ATZ HDMI-V2-88HE150 User manual

pg. 1
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
This 18Gbps 8x8 HDBaseT(150M) Matrix can connect 8 HDMI sources to 16 displays. It features
8 HDMI outputs and each HDMI output is mirrored to provide a CAT-Cable output which runs
simultaneously. HDBaseT output can extend video transmission distance up to 492ft / 150m via a
single Cat 5e/6/7 cable and the resolution is up to 4K2K@60Hz 4:4:4. Audio de-embedded to
analog and coaxial audio is supported. Each HDMI output supports 4K2K to 1080P downscaler
independently.
The product supports IR matrix. The IR signal is one-to-one control at the Matrix end, but the IR
signal follows HDMI video channel at the HDBaseT Receiver end.
The product provides an intuitive set of front panel with OLED screen and supports control via
front panel buttons, IR remote, RS-232, LAN, and Web GUI.

pg. 2
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
Features:
•HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
•Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI & HDBaseT ports
•8 HDMI inputs, 8 HDMI & HDBaseT mirrored outputs
•HDMI ports transmit 18Gbps lossless uncompressed video bandwidth
•Support 18Gbps lossless compressed HDBaseT signal transmission
•Support 4K->1080P Down Scaler for each output port
•HDR, HDR10, HDR10+, Dolby Vision, HLG are supported
•HDBaseT output can extend video transmission distance up to 492ft / 150m for 1080P or 394ft
/ 120m for 4K2K via a single Cat 5e/6/7 cable
•HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD Master
Audio)
•Support IR matrix
•Audio de-embedded is supported via analog and coax ports
•Advanced EDID management and CEC control are supported
•24V POC on all HDBaseT ports
•1U rack mounted design with front panel OLED display
•Control via front panel buttons, IR remote, RS-232, LAN and Web GUI
Specifications:
Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 and HDCP 1.x
Video Bandwidth 18Gbps
Video Resolution Up to 4K2K@50/60Hz (4:4:4)
Color Space RGB 4:4:4, YCbCr 4:4:4/4:2:2/4:2:0
Color Depth
8-bit, 10-bit, 12-bit (1080p@60Hz) 8-bit
(4K2K@60Hz YUV4:4:4)
8-bit，10-bit,12-bit (4K2K@60Hz YCbCr 4:2:2/4:2:0）
HDR HDR10, HDR10+, Dolby Vision, HLG
HDMI Audio
Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital
Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
Coax Audio Formats PCM 2.0, Dolby Digital / Plus, DTS 2.0/5.1
Analog PCM2.0CH

pg. 3
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
Balanced
Audio Formats
Vmax 2Vrms
SNR ＞90dB
THD+N Ratio ＜0.1%（V_max）0.001%~0.01%（V_best）
Crosstalk ＞80dB
Frequency
Response 20Hz~20kHz ±0.5dB
ESD Protection Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Connection
Matrix
Inputs: 8 x HDMI Type A [19-pin female]
Outputs: 8 x HDMI Type A [19-pin female]
8 x HDBaseT port [RJ45]
8 x Coaxial audio [3.5mm Stereo Mini-jack]
8 x balanced analog audio [5-pin Phoenix conn
Controls:9 x IR IN [3.5mm Stereo Mini-jack]
8 x IR OUT [3.5mm Stereo Mini-jack]
1 x TCP/IP RJ45
1 x RS-232 [D-Sub 9]
`
Input: 1 x HDBT IN [RJ45, 8-pin female]
Outputs: 1 x HDMI Type A [19-pin female]
1 x AUDIO OUT [3.5mm Stereo Mini-jack]
Controls: 1 x IR IN [3.5mm Stereo Mini-jack]
1 x IR OUT [3.5mm Stereo Mini-jack]
1 x RS-232 [3-pin Phoenix connector]
1 x SERVICE [Mini-USB, Update port]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions Matrix: 440mm (W) × 374mm (D) × 88.6mm (H) Receiver:
140mm (W) x 65mm (W) x 18mm (W)
Weight Matrix: 6.54Kg, Receiver: 155g
Power Supply AC 100 - 240V 50/60Hz
Power Consumption 125W (Max)
Operating 0°C ~ 40°C / 32°F ~ 104°F

pg. 4
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
Temperature
Storage
Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
Resolution /
Distance
4K60 - Feet / Meters
CAT5e/6/7 492ft / 150M
Resolution / Cable
length
4K60 -
Feet / Meters
4K30 -
Feet / Meters
1080P60 -
Feet / Meters
HDMI IN / OUT 16ft / 5M 32ft / 10M 50ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Matrix Panel
Front Panel:
No.
Name
Function Description
1OLED screen Display matrix switching status, input / output port, EDID,
Baud rate, IP Address.
2Power LED The LED will illuminate in green when the product is working normally,
and red when the product is on standby.
3
OUTPUT /
INPUT buttons
You need to press an output button (1~8) firstly and then press an
input button (1~8) to select the corresponding input source for the
output port.

