AT&T TL92273 User manual

This quick start guide provides you with basic instructions only.
For more complete instructions, refer to the Abridged user’s
manual provided in the package, or see the Complete user’s
manual at www.telephones.att.com/manuals.
Quick start guide
TL92273/TL92373/TL92473
Charge for at least 30 minutes
before initial settings.
Charge for 11 hours before initial
use.
•
•
1 2 3
4
INSTALLATION COMPLETED!
Keep reading for common settings and operations.
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
Plug!
Light on!
Parts checklist
Handset
(2 for TL92273)
(3 for TL92373)
(4 for TL92473)
Charger with power adapter
(1 for TL92273)
(2 for TL92373)
(3 for TL92473)
Telephone base
Telephone line cord
Telephone base power adapter
•
•
•
•
•
Battery compartment cover
(2 for TL92273)
(3 for TL92373)
(4 for TL92473)
Battery
(2 for TL92273)
(3 for TL92373)
(4 for TL92473)
Wall mount bracket
Abridged user’s manual
Quick start guide
•
•
•
•
•
Your package contains:
Plug!
Install telephone base & charger
1
Install handset battery
2
Install telephone base on the wall (optional)
3
Set the date/time before using the answering system.
Using a cordless handset:
1. Press MENU -> Press q/pto Set date/time -> Press SELECT.
2. Enter the month (MM), day (DD) and year (YY)-> Press NEXT.
3. Enter the hour (HH) and minute (MM).
4. Press q/pto choose AM or PM -> Press SAVE.
You can set the ringer volume level to one of the six levels or turn the
ringer off.
Using a cordless handset:
1. Press MENU -> Press q/pto Ringers -> Press SELECT.
2. Press SELECT to select Ringer volume.
3. Press q/pto choose the desired level -> Press SET.
Set ringer volume
5
Add a Bluetooth cell phone / headset
6
Set date and time
4
To use a Bluetooth enabled cellular phone or headset with your
telephone, you must first pair and connect your Bluetooth cellular phone
or headset with the telephone base.
Bluetooth wireless technology operates within a short range (up to 30
feet). Keep the connected device within 15 feet of the telephone base for
optimal performance.
To pair and connect a cell phone using a cordless handset:
1. Press MENU -> Press q/pto Bluetooth -> Press SELECT.
2. Press SELECT to select Add device.
3. Press SELECT to select Add cellular.
4. Disconnect the cell phone from any Bluetooth device -> Press NEXT.
5. Place the cell phone next to the telephone base.
6. Press NEXT to turn on the telephone base discoverable mode.
7. Turn on the Bluetooth feature of your cell phone and search for or
add new advices. Once your cell phone finds your AT&T phone (AT&T
DECT 6.0), press the appropriate key on your cell phone to continue
the pairing process.
Enter the cell phone passcode (typically 0000) if required ->
Press SET.
Enter the PIN (default PIN: 0000) of the telephone base into your
cell phone if required.
To pair and connect a headset using a cordless handset:
1. Press MENU -> Press q/pto Bluetooth -> Press SELECT.
2. Press SELECT to select Add device.
3. Press q/pto Add headset -> Press SELECT.
4. Disconnect your headset from any Bluetooth device -> Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press q/pto choose your headset if required -> Press SELECT.
Enter the PIN (typically 0000) of your headset if required and
press NEXT.
•
•
•
Basic steps to set up & operate your phone
Basic installation
1Install telephone base & charger
2Install handset battery
3Install telephone base on the wall (optional)
Common settings
4Set date and time
5Set ringer volume
6Add a Bluetooth cell phone / headset
7Download a cell phone directory
8Record own announcement
9Set number of rings
Common operations
10 Directory
11 Caller ID
Follow the instructions below only if you would like to mount the
telephone on a wall.
1 2
3
4 5
Click!
Plug!
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
DSL filter
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
Plug!
Click!
Align!
Align!
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles : BT183342/BT283342 (2.4V 400mAh Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine BY1142
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack / Bloc-piles : BT183342/BT283342(2.4V 400mAh Ni-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine BY1142
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles : BT183342/BT283342 (2.4V 400mAh Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine BY1142
Align!
Align!
Unplug!
Unplug!
Click!
Plug!

SETUP DONE!
Keep reading for some common operations.
Show the menu.
Select an item or save an entry
or setting in a menu.
•
•
Review the directory.
Increase the listening volume.
•
•
Review the caller ID log.
Decrease the listening volume.
•
•
Press repeatedly to review the
redial list.
Add a dialing pause while dialing
or entering a number.
•
•
Make or answer a home call.
Answer a call waiting call during
a home call.
•
•
Make a home call using
the speakerphone.
Answer a home or cell callAnswer a home or cell call
using the speakerphone.
•
•
Mute a call.
Delete a digit or character.
•
•Adjust the speaker
volume.
•
Your telephone has a built-in answering system and supports voicemail
feature offered by your telephone service provider (subscription is
required, and fees may apply).
