ATD Tools 6559 User manual

ATD-6559
Masking Film Dispenser
Owner’s Manual
Features:
• Holds box firmly as you pull sheeting
• Keep sheeting clean and dry
• 8” rubber wheels allow easy movement in work area
• Stands upright for convenient storage
• Fits box lengths from 14” – 55”

1. Ensure that you have all the parts upon opening your unit.
Listed in the order as shown above:
(2) Wheels
(1) Hardware set containing:
(1) Knob (1) Lower Vertical Tube
(3) M8 Lock Nuts (1) Upper Vertical Tube
(3) M8 Bolts (1) Upper Film Holder
(3) M8 Washers (1) Lower Film Holder (Base)
(2) M10 Bolts
2. Attach the Wheels to the Lower Film Holder (Base) using the M10 Bolts
3. Attach Lower Vertical Tube to the Lower Film Holder (Base)
using an M8 Bolt, Washer and Lock Nut.
4. Slide the Upper Vertical Tube into the Lower Vertical Tube and
secure with an M8 Bolt, Washer and Lock Nut.
5. Slide Upper Film Holder over the Upper Vertical Tube as shown.
Secure with the Knob. The Knob can be loosened so that the Upper
Film Holder can slide to adjust for your lm roll. Be usre to tighten
the Knob after loading your lm roll.
6. Assembled unit.
ATD-6559 Assembly Instructions

1
2
3
4
5
6
7
8
9
10
5
5
6
6
4
8
ATD-6559
ITEM# ORDERING PART# PART DESCRIPTION
1PRT6559-01UPPER FILM HOLDER
2PRT6559-HK KNOB
3PRT6559-03 UPPER VERTICAL TUBE
4PRT6559-HK LOCK NUT
(
M8
)
5PRT6559-HK BOLT
(
M8
)
6PRT6559-HK WASHER
(
M8
)
7PRT6559-07 LOWER VERTICAL TUBE
8PRT6559-HK BOLT
(
M10
)
9PRT6559-09 WHEEL
10PRT6559-10 LOWER FILM HOLDER
(
BASE
)
*PRT6559-HK includes items 2, 4, 5, 6 and 8)
Learn more about paint and body repair on our website.