Atlona AT-UHD-SW-51 User manual

atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
4K/UHD 5 Input HDMI Switcher
Please check http://www.atlona.
com/AT-UHD-SW-51
for the most recent firmware
update or manual
User Manual
AT-UHD-SW-51

2
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Table of Contents
1. Introduction ................................................................................................... 3
2. Package Contents ................................................................................................... 3
3. Features ................................................................................................... 3
4. Panel Descriptions
a. Front ................................................................................................... 4
b. Back ................................................................................................... 4
5. Infrared Remote Control ................................................................................................... 4
6. ARC ................................................................................................... 5
7. Captive Screw ................................................................................................... 5
8. WebGUI ................................................................................................... 6-11
9. RS-232 ................................................................................................... 12-14
10. Installation Diagram ................................................................................................... 15
11. Specifications ................................................................................................... 16
12. Safety Information ................................................................................................... 17
13. Warranty ................................................................................................... 18-19
14. Registration ................................................................................................... 19

3
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
• 1 x UHD-SW-51
• 1 x 5V DC power supply
• 2 x Female captive screw connector (3 pin: RS-232, 2 pin: power)
• 1 x Short rack ear
• 1 x Long rack ear
• 2 x Mounting plates
• 1 x Remote control
• 1 x User Manual
• Five HDMI inputs
• Smart switching with auto-detect (5V detect) for inputs (activated through RS-232 or TCP/IP)
• HDMI Audio Return Channel compatible
• HDCP management
• Supports 4K pass through @ 60Hz 4:2:0 chroma sub-sampling
• Supports Dolby®TrueHD and DTS-HD Master Audio™pass-through ability when using an HDMI
cable
• Digital audio de-embedding through the S/PDIF output for up to DTS 5.1™ and Dolby® Digital
• Two channel PCM and LPCM de-embedding through analog output
• EDID management
• Easy to use webGUI through TCP/IP connection
• Half-rack size with rack mount ears
Introduction
Features
Package Content
The 4K/UHD 5 input HDMI switcher is an affordable 5-input, 1-output switcher with 4K pass-
through, IR, RS-232, and TCP/IP control, EDID and HDCP management, and ARC. The UHD-SW-51
provides an easy to install solution for home and small offices.

4
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Back Panel
1. HDMI IN - Connect sources here
2. HDMI OUT - Connect to an HDMI display, extender, or switcher
3. Mini USB port: Firmware update port, connect a Mini USB to USB A cable to a computer
4. LAN port - Connect network switch or router to this port for TCP/IP or webGUI control
5. DC 5V: Connect included locking, 5V DC power supply here
6. RS-232 port - Connect control system to RS-232 port
7. Audio output - Connect to an amplifier, audio receiver, or other audio device
1
1
2
2
1
2
3
5
3
3 4
6
7
Panel Descriptions
Front Panel
1. HDMI LEDs - Illuminates to indicate the selected source
2. Power Button - Turns switcher on or places it in standby mode
3. Input Button - Switches between HDMI inputs
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AT-UHD-SW-51
R
L
FW LAN
RS-232
RX TX
DC 5V
-+
HDMI IN HDMI OUT
AUDIO
S/PDIF OUT
1 2 3 4 5
POWER INPUT
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AT-UHD-SW-51
R
L
FW LAN
RS-232
RX TX
DC 5V
-+
HDMI IN HDMI OUT
AUDIO
S/PDIF OUT
1 2 3 4 5
POWER INPUT
Remote Control
1. Power On/Off: Turn switcher power on and off
2. Video On/Off: Turns HDMI video off
3. Input selection: Selects source
Note: On/off video 2, audio, and setup buttons are not functional for the
UHD-SW-51 switcher
SW-R1
Setup
Video 1
Video
Video 2
All On
Power
Vol +
Vol
-
Menu
Return
Enter
Mute
1
3
2
4
5
Input Audio
On Off
On Off
On Off

