP V2 Wireless Router can meet various working scenarios with proper
conguration. The default settings of the wireless router may need change so as to meet your
individual needs. Therefore, before using the ASUS Wireless Router, check the basic settings to
make sure they all work in your environment.
ASUS provides a utility named EZSetup for fast wireless conguration. If you would like to use
EZSetup for your wireless network conguration, refer to chapter 6 for details.
Note: Wired connection for initial conguration is recommended to avoid possible
setup problems due to wireless uncertainty.
1) Wired connection
The ASUS WL-500gP V2 Wireless Router is supplied with an Ethernet cable in the package.
Since the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use
either straight-through or crossover cable for wired connection. Plug one end of the cable to the
LAN port on the rear panel of the router and the other end to the Ethernet port on your PC.
2) Wireless Connection
For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer
to your wireless adapter user manual for wireless connection procedures. By default, the
SSID of ASUS Wireless Router is “default” (in lower case), encryption is disabled and open
system authentication is used.
3) Setting IP address for wired or wireless client
To access WL-500gP V2 Wireless Router, you must have correct TCP/IP settings on your wired or
wireless clients. Set the IP addresses of the clients within the same subnet of WL-500gP V2.
Getting IP address Automatically
The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your
PC get IP address automatically from the ASUS Wireless Router.
Note: Before rebooting your PC, switch ON the
wireless router and make sure the router is in ready
state.
Setting up IP address Manually
To set IP address manually, you need to know the default
settings of the ASUS Wireless Router:
• IP address 192.168.1.1
• Subnet Mask 255.255.255.0
3. Getting started

WL-500gP V2 Wireless Router User Manual
6
To set up the connection with a manually assigned
IP address, the address of your PC and the wireless
router must be within the same subnet:
• IP address: 192.168.1.xxx (xxx can be any
number between 2 and 254. Make sure the IP
address is not used by other device)
• Subnet Mask: 255.255.255.0 (same as WL-500gP
V2)
• Gateway: 192.168.1.1 (IP address of WL-500gP V2)
• DNS: 192.168.1.1 (WL-500gP V2), or assign a
known DNS server in your network.
4) Conguring the wireless router
Follow the steps below to enter the Web conguration interface of WL-500gP V2.
Defaults
User name: admin Password: admin
Enter the following address in your
web browser: http://192.168.1.1
After logging in, you can see the ASUS Wireless Router home page.
The homepage displays quick links to congure the main features of the wireless router.
2
1
3

WL-500gP V2 Wireless Router User Manual
7
1. Select your time zone and click
Next.
5) Quick setup
To start quick setup, click Next to enter the “Quick Setup”
page. Follow the instructions to setup the ASUS Wireless
Router.
2. ASUS wireless router supports
five types of ISP services: cable,
PPPoE, PPTP, static WAN IP,
and Telstra BigPond. Select your
connection type and click Next to
continue.
Cable or dynamic IP user
If you are using services provided by
cable ISP, select Cable Modem or other
connection that gets IP automatically.
If your ISP provides you hostname, MAC
address, and heartbeat server address,
fill these information into the boxes on
the setting page; if not, click Next to skip
this step.
PPPoE user
If you use PPPoE service, select ADSL
connection that requires username
and password. It is known as PPPoE.
You need to input the username and
password provided by your ISP. Click
Next to continue.

WL-500gP V2 Wireless Router User Manual
8
PPTP user
If you are using PPTP services, select ADSL
connection that requires username,
password and IP address. Fill in the
username, password and IP address
provided by your ISP into the fields. Click
Next to continue.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select ADSL
or other connection type that uses static
IP address. Input the IP address, subnet
mask, and default gateway provided by your
ISP. You can specify DNS servers, or get
DNS information automatically.
herk036@adsl-comfort
3. After the connection type setting is
complete, you are to set up your wireless
interface. Specify to your wireless router
an SSID (Service Set Identifier), which
is a unique identier attached to packets
sent over WLAN. This identier emulates
a password when a device attempts to
communicate with your wireless router
via WLAN.
If you want to protect transmitted data, select a Security Level to enable encryption methods.
Medium: Only users with the same WEP key settings can connect to your wireless router
and transmit data using 64bits or 128bits WEP key encryption.
High: Only users with the same WPA-PSK Key settings can connect to your wireless router
and transmit data using TKIP encryption.

