High-intensity laser beams generate extremely high temperatures and a lot of heat
as cutting burns the substrate quantity. Ceain materials may catch re during cutting,
creating gas and smoke. Do not leave the machine unattended during the engraving
process. After use, be sure to clean up the sundries and inammables in the
machine. Always keep an available re extinguisher nearby to ensure safety. When
using a laser engraver, the material generates fumes, vapors, paicles, and toxic
materials in plastics and other combustible materials. These smog or air pollutants
may harmful to health.
When installing the equipment, make sure that the workplace must be clean and
that there are no ammable or explosive items. A sheet of metal must be placed under
the bottom when engraving or cutting.
When using the laser engraving machine, it is recommended to wear laser safety
goggles. Avoid skin exposure to type 4 beams, especially at close range. Youth aged
12-18 must have parental supeision during use. Do not touch the laser engraving
module when the machine is on.
Cautions
01
02
03
Scan the QG code to nd the installation tutorial video.
- 03 -
