manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Atmel
  6. •
  7. Network Hardware
  8. •
  9. Atmel AT91SAM7XC256 User manual

Atmel AT91SAM7XC256 User manual

ÒAT91SAM7X and AT91SAM7XC ARM Microcontrollers
For Real-time Ethernet Networking
SMART ARM MICROCONTROLLERS
RC
OSC
1.8V
LDO
Main
OSC
PMC
AIC
PIT
WDT
PLL
RTT
POR
BOD
JTAG
ICE
SRAM
Flash
ROM
FFPI
SAM-BA™
DMA
10/100
EMAC
ARM7TDMI®
APB
Memory Controller
AMBA™ Bridge Peripheral DMA Controller
AES
TDES* CAN
8 x
ADC
PWM
62 x
PIO
3 x
Timer
2 x
SPI TWI USB
Device
SSC
(I2S)
2 x
USART
Debug
UART
*AES/TDES available on AT91SAM7XC only.
Atmel’s AT91SAM7X and AT91SAM7XC 32-bit microcontrollers are designed for extensively networked,
real-time embedded control applications that require USB, Ethernet and CAN. Based on the industry-
standard ARM7TDMI®core, the AT91SAM7X(C) boosts performance via deterministic processing, ensuring
high-speed communication with low CPU overhead. For applications requiring maximum security for
streaming content, the AT91SAM7XC integrates crypto co-processors.
■ 55 MHz, 50 MIPS
■ 25 ns internal Flash with sector lock capabilities and hardware chip lock
■ Single-cycle access SRAM at maximum operating frequency
■ USB (Full speed 2.0), configurable Ethernet MAC, CAN Controller
■ SPIs, USARTs, SSC (I2S), TWI, 10-bit A/D converter
■ 11-channel DMA engine between peripherals and on-chip memory (PDC)
■ System Controller includes Advanced Interrupt Controller, Brownout Detector, Power-On-Reset,
Watchdog Timer, Real Time Timer, RC Oscillator
■ AT91SAM7XC integrates AES and TDES with encryption rates of up to 80 Mbps
■ Green 100-lead LQFP (16x16x1.6 mm) and 100-ball TFBGA (9x9x1.1 mm) packaging options
■ Atmel and industry leading third-party development tools and low-priced evaluation boards
ÒAT91SAM7X and AT91SAM7XC ARM Microcontrollers
For Real-time Ethernet Networking
Headquarters
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel.: (1)408 441-0311
Fax: (1)408 487-2600
International
Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel.: (852) 2721-9778
Fax: (852) 2722-1369
Atmel Europe
Le Krebs
8, rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-Yvelines
Cedex France
Tel.: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel.: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Contact
Zone Industrielle
13106 Rousset Cedex
France
Tel.: (33) 442-53-6000
Fax: (33) 442-53-6001
Literature Requests
www.atmel.com/literature
Web Site
www.atmel.com
© 2007 Atmel Corporation.
All rights reserved.
Atmel®, logo and combinations thereof,
Everywhere You Are®and others are
registered trademarks or trademarks
of Atmel Corporation or its subsidiaries.
ARM®, the ARMPowered®logo,
ARM7TDMI®, Thumb®and others are
the registered trademarks, AMBA™
and others are trademarks of ARM Ltd.
Other terms and product names may
be the trademarks of others.
Rev.: 6262B-ATARM-04/07/5M
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALES LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY
DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE
USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel
products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Product Flash SRAM Package Ordering Code Green Compliance
AT91SAM7X512 512 KB 128 KB LQFP100 AT91SAM7X512-AU Yes
BGA100 AT91SAM7X512-CU Yes
AT91SAM7XC512 512 KB 128 KB LQFP100 AT91SAM7XC512-AU(1) Yes
BGA100 AT91SAM7XC512-CU(1) Yes
AT91SAM7X256 256 KB 64 KB LQFP100 AT91SAM7X256-AU Yes
BGA100 AT91SAM7X256-CU Yes
AT91SAM7XC256 256 KB 64 KB LQFP100 AT91SAM7XC256-AU(1) Yes
BGA100 AT91SAM7XC256-CU(1) Yes
AT91SAM7X128 128 KB 32 KB LQFP100 AT91SAM7X128-AU Yes
BGA100 AT91SAM7X128-CU Yes
AT91SAM7XC128 128 KB 32 KB LQFP100 AT91SAM7XC128-AU(1) Yes
BGA100 AT91SAM7XC128-CU(1) Yes
(1) Contains crypto hardware. Export restrictions may apply.
The AT91SAM7X-EK and AT91SAM7XC-EK
development kits enable evaluation capabilities
and code development for applications
running on the AT91SAM7X and
AT91SAM7XC microcontrollers
respectively. The development
kit package contains following
items:
■ an AT91SAM7X
or AT91SAM7XC
Evaluation Board
■ one A/B-type USB cable
■ one crossed serial RS232 cable
■ one RJ45 crossed Ethernet cable
■ universal input AC/DC power supply with US and EU plug
adapter
■ a DVD-ROM containing summary and full datasheets with electrical and
mechanical characteristics, application notes and getting started documents for all
AT91 microcontrollers. An AT91 software package with C and Assembly listings is also provided. All this
allows a user to begin evaluating an AT91 ARM®Thumb®32-bit microcontroller quickly and easily.
■ more information on tools and software is available on:
http://www.atmel.com/dyn/products/tools.asp?family_id=605
Open Source Software Offering Commercial Software Offering
FreeRTOS™ µC/OS-II EmbOS RTL-ARM
NUT/OS Tiny+ Nucleus MQX™ RTOS
eCOS ThreadX®AMX™ RTOS RTXC™
eCosPro™ smx®Salvo™
IAR PowerPac™