Answering system and voicemail
To use the built-in answering system:
Refer to this Quick start guide for basic instructions. For complete
instructions, see the Abridged user’s manual in the package or the
Complete user’s manual at www.telephones.att.com/manuals.
To use the voicemail:
Press and hold 1 on the handset to dial the preset voicemail number,1 on the handset to dial the preset voicemail number,
and then enter a security code. Contact your telephone service provider
for detailed information.
The built-in answering system must be turned on to answer and
record messages.
Make or answer a cell call.
Answer an incoming CELL 1/CELL 2
call during a CELL 1/CELL 2 call.
•
•
Press and hold to set QUIET mode
or to deactive QUIET mode.
•
For more detailed instructions, please refer to the Abridged user’s manual
provided in your package, or for a full set of installation and operation
instructions, refer to the online TL92273/TL92373/TL92473
DECT 6.0 cordless telephone/answering system with BLUETOOTH® wireless
technology Complete user’s manual at www.telephones.att.com/manuals.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 [phone]. In Canada, dial
1 [phone].
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks
by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech
Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of
their respective owners.
© 2013 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Android®and Google Playand Google Play®are registered trademarks of Google Inc.
Connect to Cell™ is a trademark of Advanced American Telephones.
Printed in China. Issue 2 AT&T 04/13.
Before downloading a directory, make sure the cell phone is paired,
active, and connected to your TL92273/TL92373/TL92473.
To download a cell phone directory using a cordless handset:
1. Press MENU -> Press q/pto Bluetooth -> Press SELECT.
2. Press q/pto Download dir -> Press SELECT.
3. Press q/pto choose among Phone memory, SIM card only or Phone
and SIM -> Press SELECT.
4. Press NEXT to start downloading if necessary.
Enter the cell phone passcode if necessary, then press SET.
Press a key on your cellphone to confirm the directory download
if required.
5. Press OK to exit.
If you are using Bluetooth-enabled cell phones with Android®
OS 2.3 or above, you may also download the Connect to Cell™
application (consists of Caller ID manager and Alerts manager)
using the Google Play®Store app to extend the flexibility of your
TL92273/TL92373/TL92473. Scan the QR code on the right to
download the application.
•
•
The caller ID log stores up to 50 entries.
To review and dial a caller ID entry:
Using a cordless handset:
1. PressPress CID in idle mode -> Press q/pto scroll through
the list.
2. Press HOME or /SPEAKER to dial with the
home line.
-OR-
Press CELL 1 or CELL 2 to dial with the cell line.
To erase the missed call indicator:
Using a cordless handset:
The screens display XX missed calls when you have incoming calls that
have not been answered. When you have reviewed all the missed calls,
the missed call indicator is erased.
If you want to erase the missed call indicator without reviewing the
caller ID log, press and hold CANCEL in idle mode.
The directory stores up to 200 entries.
To add an entry in the home directory:
Using a cordless handset:
1. PressPress MENU -> Press q/pto Directory -> SELECT.
2. Press OPTION to select Home.
3. Press SELECT to select Add contact.
4. Enter a telephone number -> Press NEXT.
5. Press q/pto select Home, Cell, Work or Other -> Press NEXT.
6. Enter a name -> Press SAVE.
To review and dial a directory entry:
Using a cordless handset:
1. PressPress DIR in idle mode -> Press q/pto select the
desired directory -> Press REVIEW.
2. Press q/pto browse through the directory, or press
the dialing keys to start a name search.
3. Press HOME or /SPEAKER to call using the
home line.
-OR-
Press CELL 1 or CELL 2 to call using the cell line.
End a home or cell call.•
Handset operation Answering system operation
Download a cell phone directory
7
You can use the preset announcement to answer calls, or replace it with
your own recorded announcement.
Using a cordless handset:
1. Press MENU -> Press q/pto Answering sys -> Press SELECT.
2. Press SELECT to select Announcement.
3. Press SELECT to select Record annc.
4. Facing the handset, record your announcement and press STOP to
end recording.
Set number of rings
9
Directory
Caller ID
11
10
Record own announcement
8
You can set the answering system to answer an incoming call after 2,
3, 4, 5 or 6 rings, or toll saver. If you choose toll saver, the answering
system answers a call after two rings if you have new messages, or after
four rings when there are no new messages.
Using a cordless handset:
1. Press MENU -> Press q/pto Answering sys -> Press SELECT.
2. Press q/pto Ans sys setup -> Press SELECT.
3. Press q/pto # of rings -> Press SELECT.
4. Press q/pto choose among 6, 5, 4, 3, 2 or Toll saver ->
Press SELECT.
Repeat the playing message.
Press twice to listen to the
previous message.
•
•
Delete the playing message.•
Skip to the next message.•
Start message playback.
Stop messge playback.
•
•
Turn the answering systemTurn the answering system
on or off.
•
DIR
CID