5
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Captive Screw
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AT-UHD-SW-51
R
L
FW LAN
RS-232
RX TX
DC 5V
-+
HDMI IN HDMI OUT
AUDIO
S/PDIF OUT
1 2 3 4 5
POWER INPUT
ARC enables a source connected to a display to route audio back to the switcher and send the de-
embedded audio out the S/PDIF output.
1. Check to be sure the display supports ARC
2. Enable ARC on the HDMI output of the switcher through RS-232 (command ARC on), TCP/IP, or
webGUI
3. Connect the HDMI output port of the switcher to the ARC labeled input port on the display
Note: The switcher must be connected to the display’s HDMI ARC input
Note: Works well with audio from ARC enabled “Smart” televisions
4. Connect the source to a non ARC HDMI input port on the display
5. Connect the S/PDIF port to an AVR or Zone Amp
Audio Return Channel (ARC)
Steps
HDMI
Bidirectional HDMI w/ARC signal
Audio loop-out
S/PDIF audio loop-out
Bidirectional HDMI ARC signal
HDMI
Game Console
Connecting
Captive screw connectors are an added feature on the UHD-SW. The Captive screw connectors allow
you to cut cables down to a suitable length, reducing cable clutter while providing a more reliable
connection.
The captive screw connectors have
a contact bar that is adjusted to
compress the wire against the top
contact plate. Use the screws at the
top of the connector to compress the
wire against the contact plate.
When connecting the cables to the female captive screw connector it is important that the wires be
terminated correctly. The female captive screw connector has a contact plate at the top and must
have the wires touching it for signal to pass. When wired correctly (see picture A) the signal will pass,
incorrectly (see picture B) no signal will pass.
The power cable (picture 1) will have exposed wires. Each wire is encased in a different colored cover.
Female captive screw connectors are included: Power (see picture 2) and RS-232 (see picture 3).
2
Power RS-232
Clockwise Counter
Clockwise
Turn the screws clockwise to
raise the contact bar to the
upper contact plate and hold
the wires in place.
Turn the screws counter
clockwise to lower the
contact bar to release the
wires.
AB
3RS-232 pin out will be
determined by the RS-232
cable and will connect as Rx
(receiver), Tx (transmitter),
and (ground). (See picture 4)
Pin out color will differ
per RS-232 cable.
4
Black: - White: +
- +
1

6
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
TCP/IP
For convenience, the UHD-SW comes with DHCP on. This enables the switcher to be connected
to a network without knowing available IP addresses. If your network does not allow dynamic IP
addresses or if you are using the UHD-SW with a TCP/IP control system, this feature may be turned
off and the IP address set using RS-232 commands or the webGUI.
TCP/IP WebGUI
Atlona has created an easy to use WebGUI for initial setup and later changes to the configuration
of the UHD-SW.
To begin, plug a LAN cable into the LAN port of the UHD-SW and your network, then type the IP
address of the UHD-SW into a web browser of a PC connected to the same network (as seen below).
To find the switcher IP: use RS-232 command “IPCFG”.
Important: If any stability issues are experienced, disable any anti-virus or firewall that may interfere with
net work communication to the switcher. Once set up is done and the switcher GUI is no
longer used, the firewall and anti-virus can be re-enabled.
A login screen will appear (this is the same log in for admin and general users). For the first log in (and future
admin changes) the username is “root” and password is “Atlona”.
Note: Only the admin password can be changed (see page 9). The username will always remain “root”.
Note: IP addresses may also be found using common free IP scanner software such as “Advanced IP Scanner”

7
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
The home screen tab will
display the general system
information.
The network set up page will allow the IP information to be changed. When a change is made the
screen will grey and the ability to save or cancel will display at the bottom.
Note: When DHCP is on, the IP address cannot be configured. Turn DHCP off to enable IP configuration.
Note: For a stable connection when using a control system, it is best to set up a static IP. As you select an IP address,
make certain no other devices on your network are using that IP address.
Login Mode has been added to provide a secure telnet login. Once Login Mode has been turned on
a username and password will be required on all IP connections to the switcher.
Note: Login mode should be in off position when the UHD-SW is used with control systems that do not
support passwords. If your control system supports password protection, you can turn login mode
on. The GUI always requires a password.
Note: The username and password used in IP Login Mode will be the same login information as the
WebGUI.

8
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
System Settings
Auto Switch - Turn auto switching on/off. Default is off.
Video Settings
Source - Select one of the five inputs to be routed to the output.
Audio Settings
Output 1 - Turns HDMI audio output on or off.
ARC Settings
Output 1 - Turns ARC on or off.

