Sealey MK77 User manual

POLYMASK/MASKING PAPER DISPENSER 1 X
900MM ROLL
MODEL NO: MK77
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9 Ensurethedispenserisonareasonablyat,leveloorbeforeloading.
9 Ensurethatallttingsaretightandsecure.
8DO NOTusethedispenserforanypurposeotherthanthatforwhichitisdesigned.
2. INTRODUCTION
Singlerolldispenseraccepts900mmrollsandcanbeusedeitherhorizontallyorvertically.Durablelightweightdesignwithwheelsforeasy
manoeuvrability.
3. SPECIFICATION
Rollsize:...................................................900mm(rollwidth)
MaxCapacity:.............................................20kg(rollweight)
4. CONTENTS
1..............MK77.01.............................. SideFrame(R/H)x1
2..............MK77.02................................ SideFrame(L/H)x1
3..............MK77.03................................................... Base x1
4..............SS845.S.... HexHeadSetScrewM8X45Zincx9
5..............MK77.05........................................... Cross Bar x1
6..............MK77.06......................................... Wheel Axle x1
7............ FWM12.S.........................FlatWasherM12Zincx4
8..............MK77.08........................................Fixed Wheel x2
9..............MK77.09.............................................Snap Pin x2
10............MK77.10........................................... BrakeBarx2
11................SN8.S............................... SteelNutM8Zincx5
12............MK77.12................................................. Springx1
13............MK77.13................................... RubberSpacerx1
14............SS850.S.... HexHeadSetScrewM8X50Zincx1
15............ FWM8.S...........................FlatWasherM8Zincx1
16............MK77.16........................................... Tape Reel x1
17............MK77.17.............................................. Bushingx1
18............ FWM8.S...........................FlatWasherM8Zincx1
19............MK77.19.......................................... PivotTubex1
20......... HHB870.S.................HexHeadBoltM8x70mmx1
5. ASSEMBLY
 (Refertopartsdiagramoverleaf)
NOTE: Beforeassembling,notethelocationofthe“brakebar”(10)mountingholesinthebase(3)inrelationtothe“crossbar”(5)and 
 spring(12)mountingholesinthesideframes(1,2).
5.1.  Attachsideframes(1,2)tobase(3)withtwoM8x45mmhexbolts(4).DO NOTtightenbolts.
5.2.  Attachfront“crossbar”(5)tolowersetofholesinsideframeswithtwoM8x45mmhexbolts(4).Tightenallboltsinbase.
5.3.  Slide“wheelaxle”(6)throughbaseandplacetwoM12atwashersoneachendofthe“wheelaxle”(6).
5.4.  Slide“xedwheels”(8)oneachendofthewheelaxle.
5.5.  Installthetwo“brakebars”(10)tobasewithM8x45mm(4)asshownonthepartsdiagram.
5.6.  Hookthesprings(12),withtherubberspacer(13),intoholesoneachsideframe.
5.7.  Installthe“tapereel”(16)toinsideofbothsideframesasshownonthepartsdiagram.
6. MAINTENANCE
6.1. Ifinconstantuse,checkthetightnessofallfixingsonaweeklybasis.
MK77Issue2(2)30/09/20
Original Language Version
©JackSealeyLimited
Referto
instructions

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
accordingtolocalregulations.
Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutprior
notice.
Important:NoLiabilityisacceptedforincorrectuseofthisproduct.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
MK77Issue2(2)30/09/20
Original Language Version
©JackSealeyLimited