Atoms Labs AWF50 User manual
Wireless APP Camera
Installation and Operating Instructions
Model: WAPP-GO8
Version 1.1
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
disconnect to the WAPP camera.
*
• By adjusting to “Better Streaming” in the system setting section may improve
the WAPP APP performance.
* 1.5GHz dual
core processor or equivalent is suggested.
•
•
•
•
•
CLASS10
1
CONTENTS
INTRODUCTION .............................................................................................. 2
WIRELESS DEVICES OPERATING RANGE ............................................................2
IMPORTANT SAFETY PRECAUTIONS.....................................................................2
KIT CONTENT .................................................................................................
................................................................ 5
NIGHT VISION .........................................................................................................6
CAMERA INSTALLATION .........................................................................................6
CAMERA OVERVIEW ...................................................................................... 7
DOWNLOAD AND SETUP THE APP ............................................................... 8
....................................................... 11
VIEWING YOUR SNAPSHOTS ...................................................................... 13
PLAYBACK YOUR VIDEOS........................................................................... 13
MAIN PAGE OVERVIEW................................................................................ 17
ADVANCED SETTING ................................................................................... 22
ADMIN PASSWORD ...............................................................................................23
EMAIL ALERT.........................................................................................................23
TIME ZONE ............................................................................................................24
DAYLIGHT SAVING ................................................................................................24
DEVICE SECURITY CODE.....................................................................................24
VIDEO SETTINGS..................................................................................................24
WI-FI SETTING ......................................................................................................25
SENSITIVITY SETTING..........................................................................................26
EMAIL SETTING.....................................................................................................26
SD CARD SETTING ...............................................................................................27
OVERWRITE SD CARD..........................................................................................27
PROFILE SETTING ................................................................................................27
DEVICE INFORMATION .........................................................................................27
TROUBLE SHOOTING .................................................................................. 28
.......................................................................... 31
STORAGE MEDIA MANAGEMENT ............................................................... 32
APPENDIX: COMPATIBLE LIST.................................................................... 33
2
INTRODUCTION
I
so may
is a storm or
the reach of
infants.
in operation.
WIRELESS DEVICES OPERATING RANGE
reception
3
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide
reasonable protection against harmful interference in residential installations. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does interference to radio or
television equipment reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Move the equipment away from the receiver.
Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for additional suggestions.
approved by the party responsible for compliance could void your authority to operate
such equipment.
DISPOSAL
If the camera system no longer functions or can no longer be repaired, it must be
disposed of according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and
accumulators. Disposing of spent batteries/accumulators with common household waste is
prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols
on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators
in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be
charged to the designated collection points in your community, outlets or wherever batteries or
and contribute to the protection of our environment!
Products with CE Marking comply
with EMC Directive (2004/108/
EC); Low Voltage Directive (73/23/
EEC); R&TTE(1999/5/EC); ROHS
Directive (2011/65/EU) issued by the Commission
of the European Community. Compliance with
these directives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
FCC Compliance Statement: This device
complies with Part 15 of the FCC rules.
Operation is subjected to the following two
(1)
this device may not cause harmful
interference,and (2) this device must accept any
interference
received, including interference that
may cause undesired operation.
conditions:
4
Camera Antenna
Screw Pack
x 1
x 1
x 1
x 1
Tools Required:
•
•
•
•
x 1
x 1
KIT CONTENT
5
6
NIGHT VISION
CAMERA INSTALLATION
7
CAMERA OVERVIEW
Light Sensor
Motion Sensor
SMA Connector
RJ-45 Connector
Antenna
8
DOWNLOAD AND SETUP THE APP
APP Name: OMGuard HD
HD”.
APP Setup
Ɇ
•
•
•
9
APP Setup
permission to user access.
Note:
10
Note:
networks.
11
Tap to return to the main page.
12
Note:
13
VIEWING YOUR SNAPSHOTS
Photo Gallery > snapshot
PLAYBACK YOUR VIDEOS
Tap the CAMERA SETTING icon on the main page.
14
15
/
•DOWNLOAD
Note:
16
continue.
•DELETE
Note:
Note:
Then tap the trash can icon
17
MAIN PAGE OVERVIEW
ADD CAMERA
The system supports up to 3 concurrent user connections.
18
upper corner.
Table of contents