9
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
The config page will allow the admin password to be changed, users to be added, and the RS-232
port to be configured.
Note: User information will display for the admin only. Up to 3 users other than admin can be added.
Note: Only the admin password can be changed. The username will always remain “root”. If the admin password is
lost the system must be returned to factory settings and setup repeated.

10
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
The EDID page enables the input preferred timing to be selected and HDCP compliance reporting
to be set.
Note: UHD-SW-51 protects HDCP encoded content and will not pass HDCP content to a non-HDCP compliant device.
Note: Some devices flag all content as protected when connected to an HDCP compliant display. This prevents what
should be non-protected content from reaching devices (e.g. teleconference system) through the UHD-SW-51.
Note: When HDCP reports as non-compliant, only user created content is transmitted. Protected content from all
sources (e.g. Blu-ray, AppleTV, etc) is blocked.
This function is controllable through RS-232 and TCP/IP.
EDID Saved
Save the current output’s EDID to memory. There are eight total EDID memories to save to.
Note: Internal EDIDs include audio EDIDs as well. 2Ch is two channel audio, MCh is multi-channel audio (including up
to Dolby TrueHD or DTS-HD Master Audio), DD is Dolby Digital, and DVI does not include audio.
Internal EDIDs -
STD Sink (pass through) Int_1 1080P 2Ch Int_2 1080P MCh
Int_3 1080P DD Int_4 1080P 3D 2Ch Int_5 1080P 3D MCh
Int_6 1080P 3D DD Int_7 720P 2CH Int_8 720P DD
Int_9 1280x800 2Ch Int_10 1366x768 2Ch Int_11 1080P DVI
Int_12 1280x800 DVI Int_13 3840x2160 2Ch Int_14 3840x2160 MCh

11
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Download the latest firmware from http://www.atlona.com then update the unit using this
function.
Click the browse button and select the firmware to be loaded. Once selected, press the upload
button. The progress bar will display the progress of the firmware update.

12
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS-232
To set up the RS-232 hyperterminal the first thing needed is to find the RS-232 communications port under
the computer’s device manager. Once there right click the port and select properties. Under the properties
menu select the port settings tab and update the menu to the switcher default:
Bits Per Second: 115200, Data Bits: 8, Parity: None, Stop Bits: 1 and Flow Control: None.
Hyperterminal
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them,
some will be unassigned.
No. Pin Function
1 ---- Not used
2 Tx Transmit
3 Rx Receive
4 ---- Not used
5 Gnd Ground
6 ---- Not used
7 ---- Not used
8 ---- Not used
9 ---- Not used
54 3 2
9 8 7 6
1
B
A
C

13
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is “Command FAILED”
Note: Preferred timings include audio EDIDs as well. 2Ch is two channel audio, MCh is multi-channel audio
(including up to Dolby TrueHD or DTS-HD Master Audio), DD is Dolby Digital, and DVI does not
include audio.
Commands
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description
PWON PWON Turns switcher on
PWOFF PWOFF Turns switcher off
PWSTA PWSTA Displays power status
VersionX
Ex. Version OSD
VersionX
Ex. Version x.x.xx
Displays the software versions: ex. VersionMCU
firmware [MCU]
OSD menu [OSD]
DSP [DSP]
FPGA [FPGA]
Type AT-UHD-SW-51 Displays the model information
Mreset Mreset Reset device to manufacture default
Lock Lock Locks the front panel buttons
Unlock Unlock Unlocks the front panel buttons
x2AVx1 x2AVx1 Switch inputs Ex. Switch to input 4= x4AVx1
Status x2AVx1 Displays what input is connected to the output
x1$ X x1$ on Turns on/off output channel (X= on, off, sta)
AutoSW X AutoSW on Turns auto switching on/off (X= on, off, sta)
IRON IRON Turns on the IR receiver window
IROFF IROFF Turns off the IR receiver window
EDIDCopy1 memY
Ex. EDIDCopy1 mem2
EDIDCopy1 memY
Ex. EDIDCopy1 mem2
Save the EDID of output 1 to memory (Y= 1-8)
EDIDMSetX default EDIDMSetX default Set the EDID of the input to the default EDID
EDIDMSetX saveY EDIDMSetX saveY Set the EDID of an input to the previously saved EDID memory
Ex. EDIDMset3 save1 - sets input 3 to EDID memory 1
EDIDMSetX intY EDIDMSetX intY Sets the EDID of an input to one of the internal EDIDs
Ex. EDIDMSet2 int3 - Sets input 3 to internal EDID 3
HDCPSet1 X
Ex. HDCPSet1 on
HDCPSet1 X
Ex. HDCPSet1 on
Set HDCP reporting mode of the HDMI input (X= 1-5)(Y= on, off, sta)
Ex. Input 3 to report HDCP non-compliant = HDCPSet3 off
AudioOut1 X AudioOut1 on Turns the HDMI audio output on/off (X= on, off, sta)
ARC X ARC on Turns on/off ARC (X= on, off, sta)
[Y] preferred timing -
STD Sink (pass-through) 11080P 2Ch 21080P MCh
31080P DD 41080P 3D 2Ch 51080P 3D MCh
61080P 3D DD 7720P 2CH 8720P DD
91280x800 2Ch 10 1366x768 2Ch 11 1080P DVI
12 1280x800 DVI 13 3840x2160 2Ch 14 3840x2160 MCh