WL-500gP V2 Wireless Router User Manual
9
4. Input four sets of WEP keys in the WEP
Key fields (10 hexadecimal digits for
WEP 64bits, 26 hexadecimal digits
for WEP 128bits). You can also let the
system generate the keys by inputting
a Passphrase. Record the Passphrase
and the WEP keys in your notebook,
then click Finish.
For example, if we select WEP 64bits
encryption mode and input 11111 as
the Passphrase, the WEP Keys are
generated automatically.
5. Click Save&Restart to restart the
wireless router and activate the new
settings.
6. Connect to the wireless router via wireless.
To connect the wireless router from a wireless client, you can use Windows®Wireless
Zero Conguration service to set up the connection. If you use ASUS Wireless Card on
your computer, you can use the One Touch Wizard utility supplied in WLAN Card support
CD for wireless connection.
Conguring ASUS WLAN Card with One Touch Wizard
If you have installed ASUS wireless card together with its utilities and drivers on your PC, click
Start -> Programe -> ASUS Utility-> WLAN Card -> One Touch Wizard to launch the One
Touch Wizard utility.

WL-500gP V2 Wireless Router User Manual
10
3) Set the authentication and encryption of
your WLAN card the same with those at
WL-500gP V2. In the previous steps the
Key Length is 64 bits, Passphrase is
11111 Click Next to continue.
1) Select Connect to an existing wireless
LAN (Station) radio button and click
Next to continue.
2) One Touch Wizard searches and displays
the available APs in the Available
Networks list. Select WL-500gP V2 and
press Next to continue.
4) It takes several seconds for the wireless
card to associate with WL-500gP V2.
Press Next to setup TCP/IP for your
WLAN Card.
5) Setup the IP address of the WLAN Card
according to your network condition.
After the setup is complete, click Finish
to exit the One Touch Wizard.

WL-500gP V2 Wireless Router User Manual
11
7. Conguring advanced features
To view and adjust other settings of the wireless router,
enter the Web configuration page of WL-500gP V2.
Click on items on the menu to open a submenu and
follow the instructions to setup the router. Tips show up
when you move your cursor over each item.
Conguring WLAN card with Windows®WZC service
If you use non-ASUS wireless card, you can set up the wireless connection with Windows®
Wireless Zero Conguration (WZC) service.
2) Input the 10-digit keys you have set on
the wireless router and click Connect.
The connection is complete within
several seconds.
1) Double-click the wireless network icon on
the task bar to view available networks.
Select your wireless router and click
Connect.

WL-500gP V2 Wireless Router User Manual
12
4. Wireless router features
This chapter provides setup examples of some frequently used router features. You
can setup these features via your Web browser.
1) Choosing an appropriate operation mode
ASUS WL-500gP V2 Wireless Router supports three
operation modes: home gateway, router, and access point.
Click System Setup -> Operation mode to open the
conguration page.
Home gateway mode is for home or SOHO users who
want to connect to their ISPs for Internet services. In this operation mode, NAT,
WAN connection, Internet rewall functions are supported.
Router mode is for ofce use where multiple routers and switches co-exist.
You can set up routing policies in this mode; however, NAT function is disabled.
Access point mode works when you setup WL-500gP V2 as a wireless bridge.
In this mode, all Ethernet ports on WL-500gP V2 (4 LAN ports and 1 WAN
port) are recognized as LAN ports. WAN connection, NAT, and Internet rewall
functions are disabled in access point mode.
Select a proper mode which complies to your network scenario and press Apply
button, and then you can continue to setup advanced features for your WL-500gP
V2.

