Atlas TSD-GPN1200 User manual

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com– 1 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
TSD-GPN1200
Sound Masking Generator

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com – 2 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Description
The Atlas Sound TSD-GPN1200 sound masking generator is perfectly suited for basic sound
masking systems. The analog topology design eliminates repeating cycles commonly found in other
manufacture’s low cost digital designs.
The TSD-GPN1200 includes a selectable pink or white noise generator and incorporates a variable
balanced output to match input requirements of Atlas Sound equalizers and amplifiers.
In addition to the line level output, a 4W (70V Masking System) output is provided to power up to
six masking loudspeakers tapped at .5W each. A variable hi-cut filter with operating range between
1kHz and 8kHz at a slope of 6dB per octave supports equalization requirements for most basic 4W
amplifier Sound Masking systems. Both outputs may be used simultaneously allowing large zones
to be addressed with external equalization and amplification while a smaller zone is powered by the
internal amplifier with spectrum control from the internal high cut filter.
The TSD-GPN1200 is part of a full line of Atlas Sound Time Saving Devices. These compact
(1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the
easiest and in the most efficient and cost-effective way. All models are made from high quality
components and include removable individual I/O connectors for quick and precise wiring, separate
ground terminals for all I/Os assuring secured connections, and removable level controls that can be
replaced with tamper-proof security covers. The TSDs are highly efficient and meet Energy Star™
standards as one 24V DC power supply (available separately) can power multiple Time Saving
Devices.
Features
• Analog Topology
• SelectablePinkorWhiteNoiseGenerator
• VariableLevelControl
• VariableLowPassEQ
• BalancedLineOutput
• 4WSpeakerOutput
• MultipleMountingCongurations
• CableManagementSystem
• SeparateGroundConnections
• RemovablePhoenixStyleI/OConnectors
• MeetsEnergyStar™ Standards
• CompactChassisDesign
Audio Applications
• SoundMasking
• SecurityMasking
• PinkNoiseGenerator
• WhiteNoiseGenerator
Installation
• CallCenters
• Pharmacies
• GovernmentBuildings
• MedicalFacilities
• OpenOfceEnvironments
• Schools
• IndustrialFacilities

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com– 3 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Front Panel Description
1. Level Control-AdjustthelevelofthemaskingsignalattheHighLevelspeakeroutputand at the
LineOutifthePre/Postswitchisinthe“Post”position.Turnclockwisetoincreasethesignallevel
and counter-clockwise to decrease it. Note:TheLevelControlknobcanberemovedandreplaced
with a supplied security cover to prevent unauthorized adjustment.
2. Power LED - Illuminates Blue when 24VDC is present.
3. Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a
cabinetorwall.Removescrewsandalignthebracketwiththepanelholebeforermlytightening
the screws.
2
1
33
3 3

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com – 4 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Rear Panel Description
TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm
pitch between pins.
1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for
an external 24VDC power supply (sold separately). Because of the low power consumption, a
singleexternalpowersupplymaypowermorethanoneTSD.Refertothecurrentrequirementsin
milliamps to match with the appropriate power supply. Note: It is acceptable to exceed the current
of the TSDs but NOT safe to use a power supply that is below the current requirement of the device.
2. Noise Generator Selector - Select the type of noise signal needed for your application. Most
plenum masking uses pink noise when the ceiling has lay-in tiles. If you are masking under a
raisedoorortheceilingismadefromgypsum,itisrecommendedtouse“white”noise.
3. EQ Adjust - Varies a low cut filter with a range of 1kHz to 8kHz at 6dB per octave. With this control
turnedfullyclockwise,thelterwillhavenoeffectontheoutputsignal.Rotatethecontrol
counter-clockwise to adjust the filter to your preferred masking spectra. This filter is used with a
1/3rdoctaveRTA(RealTimeAnalyzer)fornaltuningofyoursoundmaskingsystem.
4. Pre/Post Selector-DetermineswhethertheLineLevelOutputhastheEQandGainControlinor
outofthecircuit.In“Pre”mode,theGainControlandtheEQControlwillhavenoeffectonthe
LineOut,whilein“Post”mode,boththeEQandGainwilleffecttheLineOutput.
5. Line Output-ABalancedLineLevelOutputofthegeneratorispresenthere.Theconnections
between devices must be mated properly to the Output connector or signal loss and/or noise may
be introduced. Note: Unbalanced line level inputs can be inserted by using the following wire
configuration, tie (short) the (G) and (–) terminals together.
6. High Level Output - Connect up to six (6) 70.7V masking speakers when tapped at 0.5W each for a
load no greater than 4W.
1 2 3 4 5 6
77
7 7

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com– 5 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
7. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing
theincludedcablemanagementretainers.Removeoneoftherearpanelscrews,alignthe
panel hole with a retainer and firmly tighten the screws.
Knob and Security Cover
All front panel level controls feature a removable knob that can be replaced with an included security
cover.Followthesestepstopreventpotentiometerdamageorunwantedchanges.
1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator
to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto
the potentiometer shaft. Do not force or damage may occur to the potentiometer.
2. SecurityCoverInstallation-Removetheknobfromthepanelandinsertthecover.Donotforceor
damage may occur to the potentiometer. Small pliers may be required to remove the knobs.
Mounting
There are three ways to securely mount this TSD:
1. Velcro™ - Each unit includes industrial grade Velcro™ with adhesive backing to adhere to any
flat surface.
2. Brackets - Each unit includes two mounting brackets to secure to a cabinet or wall.
3. RackMountPanel-TheoptionalTSD-RMKrackmountpanelsupportsuptofourTSDsina
1RUspace.