14
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command Feedback Description
IPCFG IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port : x
Displays IP address configuration
IPQuit IPQuit Logs out of TCP/IP Connection
IPAddUser X Y
Ex. IPAddUser Atlona 1234
TCP/IP user was added Adds a user for TCP/IP control
X= user and Y= Password
IPAddUser username password
username password
username password
Displays a list of users and passwords
IPDelUser X TCP/IP user was deleted Delete a user from TCP/IP X= username
IPDHCP X IPDHCP X Turns DHCP on or off X= on, off, sta
IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
IPPort X IPPort X Set the TCP/IP Port
IPLogin X
Ex. IPLogin off
IPLogin X
Ex. IPLogin off
Enables IP Login
X= on, off, sta
Broadcast X
Ex. Broadcast on
Broadcast X
Ex. Broadcast on
Sets broadcast mode on or off
X= on, off, sta
IPTimeout XX
Ex. IPTimeout 300
IPTimeout XX
Ex. IPTimeout300
Determines amount of seconds of inactivity before TCP/IP
disconnects
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is “Command FAILED”
IP Commands

15
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AT-UHD-SW-51
R
L
FW LAN
RS-232
RX TX
DC 5V
-+
HDMI IN HDMI OUT
AUDIO
S/PDIF OUT
1 2 3 4 5
POWER INPUT
Connections and Installation
Video
Audio
Control
A/V Receiver 5.1Ch
Control System
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
GND
SIG
+12V
GND
SIG
+12V
GND
SIG
+12V
GND
SIG
+12V
1 2 3 4
RELAYS
WIFI 2
ZIGBEE 12V DC
IR OUT
IDFACTORY
RESTORE
SERIAL 1
SERIAL 2
HDMI COMPONENT
VIDEO OUT ETHERNET CONTACTS
AUDIO OUT
AUDIO IN
WIFI 1 eSATADIGITAL
COAX OUT
1
2
3
4
5
6
L
R
Game Console

16
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Specifications
Resolutions
Video 4096x2160@24/25/30/50/60Hz*, 3840x2160@24/25/30/50/60Hz*
(UHD), 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz,
1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050,
1600x1200, 1600x900, 1440x900, 1400x1050, 1366x768, 1360x768,
1280x1024, 1280x800, 1280x768, 1152x864, 1024x768, 800x600,
640x480
Colorspace YUV, RGB
Chroma Sub-sampling 4:4:4, 4:2:2, 4:2:0
Color depth 8-bit, 10-bit, 12-bit
Audio
Formats - HDMI IN/OUT PCM 2 Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1,
Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
Formats - S/PDIF PCM 2 Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1
Format - L/R audio maximum analog output: balanced +5dBu @ 0dBfs, 2Ch PCM only
Sample rate 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Distance (per port)
HDMI @ 1080p 10 meters 30 feet
HDMI @ 4K 5 meters 15 feet
Signal
Bandwidth 10.2 Gbps
CEC Pass through
HDCP Switchable - Complaint / Non-compliant
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption 5.94W
Idle Consumption 1.57W
Supply Input: AC100~240V 50/60Hz
Output: DC 5V/3.6A
Dimension
H x W x D 44 x 222.25 x 261 (mm) 1.73 x 8.75 x 10.28 (inch)
Rack size 1/2 rack, 1RU
Weight
Device 3.10 kg 1.40 lbs
Certification
Power Supply CE, FCC, cULus, RCM
Product CE, FCC
*4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

17
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
To reduce the risk of electric shock, do not
expose this product to rain or moisture
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Safety Information
Safeguards
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not
expressly approved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies
could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or
against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish
tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or
aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also
cause damage to your product. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona
reseller or contact Atlona directly.