WL-500gP V2 Wireless Router User Manual
13
2) Setting up wireless encryption
WL-500gP V2 provides a set of encryption and
authentication methods to meet the different demands
of home, SOHO, and enterprise users. Before setting up
encryption and authentication for WL-500gP V2, contact
your network administrator for advice.
Click Wireless -> Interface to open the conguration page.
Encryption
The encryption modes supported by WL-500gP V2 are: WEP (64bits), WEP
(128bits), TKIP, AES, and TKIP+AES.
WEP stands for Wired Equivalent Privacy, it uses 64bits or 128bits static keys
to encrypt the data for wireless transmission. To setup WEP keys, set WEP
Encryption to WEP-64bits or WEP-128bits, then manually type in four sets
WEP Keys (10 hexadicimal digits for 64-bit key or 26 hexadicimal digits for
128-bit key). You can also let the system generate the keys by entering a
Passphrase.
TKIP stands for Temporal Key Integrity Protocol. TKIP dynamically generates
unique keys to encrypt every data packet in a wireless session.
AES stands for Advanced Encryption Standard. This solution offers stronger
protection and increases the complexity of wireless encryption.
TKIP+AES is used when both WPA and WPA2 clients co-exist in the wireless
network.

WL-500gP V2 Wireless Router User Manual
14
2. Select Yes to enable virtual
server. For example, if host
192.168.1.100 is FTP server
which is to be accessed by
Internet user, it means all
packets from Internet with
destination port as 21 are to
be directed to the host. Set
Well-known Application to
FTP. Port range to 21, Local
IP to the host IP, Local Port
to 21, Protocol to TCP.
3. Click Finish.
4. Click Save & Restart to
restart the wireless router
and activate the settings.
Authentication
The authentication methods supported by WL-500gP V2 include: Open, shared
key, WPA-PSK, WPA, and Radius with 80.211x.
Open: This option disables authentication protection for wireless network. Under
Open mode, any IEEE802.11b/g client can connect to your wireless network.
Shared: This mode uses the the WEP keys currently in use for authentication.
WPA and WPA-PSK: WPA stands for WiFi-Protected Access. WPA provides two
security modes: WPA for enterprise network, and WPA-PSK for home and SOHO
users. For enterprise network, WPA uses the already existing RADIUS server for
authentication; for home and SOHO user, it provides Pre-Shared Key (PSK) for
user identication. The Pre-Shared Key consists of 8 to 64 characters.
Radius with 802.1X: Similar with WPA, this solution also uses RADIUS server
for authentication. The difference lays on the encryption mothods: WPA adopts
TKIP or AES encryption methods, while Radius with 802.1X does not provide
encryption.
When authentication and encryption are set, click Finish to save the settings and
restart the wireless router.
3) Setting up virtual server in your LAN
Virtual server is a Network Address Translation (NAT)
function which turns a computer within a LAN into a server
by allowing data packets of certain service, such as HTTP,
from Internet.
1. Click Virtual Server in NAT Setting folder to open the NAT
conguration page.

WL-500gP V2 Wireless Router User Manual
15
1. Click Virtual DMZ in the NAT Setting menu.
2. Enter the IP address of the
host and click Finish.
3. Click Save & Restart to
restart the wireless router
and activate the settings.
5) Setting up DDNS
DNS enables host who uses static IP address to associate with a domain name;
for dynamic IP user, they can also associate with a domain name via dynamic
DNS (DDNS). DDNS requires registering and account-creating at ASUS DDNS
service. The ASUS DDNS server has already recorded your
IP address information. You just set your domain name and
you can access USB Hard Disc Drive that plugged in WL-
500gP V2 via Internet.
ASUS DDNS Service
4) Setting up virtual DMZ in your LAN
To expose an internal host to Internet and make all services provided by this host
available to outside users, enable Virtual DMZ function to open all ports of the host.
This function is useful when the host plays multiple roles such as HTTP server and
FTP server. However, in doing this, your network becomes less secure.
1. Click DDNS from IP Cong folder.
2. Select Yes to enable the DDNS service.

WL-500gP V2 Wireless Router User Manual
16
3. Select WWW.ASUS.COM for detail setting. You are not necessary to key in User Name or
E-mail Address and Password or DDNS Key if you select this server. Or you can select
another website to register and apply for DDNS service. Please refer to Page 18 to see
another service setting.
4. Enter the host name then click Query. The format should be xxx.asuscomm.com. (xxx is
what you want to set up a host name)
5. You can see this message when your host name is successfully registered.

WL-500gP V2 Wireless Router User Manual
17
6. If host name’s format does not follow xxx.asuscomm.com, you will see this message. Please
re-enter your host name again.
7. If you want to change host name, please enter new host name and click Query. You can see
this message when your host name is successfully updated.
8. If the host name had been registered, you will see this message. Please re-enter your host
name again.