Atlas Welded Desk Top Cabinets 400 Series User manual

Specifications subject to change without notice
©1997 Atlas/Sound Printed in U.S.A. 01001 SL10-1099
Ten
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]
FEATURES
• Completely Assembled and All-Welded Construction
• 16-Ga. CRS Cabinet
• 5/8" - 5/8" - 1/2" EIA Standard Panel Mount Spacing
• 5/8" Offset Rails for Panel Mount
• 11-Ga. CRS Tapped Mounting. Rails
• 10-32 Pan-Head Screws for Panel Mount Supplied
• Spring-Loaded Hinge for Easy Removal of Rear Door, Except 400-5 and 400-7
• Keyed Cylinder Lock on Rear Door, Except 400-5 and 400-7
• Internal Louvers on Each Side, Except 400-5 and 400-7
• Wide Choice of Standard Paint Colors (No Additional Cost)
• Rubber Feet Provided on Models 400-5 and 400-7
• Optional Front Surface Door Available on Models 400-12 through 400-31 has
Right or Left-Hand Hinging Capability
GENERAL DESCRIPTION
Atlas/Sound 400 Series cabinets are designed for “desk top” installations accom-
modating 19" (483mm) wide panel-mounted equipment. They are available in
seven popular panel space sizes (see chart on back).
These compact cabinets are constructed of welded 16-ga. CRS throughout. A
locking rear door mounted on a spring-loaded hinge for easy removal is standard
on all except 400-5 and 400-7. (These smaller models have a removable rear
panel secured with “U” clips and bolts.)
Models 400-12 through 400-31 include vents on each side for air circulation. They
are also available with optional front surface door Model Series 400-XXFD (ex:
400-12FD). [Order separately.] Door has right or left-hand hinging capability and
must be customer-installed following simple drilling template (included).
External wiring is easily strung into the cabinet through the wire entry space below
the rear door or panel. Panel mounting rails are recessed 5/8” to provide a flush
appearance.
Series 400 cabinets are shipped completely assembled. Equipment panels and
accessories are mounted with 10-32 x 3/4" (19mm) pan-head screws (supplied).
Rails are formed 11-ga. CRS with tapped mounting holes.
Standard finish is textured black epoxy unless otherwise specified; consult Paint
Chart (SL# 10-1239) for other standard colors available at no additional cost.
A wide variety of convenience and electronic accessories are available for Standard
Series cabinets.
Shown with locking front door
400 Series
WELDED DESK TOP CABINETS
381.1

Specifications subject to change without notice
©1997 Atlas/Sound Printed in U.S.A. 01001 SL10-1099
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]
The desk top cabinet shall be Atlas/Sound Model _____ . It shall be
constructed of 16-gauge CRS. Cabinets with panel space greater
than 12-3/8" shall have vents for improved air circulation. It shall
have a locking rear door on spring loaded hinge with a cylinder lock
or removable panel. The rear of the cabinet shall have suitable entry
space for introducing external wire into the cabinet. Optional front sur-
face door Model _______ shall be used.
The cabinet shall be provided with 10-32 x 3/4" (19mm) pan-head
screws and 11-ga. CRS mounting rails which shall be tapped
10-32. The finish shall be textured black epoxy.
Shipping Optional
A Weight Surface Mount
Model B Rack Panel Pounds Front
No. Width Height Depth Unit Space (Kg.) Door
400-5 22-5/16" 8-1/2" 15-3/8" 3 5-3/8" 30 N.A.
(567mm) (216mm) (391mm) (137mm) (13.61kg)
400-7 22-5/16" 10-1/4" 15-3/8" 4 7-1/8" 33 N.A.
(567mm) (260mm) (391mm) (181mm) (14.97kg)
400-12 22-5/16" 15-1/2" 15-3/8" 7 12-3/8" 36 400-12FD
(567mm) (394mm) (391mm) (314mm) (16.33kg)
400-17 22-5/16" 20-3/4" 15-3/8" 10 17-5/8" 43 400-17FD
(567mm) (527mm) (391mm) (448mm) (19.50kg)
400-21 22-5/16" 24-1/4" 15-3/8" 12 21-1/8" 48 400-21FD
(567mm) (616mm) (391mm) (537mm) (21.77kg)
400-24 22-5/16" 27-3/4" 15-3/8" 14 24-5/8" 54 400-24FD
(567mm) (705mm) (391mm) (626mm) (24.49kg)
400-31 22-5/16" 34-3/4" 15-3/8" 18 31-5/8" 63 400-31FD
(567mm) (883mm) (391mm) (803mm) (28.58kg)
ARCHITECTS AND ENGINEERS’ SPECIFICATIONS