ATTO Technology ATTO ExpressPCI FC 2600 Manual

Fibre Channel
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
attotech.com
1.0625-Gigabit Fibre Channel Host Adapter
With a Fixed Copper HSSDC Interface
ATTO ExpressPCI FC 2600
• 1.0625-Gigabit Fibre Channel
host adapter
•200 MB/sec. throughput in
full-duplex mode
•Fixed copper HSSDC connector
•Support for SNIA HBA API
•64-bit/66 MHz PCI interface
•Optimized Fibre Channel and
SCSI-3 algorithms
•Advanced data interleave architecture
• Full multiple block buffering
TECHNICAL
HIGHLIGHTS
The ATTO ExpressPCI FC 2600 is
designed for high performance with
very low latency for the most demanding
Storage Area Network (SAN) environ-
ments. Using proven technologies and
protocols, the FC 2600 supports all
Fibre Channel topologies and provides
an economical copper connection to
Fibre Channel devices.

Fibre Channel
Environmental and Physical
Characteristics
Dimensions:
•Full form factor: 4.200" x 6.521"
Operating Environment:
•Temperature: 0-50º C
•Humidity: 10-90% non-condensing
•Airflow: 100 LFM (min.)
Power:
• 1 Amp @ 5 Volts
PCI Signal Compatibility:
•3.3 Volts/5 Volts universal
ATTO ExpressPCI FC 2600
Hardware Specifications
Fibre Channel Interface:
• 1.0625-Gigabit data-transfer rates
• 200 MB/sec. throughput in full duplex mode
• Fixed copper HSSDC Fibre Channel connector
• Supports all Fibre Channel topologies
• Point-to-Point
• Arbitrated Loop
• Direct Fabric/Switch Attach
• Strict adherence to ANSI FC-AL-2, FC-PLDA,
FC-Tape, and FC-FLA specifications
• Supports Class 2, Class 3 and Intermix
transfers
• Flash ROM for easy field upgrades
Advanced FC Features:
• Support for SNIA HBA API
• LUN Masking
• Supports Target and Initiator Modes
Advanced SCSI-FCP Support:
•Large command FIFO
• Asynchronous I/O support
• ASPI and SCSI Manager 4.3 compatible
• SCSI-3 tagged command queuing
• Bootable from attached disks
• Support for multiple block sizes
Accelerated PCI Bus Management:
•PCI bus master rate of 528 MB/sec.
• PCI 2.2 compliant
• 64-bit/66 MHz PCI (backward compatible
with 32-bit and 33 MHz PCI)
Software Specifications
Driver Support:
•Windows® 2000
•Windows XP
•Windows Server 2003
• Linux
• Solaris (x86 and SPARC)
• Mac® OS X
• Mac OS 9
Advanced Data Streaming (ADS™):
•Improved PCI system bandwidth use
• Optimized FC and SCSI-3 algorithms
• Tagged command queuing
• RISC processor for high performance
RAID kits available
©2003 ATTO Technology, Inc. Specifications subject to change without notice. PRMA-0264-000
Configuration:
•Easy to install connection plate with LED
to monitor on-line status
LED indicates
online status
Copper HSSDC
connector
Fibre Channel Host Adapter
Selection Chart
* per channel
PRODUCT FEATURES FC 3342 FC 3322 FC 3321 FC 3300 FC 3305
Number of FC Channels 42211
Maximum Transfer Rate (MB/sec.) 400* 400* 400* 400 400
32-bit PCI Compatible ••••
64-bit PCI Compatible •••••
Fabric & Loop Support •••••
Cable Distances (max.) 500M 500m 500m 500m 10m
33 MHz PCI Compatible ••••
66 MHz PCI Compatible •••••
133 MHz PCI-X • •
Optical/Copper Interface SW LC SFP SW LC SFP SW LC SFF FixedSWLC HSSDC
Class 2,3 2,3 2,3 2,3 2,3
Full-duplex •••••
RAID Support •••••
Windows® 2000/XP/Server 2003 •••••
Solaris, Linux Linux Linux • •
Mac® OS and Mac OS X Support OS X OS X OS X • •
Single & Multi-Channel 2-Gigabit Adapters