Atal ALR-IAQ User manual

V1.1
Quick Start Guide
LoRaWAN Compliant Sensor Device
ALR-IAQ

Welcome
Thank you for ordering a LoRaWAN wireless monitoring system.
The Atal webhosting onlinesensor can be reached at:
https://onlinesensor.nl
Your account credent ials are:

Overview
The ALR-IAQ is a stable Carbon Dioxide (CO2) and Temperature & Humidity indoor air quality
sensing device by LoRaWAN communication. It is integrated LoRa wireless technology, CO2 Sensor knowhow
and high-performance MCU solution for various IoT markets usage. With calibrated CO2 sensor module and
compensated Temperature/Humidity sensor integration, the data is ready for use. It is perfect for monitoring air
quality in schools, office buildings, greenhouses, factories, hotels, hospitals, transportation lines and anywhere
high levels of carbon dioxide are generated.
Package Check List
- ALR-IAQ *1
- Quick Start Guide *1
- Diploe Antenna *1
Product Dimensions:
n 113.57 x 80.0 x 28.79 mm (H x W x D)
Physical Introduction
Antenna
LCD Display
Micro-USB port
Figure 1

Open the housing
Please tenon on bottom of the housing with a screw driver to remove the upper cover. (Please refer to the
Figure 2 to Figure 4)
Power Supply and Jumper position for ALR-IAQ
You could choose either DC +8~24V or Micro-USB DC 5V as your power supply.
＋
Power Supply DC
+8~24V
－
Micro-USB DC 5V
Power Supply
DC power supply for CO2 Module

Cautions and Product Safety Information
Environment The following environment requirements apply to the ALR-IAQ Verifier:
Requirements • The ALR-IAQ Verifier is for indoor use only.
• The unit is evaluated for a maximum ambient temperature of 60°C
(Normal operating conditions).
• The ALR-IAQ Verifier is suitable for network telecommunication facilities.
CAUTION:
To prevent shock. No user serviceable parts inside. Refer servicing to qualified
personnel.
Equipment This includes instructions to service personnel for preventive maintenance,
Maintenance and inspection, cleaning, and replacement of parts. The ALR-IAQ Verifier contains
Service no user-serviceable parts. If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the equipment may be
impaired.
Preventing Electrostatic discharge (ESD) damage can cause complete or intermittent
Electrostatic equipment failures. EXFO recommends that you always use an ESD-preventive
Discharge wrist or ankle strap and ensure that it makes good skin contact.
Airflow ALR-IAQ is passively cooled. There are no fans or filters.
considerations
Additional Equipment is not serviced on site.
equipment
information