Atins HAS-HSD10 User manual

Operating Instructions
1
HDMI Converter
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
FEATURES
SDI/HD-SDI to HDMI
Equalized Looping SDI/HD-SDI output
Support 1080p@25Hz,[email protected],1080p@30Hz,1080P@60Hz
Compliant HDCP .
Uses 5V power
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.

Operating Instructions
2
TABLE OF CONTENTS
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product service
Warranty
SPECIFICATIONS
Operating Temperature Range
-5 to +35℃(+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Formats
1080i @50/59.94/60Hz,
1080p@25Hz,1080p@29.97Hz,1080p@30Hz,1080P@60Hz
Video Input
3G-SDI/HD-SDI/SDI
Outputs
HDMI
1 Looping SDI/HD-SDI output of the SDI input (75
ohm,unterminated)
HDMI
Standard Type A connector
HDCP
Compliant HDCP
Power consumption
2.5watts(Maximum)
Dimension(L×W×H)
95x95x29mm
Net Weight
245g
Note: Specifications are subject to change without notice.Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit. SDI-HDMI converter
2) DC5V 1A Power Supply.
3) Operating Instructions

Operating Instructions
3
PANEL DESCRIPTIONS
Input Panel Output Panel
1) Indicator of HDMI Output
2) Indicator of power Input
3) SDI/HD-SDI input port
4) SDI/HD-SDI output port
5) HDMI output port
6) Power input
Connecting and Operating
1. Ensure the Converter is disconnected from power.
2. Connect source to the SDI input and sink to HDMI output and SDI output .
3. Connect 5VDC power to the converter.
Attention:Insert/Extract cable gently
Typical Application

Operating Instructions
4
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord orAC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.