pg. 5
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
4
MENU / ENTER
/ UP /DOWN
①
EDID setting: On the initial OLED display screen, press
“MENU” button to enter “Select EDID” interface, press
“UP/DOWN” button to select the required EDID, and press the
“ENTER” button to enter “Copy to Input:” interface. Then press
“UP/DOWN” button to select the input port you need to set,
and press “ENTER” button again to confirm.
② Baud rate setting: On the initial OLED display screen, press
“MENU” button twice to enter “SELECT BAUD” interface, and
press “UP/DOWN” button to select the required Baud rate,
finally press the “ENTER” button to confirm the setting.
③ IP Address Check: On the initial OLED display screen,
press “MENU” button three times to enter the IP interface and
check the current IP address, then press “UP/DOWN” button to
switch DHCP ON/OFF, finally press the “ENTER” button to
confirm the setting. Pressing the “MENU” button again will return
to the initial OLED display status.
5 POWER button
Press and hold the POWER button for 3 seconds to enter the
standby mode, then press the button again to wake up the
device.
6IR Window IR receiver window, it only receives the IR remote signal from this
product.
7LOCK button Press the LOCK button to lock front panel buttons (Except the
power button); Press the button again to unlock.
Rear Panel:
No
.
Name
Function
Description
1IR OUT (1-8/
ALL) ports
Connect to IR blaster cable, the IR emit signal is from the “IR IN”
port of the HDBaseT Receiver.
2IR IN (1-8/ALL) Connect to IR receiver cable, the IR receive signal will emit
to the “IR

pg.
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
ports OUT” port of the HDBaseT Receiver.
3AUDIO OUT
(1-8) ports
8 groups of coaxial and balanced analog audio mirrored output
ports. AUDIO OUT (1-8) follows the video output of OUTPUT (1-8)
ports.
4CONTROL ports
TCP/IP: The link port for TCP/IP control. Connect to an active
Ethernet link with an RJ45 cable.
RS-232: Command control port. Connect to a PC or control system
with a D-Sub 9-pin cable to control the Matrix.
5GND Connect the housing to the ground.
6POWER input Power port
: Connect to 100~240V AC 50/60Hz power cable.
Power switch: Press the switch to turn on/off the power.
7
OUTPUT (1-8)
ports
HDMI output ports, connect to HDMI display device such as TV or
monitor with an HDMI cable.
HDBT mirrored output ports, connect to HDBaseT Receiver via
CAT cable.
8INPUT (1-8)
ports
HDMI input ports, connect to HDMI source device such as DVD or
PS4 with an HDMI cable.

pg. 7
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
HDBaseT Receiver Panel
No. Name Function Description
1Power LED Red LED will be on when the receiver is powered on.
2SERVICE port Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note: The Matrix supports POC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn’t need power supply.
4HDBT IN RJ45 connector for connecting the HDBT OUTPUT port of Matrix with
a CAT cable.
5
Connection
Signal Indicator
lamp
▪ Illuminating: Matrix and Receiver are in goodconnection status.
▪ Flashing: Matrix and Receiver are in poor connection status.
▪ Dark: Matrix and Receiver are not connected.
6
Data Signal
Indicator
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7HDMI OUT HDMI output port, connect to HDMI display device such as TV or
monitor with HDMI cable.
8AUDIO OUT Analog audio output port. The audio is extracted from HDMI signal.
9 IR IN Connect to IR receiver cable, the IR receive signal will emit to the “IR
OUT” port of the Matrix .
10 IR OUT Connect to IR blaster cable, the IR emit signal is from the “IR IN” port of
the Matrix.
11 RS-232 Connect to a PC or control system with a 3-pin phoenix connector cable
to transmit command between the Matrix and HDBaseT Receiver.

pg. 8
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
IR Remote
IR Control System
The product is not only a matrix switch but also an extender. It supports bi-directional IR
control. When Matrix is connected to HDBaseT Receiver through Cat 5e/6/7 cable, you can
control remote display device (HDBaseT) or input source device (Matrix) through IR signal
transmission. But you must note that the IR signal transmission method is different from the
method from Matrix (local) to HDBaseT Receiver (remote) and from HDBaseT Receiver
(remote) to Matrix (local).
At the Matrix end (Local end): the IR signal is one-to-one transmission. For example, the IR
IN 1 port signal of the Matrix will emit to IR OUT port of the HDBaseT Receiver 1, and the
IR IN 3 port signal of the Matrix will emit to IR OUT port of the HDBaseT Receiver 3. It doesn’t
follow the video switch to change. IR IN ALL port signal of the Matrix will emit to all IR OUT ports
of HDBaseT receivers simultaneously. Please see the following connection diagram
①Power on or Standby: Power on the Matrix or set it to
standby mode.
②Input 1/2/3/4/5/6/7/8: Select input source button. :
Select the last or next input source button.
③Output 1/2/3/4/5/6/7/8 button: Select output source
button.
All: Select all output source simultaneously. For example,
when you press the “All” button and then press input “1”
button, at this time the input “1” source will output to all
display devices.
Operation instruction: You need to press the output
button firstly and then press input button to select the
corresponding input source. For example,
Press Output-X
(X means output button from 1 to 8, including “All” button)
Then press Input-Y
(Y means input button from 1 to 8)

pg. 9
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4

pg. 10
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model : ATZ HDMI-V2-88HE150
Description: 8x8 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
At HDBaseT receiver (Remote end): IR signal follows video switch to change. For example, the
HDMI output signal on the HDBaseT Receiver 1 is from the HDMI INPUT 2 port, so IR input
signal of the HDBaseT Receiver 1 will emit to IR OUT 2 port of the Matrix. The HDMI output
signal on the HDBaseT Receiver 5 is from the HDMI INPUT 4 port. Then, IR input signal of the
HDBaseT Receiver 5 will emit to IR OUT 4 port of the Matrix etc. Any of HDBaseT Receiver’s
IR IN signal can output from IR OUT ALL port of the Matrix and the IR OUT ALL signal of the
Matrix depends on your IR remote of source device. Please see the following connection
diagram.