18
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Atlona, Inc. (“Atlona”) Limited Product Warranty Policy
Coverage
Atlona warrants its products will substantially perform to their published specifications and will be free from defects in
materials and workmanship under normal use, conditions and service.
Under its Limited Product Warranty, Atlona, at its sole discretion, will either:
A) repair or facilitate the repair of defective products within a reasonable period of time, restore products to their
proper operating condition and return defective products free of any charge for necessary parts, labor and shipping
OR
B) replace and return, free of charge, any defective products with direct replacement or with similar products deemed
by Atlona to perform substantially the same function as the original products
OR
C) refund the pro-rated value based on the remaining term of the warranty period, not to exceed MSRP, in cases
where products are beyond repair and/or no direct or substantially similar replacement products exist.
Repair, replacement or refund of Atlona’s products is the purchaser’s exclusive remedy and Atlona’s liability does not
extend to any other damages, incidental, consequential or otherwise.
This Limited Product Warranty extends to the original end-user purchaser of Atlona’s products and is non-transferrable to
any subsequent purchaser(s) or owner(s) of these products.
Coverage Periods
Atlona’s Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on
the end-purchaser‘s sales or delivery receipt is the proof purchase date.
Limited Product Warranty Terms – New Products
• 10 years from proof of purchase date for hardware/electronics products purchased on or after June 1, 2013
• 3 years from proof of purchase date for hardware/electronics products purchased before June 1, 2013
• Lifetime Limited Product Warranty for all cable products
Limited Product Warranty Terms – Refurbished (B-Stock) Products
• 3 years from proof of purchase date for all Refurbished (B-Stock) hardware and electronic products purchased on or
after June 1, 2013
Remedy
Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they purchased
their products. Atlona can also be contacted directly. Visit www.atlona.com for Atlona’s contact information and hours
of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller or end-purchaser is
provided before Atlona extends its warranty services. Additionally, a return merchandise authorization (RMA) and/or case
number, is required to be obtained from Atlona in advance of returns.
Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not
bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject
any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976 (US
toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at www.atlona.com.
Exclusions
This Limited Product Warranty excludes:
• Damage, deterioration or malfunction caused by any alteration, modification, improper use, neglect, improper
packing or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature.
• Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation,
any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make
such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this
product.
• Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction with
the product(s).
• Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized
channels of distribution.

19
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information is
completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Disclaimers
This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will
not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any
other current product, technology or any future products or technologies in which Atlona’s products may be used in
conjunction with. Atlona, at its sole discretion, reserves the right not to extend its warranty offering in instances arising
outside its normal course of business including, but not limited to, damage inflicted to its products from acts of god.
Limitation on Liability
The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for
its products. To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or
consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some
countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect
damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.
Exclusive Remedy
To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are exclusive
and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. To the maximum
extent permitted by law, Atlona specifically disclaims all implied warranties, including, without limitation, warranties
of merchantability and fitness for a particular purpose. If Atlona cannot lawfully disclaim or exclude implied warranties
under applicable law, then all implied warranties covering its products including warranties of merchantability and fitness
for a particular purpose, shall provide to its products under applicable law. If any product to which this limited warranty
applies is a “Consumer Product” under the Magnuson-Moss Warranty Act (15 U.S.C.A. §2301, ET SEQ.) or other
applicable law, the foregoing disclaimer of implied warranties shall not apply, and all implied warranties on its products,
including warranties of merchantability and fitness for the particular purpose, shall apply as provided under applicable
law.
Other Conditions
Atlona’s Limited Product Warranty offering gives legal rights, and other rights may apply and vary from country to
country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been
removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive list of
Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com.