This manual suits for next models

7

Other Atmel Network Hardware manuals

Atmel ATAVRAUTOEK1 User manual

Atmel

Atmel ATAVRAUTOEK1 User manual

Atmel ATAVRAUTO100 User manual

Atmel

Atmel ATAVRAUTO100 User manual

Atmel AVR2070 Installation and operating instructions

Atmel

Atmel AVR2070 Installation and operating instructions

Popular Network Hardware manuals by other brands

HIK VISION iDS-96000NXI-I16/24 quick start guide

HIK VISION

HIK VISION iDS-96000NXI-I16/24 quick start guide

Checkpoint 16000 manual

Checkpoint

Checkpoint 16000 manual

Black Box JPM083A manual

Black Box

Black Box JPM083A manual

HIK VISION DS-7600NI-12 Series user manual

HIK VISION

HIK VISION DS-7600NI-12 Series user manual

Qlogic QLE7xxx Series quick start guide

Qlogic

Qlogic QLE7xxx Series quick start guide

Checkpoint 730 Getting started guide

Checkpoint

Checkpoint 730 Getting started guide

Q-See QC824 Specifications

Q-See

Q-See QC824 Specifications

HIK VISION DS-3WF02C-5N/O quick start guide

HIK VISION

HIK VISION DS-3WF02C-5N/O quick start guide

Q-See QC8116 Specifications

Q-See

Q-See QC8116 Specifications

Black Box MX550A Specifications

Black Box

Black Box MX550A Specifications

Viavi NSC-100 Quick Card User Guide

Viavi

Viavi NSC-100 Quick Card User Guide

Lanner ECA-4027 user manual

Lanner

Lanner ECA-4027 user manual

ADF Web HD67609-A1 user manual

ADF Web

ADF Web HD67609-A1 user manual

Tieline Genie STL user manual

Tieline

Tieline Genie STL user manual

F5 8900 Platform guide

F5

F5 8900 Platform guide

Cisco NCS 1002 troubleshooting guide

Cisco

Cisco NCS 1002 troubleshooting guide

Hi-flying Elfin-EG4X user manual

Hi-flying

Hi-flying Elfin-EG4X user manual

SONIX MP5S Plus Writer quick guide

SONIX

SONIX MP5S Plus Writer quick guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.