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com – 6 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications
Description Sound Masking Generator/Amplifier
Chassis Color Black
Chassis Material Aluminum
Inputs
Noise Generator Internal Pink or White Selectable
Outputs
Type Qty1,BalancedLine
Connection Removable3PositionCaptiveScrew3.5mmSpacing
Impedance 300ΩBalanced, 150ΩUnbalanced
LineOutputLevel MaximumOutput500mV
Type Qty1,SpeakerOut4W&70.7VMaskingSystemSpeakers
Connection Removable3PositionCaptiveScrew3.5mmSpacing
LineOutputLevel MaximumOutput4W
Controls
LevelControl Qty1,RemovableKnobwithSecurityCover
Noise Generator Select Pink or White
LineOutSelect PreorPostEQ
EQAdjust RecessedScrewDriver
Indicators
Power Blue
Block Diagram
PINK/WHITE SWITCH
GAIN
OT
COM
LINE OUT
+
–
G
+
PRE/POST EQ SWITCH
WHITE
PINK
AMP
70V MASKING SYSTEM
4W OUTPUT
EQ
DC 24V INPUT
POWER

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com– 7 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Electrical
Topology RandomAnalog
FrequencyResponse 20Hz-20kHzLineOutPreEQOnly
EQFilter HighCut,Variable,1kHz-8kHz/6dB
Mounting
Velcro™ Industrial Grade, Included
Brackets Qty2,Included
TSD-RMK Optional1RURackMountPanel(Supports4TSDUnits)
CableRetainer Qty2,Included
Power Requirements
Voltage 24VDC
Average Power Consumption 100mA
Average Power Consumption 2.4W
Dimensions H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm)
Weight 6oz, .165kg

Owner’s Manual
TSD-GPN1200
Sound Masking Generator
AtlasSound.com – 8 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Limited Warranty
All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or
commercial purchaser to be free from defects in material and workmanship and to be in compliance
with our published specifications, if any. This warranty shall extend from the date of purchase for
aperiodofthreeyearsonallAtlasSoundproducts,includingSOUNDOLIERbrand,andATLAS
SOUND brand products except as follows: one year on electronics and control systems; one year on
replacement parts; and one year on Musician Series stands and related accessories. Additionally,
fuses and lamps carry no warranty. Atlas Sound will solely at its discretion, replace at no charge or
repair free of charge defective parts or products when the product has been applied and used in
accordance with our published operation and installation instructions. We will not be responsible
for defects caused by improper storage, misuse (including failure to provide reasonable and
necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge,
or malfunctions when products have been modified or operated in excess of rated power, altered,
serviced or installed in other than a workman like manner. The original sales invoice should be
retained as evidence of purchase under the terms of this warranty. All warranty returns must comply
with our returns policy set forth below. When products returned to Atlas Sound do not qualify for
repair or replacement under our warranty, repairs may be performed at prevailing costs for material
and labor unless there is included with the returned product(s) a written request for an estimate
of repair costs before any nonwarranty work is performed. In the event of replacement or upon
completion of repairs, return shipment will be made with the transportation charges collect.
EXCEPTTOTHEEXTENTTHATAPPLICABLELAWPREVENTSTHELIMITATIONOFCONSEQUENTIAL
DAMAGESFORPERSONALINJURY,ATLASSOUNDSHALLNOTBELIABLEINTORTORCONTRACT
FORANYDIRECT,CONSEQUENTIALORINCIDENTALLOSSORDAMAGEARISINGOUTOFTHE
INSTALLATION,USEORINABILITYTOUSETHEPRODUCTS.THEABOVEWARRANTYISINLIEUOF
ALLOTHERWARRANTIESINCLUDINGBUTNOTLIMITEDTOWARRANTIESOFMERCHANTABILITY
ANDFITNESSFORAPARTICULARPURPOSE.
Atlas Sound does not assume, or does it authorize any other person to assume or extend on its
behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
Service
Should your Atlas TSD require service, please contact the Atlas Sound
warrantydepartmentat1-877-689-8055,ext.1274toobtainanRAnumber.
Atlas Sound Tech Support can be reached at 1-800-876-3333.
Visit our website at www.AtlasSound.com to see other Atlas products
©2010AtlasSoundL.P.Allrightsreserved.AtlasSoundisatrademarkofAtlasSoundL.P.
Allothertrademarksarethepropertyoftheirrespectiveowners.ATS003940RevA9/10
Table of contents