ATTOLLO ENGINEERING WASP-200 LRF User manual

The WASP-200 LRF is an ultra-compact rangefinder
that is capable of identifying targets up to 200 meters
away. This quick start guide will get you up and
running within 10 minutes. You will need the
following:
1) WASP-200 LRF (SKU: CG1-001)
2) Attollo USB Adapter (SKU: WASP-BRD-USB01)
3) WASP-LRF Cable Set (SKU: WASP-CBL-DF13)
4) USB Cable (Mini-B termination)
5) A Windows-based Computer
6) Terminal Emulation software such as “Termite”
which can be downloaded here:
https://www.compuphase.com/software_termite.htm
QUICK START GUIDE - WASP-200 LRF
The WASP-200 LRF is a LASER PRODUCT designed to be
consistent with OEM Class 1 Requirements. It is specifically
designed for incorporation into a system that includes
proper laser warning labels and safety controls. DO NOT
STARE directly into the apertures of the WASP-200 LRF.
www.attolloengineering.com [e-mail]

STEP 1: Connect WASP-200 LRF unit to a PC
with the USB adapter and cables as shown:
STEP 2: Open Termite Terminal Emulator software and
configure serial port settings:
STEP 3: Open COM Port and send commands as shown
in the BLUE Text.
“>RNG” takes a single range
“>MAVG4” sets moving average filter to 4 ranges
“>FRQ5” sets the repetitive ranging rate to 5 Hz
“>GO” starts repetitive ranging
“>STP” stops the repetitive ranging
www.attolloengineering.com [e-mail]
QUICK START GUIDE - WASP-200 LRF
The WASP-200 LRF is a LASER PRODUCT designed to be
consistent with OEM Class 1 Requirements. It is specifically
designed for incorporation into a system that includes
proper laser warning labels and safety controls. DO NOT
STARE directly into the apertures of the WASP-200 LRF.